Skip to main content
Menu

Advanced Instrumentation Research Group Conference Papers

Conference Papers

 

  1. Henry, MP. “Ultra narrowband filtering with Prism signal processing: design and simulation”, IEEE IECON, Washington DC, Oct 2018.
  2. Owen, J, Henry, MP. “384 TMAC/s FIR filtering on an Artix-7 FPGA using Prism signal processing”, IEEE IECON, Washington DC, Oct 2018.
  3. Henry, MP, Ibryaeva, O, Semenov, A. “Measurement Validation for ICPS: Matrix Pencil Method for Coriolis Metering with Liquid/Gas Flow”, 1st IEEE International Conference on Industrial Cyber-Physical Systems (ICPS-2018). May 2018.
  4. Henry, MP, Ibryaeva, O, Taranenko, P, Tombs, M, Zhou, FB. “Matrix Pencil Method for Coriolis Metering with Liquid/Gas Flow II: Experimental Results”, 1st IEEE International Conference on Industrial Cyber-Physical Systems (ICPS-2018). May 2018.
  5. Henry, MP, Sinitsin, V. “Prism Signal Processing for Machine Condition Monitoring I: Design and Simulation”, 1st IEEE International Conference on Industrial Cyber-Physical Systems (ICPS-2018). May 2018.
  6. Henry, MP, Sinitsin, V. “Prism Signal Processing for Machine Condition Monitoring II: Experimental Data and Fault Detection”, 1st IEEE International Conference on Industrial Cyber-Physical Systems (ICPS-2018). May 2018.
  7. Leach F, Davy M, Henry M, Tombs M, Zhou F. “A new method for measuring fuel flow in an individual injection in real time”, WCX: SAE World Congress Experience, Detroit, MI, USA. Apr 2018.
  8. Henry, MP. “Measurement Validation for the Internet of Things”. 2nd International Ural Conference on Measurement: Status and Prospects of Development, Chelyabinsk, October 2017.
  9. Henry, MP. “Prism Signal Processing: A Recursive FIR Technique Applied to the Efficient Tracking of Resonant Sensor Systems”, 3rd International Conference on Microfluidic Handling Systems, Enschede, Holland, October 2017. 
  10. Henry, MP. “An Introduction to Prism Signal Processing”. Flow Measurement Institute Conference, Coventry, UK, July 2017.
  11. Tombs, MS, Henry, MP, Zhou, FB. “Prism Signal Processing for Dual Mode Coriolis Flow Metering”. Flow Measurement Institute Conference, Coventry, UK, July 2017.
  12. Leach, F, Davies, M, Tombs, MS, Henry, MP, Zhou, FB. “Prism Signal Processing for Dual Mode Coriolis Flow Metering”. Flow Measurement Institute Conference, Coventry, UK, July 2017.
  13. Henry, MP. “An Introduction to Prism Signal Processing”. International Scientific and Practical Conference "175 years of the D.I. Mendeleyev Institute for Metrology (VNIIM) and National Measurement System", St. Petersburg June, 2017.
  14. Henry, MP, Bushuev, O, Ibryaeva, O. “Prism Signal Monitoring for Sensor Condition Monitoring”. IEEE International Conference on Industrial Electronics, Edinburgh, UK, June 2017. DOI: 10.1109/ISIE.2017.8001451
  15. Li, Ming, Henry, MP. “Complex Bandpass Filtering for Coriolis Mass Flow Meter Signal Processing”, The 42nd Annual Conference of IEEE Industrial Electronics Society (IECON), Florence, October 24-27, 2016.
  16. Henry, MP. “Coriolis or Mass Flow Meters Development and Uses in the Oil and Gas Industry”, Seminar on Flow Measurement and its Challenges for the Oil & Gas Industry, Singapore, 21 March, 2016.
  17. Li, Ming, Henry, MP. “Signal Processing Methods for Coriolis Mass Flow Metering in Two-Phase Flow Conditions”, 2016 IEEE International Conference on Industrial Technology (ICIT), Taipei, March 15-17, 2016.
  18. Henry, MP, Tombs, M, Zhou, F, Zamora, M. “Field Experience of Well Testing using a Coriolis-based Three-Phase Flow Meter”, International Flow Measurement Conference 2015, Warwick, 1-2 July 2015.
  19. Zhou, F, Henry, MP, Tombs, M. “Laboratory and Field Trials of Coriolis Mass Flow Metering for Three-Phase Flow Measurement”, 8th International Symposium on Measurement Techniques for Multiphase Flows, Guangzhou, P.R. China, Dec 2013.
  20. Henry, MP, Tombs, M, Zhou, F, Zamora, M. “Three-Phase Flow Measurement using Coriolis Mass Flow Metering”, Flowmeko Conference, Paris, France, 26 September 2013.
  21. Henry, MP, Tombs, M, Zhou, F. “Towards assessing on-line uncertainty for three-phase flow metering in the oil and gas industry”, 11th International Symposium of Measurement Technology and Intelligent Instruments, Aachen, Germany , 3 July 2013.
  22. Henry, MP. “Three-Phase Flow Measurement for the Oil and Gas Industry using Coriolis Mass Flow Metering”, HMS Oil and Gas Conference, Tyumen, Russia, 1 November, 2012.
  23. Henry, MP. Plenary Talk: “Three-Phase Flow Measurement for the Oil and Gas Industry using Coriolis Mass Flow Metering”, Measurements, Present Situation, Perspectives for Development, Southern Urals State University, Chelyabinsk, Russia, 25 September, 2012. 
  24. Henry, MP, Tombs, M, Zamora, M, Zhou, F, Casimiro, R, “Coriolis-based three-phase flow metering for upstream oil and gas”, The Americas Flow Measurement Conference, Huston, April 2012.
  25. Henry, MP. Plenary Address, “Towards smarter and greener flow measurement – multiphase flow metering in the oil and gas industry”, FCRI Global Low Conference, Kerala, India, 18-20 January 2012.
  26. Henry, MP. “New Applications for Coriolis Meter-Based Multi-Phase Flow Metering in the Oil and Gas Industries”. The 10th International Symposium on Measurement Technology and Intelligent Instruments, Daejeon, Korea, June 2011.
  27. Henry, MP. “Condition Monitoring for Ship Fuel (Bunkering) Applications”. 7th International Conference on Condition Monitoring and Machinery Failure Prevention Technologies CM2010/MFPT2010, Stratford, June 2010.
  28. Henry, MP. “Chairman’s Introduction: The Case for Bunker Metering”. Petrospot Bunker Seminar, Dubai, April 2010.
  29. Henry, MP. “The Story So Far”. Petrospot Bunker Seminar, Dubai, April 2010.
  30. Henry, MP. “Case Study 3. Singapore: The ‘Pride’, Invensys and BP”. Petrospot Bunker Seminar, Dubai, April 2010.
  31. Henry, MP. “Chairman’s Introduction: The Case for Bunker Metering”. Aracon 2010, Rotterdam, March 2010.
  32. Henry, MP. “The Story So Far”. Aracon 2010, Rotterdam, March 2010.
  33. Henry, MP. “Case Study 4. Singapore: The ‘Pride’, Invensys and BP”. Aracon 2010, Rotterdam, March 2010.
  34. Henry, MP. “Measurement and Pipelining Issues Raised by Carbon Capture and Storage (CCS)”. 4th Annual Oil and Gas Pipeline Integrity Management and Maintenance Forum, London, February 2010.
  35. Henry, MP. “Chairman’s Introduction: Taking Bunker Metering to the Next Level”. The Bunkering Symposium 2009, Antwerp, November 2009.
  36. Henry, MP. “The Story So Far”. The Bunkering Symposium 2009, Antwerp, November 2009.
  37. Henry, MP. “Case Study 4. Singapore: The ‘Pride’, Invensys and BP”. The Bunkering Symposium 2009, Antwerp, November 2009.
  38. Henry, MP. “Chairman’s Introduction. Preparing for the Revolution: The Case for Bunker Metering”. Petrospot Bunker Seminar, Singapore, September 2009.
  39. Henry, MP. “Case Study. Singapore: The ‘Pride’, Invensys and BP”. Petrospot Bunker Seminar, Singapore, September 2009.
  40. Henry, MP. “Meter Bunker Quantity – Latest Developments”. ACI 2nd Bunker Fuel Management Event, London, September 2009.
  41. Henry, MP. “Workshop on metering for bunkering”. Maritime Week Americas Bunkering Conference, Miami, June 2009.
  42. Henry, MP. “In-line Coriolis metering for bunkering”. Maritime Week Americas Bunkering Conference, Miami, June 2009.
  43. Henry, MP. “In-line metering and on-line monitoring”. The Bunkering Symposium, Antwerp, Dec 2008.
  44. Henry, MP. “In-line metering”, IBIA Annual conference, Cape Town, South Africa, Nov 2008.
  45. Henry, MP and Monmasson, E. “FPGAs used in Industrial Control and Instrumentation Systems”, IEEE International Symposium on Industrial Electronics, Cambridge, June 2008.
  46. Green, T, Henry, MP. “Measurement and Control of Two-Phase CO2 Injection for Oilfield Management”. Multiphase Measurement Roundtable, Pasadena, Texas, USA, April 2008.
  47. Henry, MP. “Assuring Accurate Flow Measurement”, Oil and Gas Pipeline Integrity Management Forum, Berlin, Jan 2008.
  48. Duta, MD, Henry, MP. “Consistency Checking and Combining Measurement Results for a Wireless Sensor Network.” 8th International Symposium on Measurement Technology and Intelligent Instruments, Sendai, Japan, Sep 2007.
  49. Zamora, ME, Henry, MP. “FPGA Implementation of Frequency Output and Input using Handel-C” IEEE Industrial Symposium on Industrial Electronics, Vigo, Spain, June 2007.
  50. Machacek, M, Henry, MP. “Coriolis Metering for Fuel Bunkering.” Flowshow, Utrecht, Holland, May 2007.
  51. Lansangan, R, Skinner, J, Henry, MP. “Wet Gas Measurement using Coriolis Mass Flow Metering – Wamsutter Field Trials”. Multiphase Measurement Roundtable, Galveston, Texas, USA, April 2007.
  52. Henry, MP. “Flow Metering: Accessing New Levels of Accuracy”, Oil and Gas Pipeline Integrity Management Forum, Budapest, Jan 2007.
  53. Henry, MP, Tombs, MS, Duta, MD, Kenyery, F, Shen, J, Morles, M, Garcia, C, Langansan, R. “Two phase (gas/liquid) flow metering of viscous oil using a Coriolis mass flow meter: a case study”, 24th International North Sea Flow Measurement Workshop, Aberdeen, Oct 2006.
  54. Henry, MP, Tombs, MS, Duta, MD, Kenyery, F, Shen, J, Morles, M, Garcia, C, Langansan, R. “Two phase (gas/liquid) flow metering of viscous oil using a Coriolis mass flow meter: a case study”, ISA Show, Houston, Oct 2006.
  55. Henry, MP. “Consistency Checking and Combining Measurement Results.” International Seminar on Mathematics, Statistics, and Computation for evaluating Measurement Quality, St. Petersburg, Russia, June 2006.
  56. Henry, MP. “Validation for Micro- and Nano Sensors”. Invited presentation, Nanotech Conference, Boston, May 2006.
  57. Langansan, RM, Reese, M, Henry, MP. “Coriolis Meter for Custody Transfer “Application performance of the Foxboro CFS20 Coriolis meter and CFT50 transmitter with small volume prover”, 5th International South East Asia Hydrocarbon Flow Measurement Workshop, Kuala Lumpur, March 2006.
  58. Henry, MP. “The sensor self-validation concept”, Sensoren und Messsysteme 2006, Freiburg, Germany, March 2006.
  59. Henry, MP. “Sensor Validation for Data Quality and Asset Management”, Euro TechCon 2005, Chester, Nov 2005.
  60. Sapozhnikova, K, Henry, MP, Taymanov, R.”The Need for Standards in Self-Diagnosing and Self-Validating Instrumentation”. Joint International IMEKO TC1 + TC7 Symposium, Ilmenau, Germany, Sep 2005.
  61. I. Gyongy and D. Clarke, "Active versus passive loop monitoring,'' in IEE colloquium, June, 2005.
  62. Henry, MP, Tombs, MS, and Yeung, H. “Coriolis meter in two phase flows,” in 12th International Conference on Multiphase Production Technology '05 Barcelona, Spain: 25-27 May, 2005  
  63. R. M. Lansangan, R. E. Dutton, M. S. Tombs, M. P. Henry, and M. D. Duta, "Three-phase flow measurement technique using a Coriolis flow meter and a water cut probe,'' in NEL 4th South East Asia Hydrocarbon Flow Measurement Workshop, March 2005.
  64. M. P. Henry, "A fault tolerant interface for self validating sensors,'' in IEE Colloquium on Condition Monitoring and Fault Tolerance Digest No.145
  65. M. P. Henry, "Overview of techniques,'' in IEE Railway Condition Monitoring Conference London, February 2005.
  66. M. P. Tombs M. S. Henry, H. Yeung, and R. Lansangan, "Coriolis mass flow meter developments: Increasing the range of applications in oil & gas production and processing.'' in NEL north sea flow conference, October 2004.
  67. M. P. Henry, M. E. Zamora, C. Clark, R. Cheesewright, and W. M. Mattar, "The dynamic response of Coriolis mass flow meters: Theory and applications,'' in ISA, Houston October, 2004.
  68. M. P. Henry, M. D. Duta, M. S. Tombs, H. Yeung, and W. M. Mattar, ``How a Coriolis mass flow meter can operate in two phase (gas/liquid) flow,'' in ISA, Houston October, 2004.
  69. C. Clark, R. Cheesewright, S. Wang, M. P. Henry, M. E. Zamora, and M. S. Tombs, "A radically new dynamic response capability for Coriolis flow meters,'' in Eurosensors XVIII, Rome, September 2004.
  70. R. Mercado, "SEVA and Coriolis flow metering,'' in ACPLT Summer colloquium, Aachen, Germany, July 2004.
  71. M. P. Henry and M. D. Duta, "Advances in self-validating instrumentation,'' in 10th IMEKO TC7 International Symposium, Saint-Petersburg, Russia, June 30-July 2 2004.
  72. M. P. Henry, “Intelligent Sensors, (including SEVA and IEEE 1451)”, IEE Seminar on “The Importance of Industrial Standards”, Birmingham, May 2004.
  73. J. Yeung, H. Hemp, M. P. Henry, and M. S. Tombs, "Coriolis meter in liquid/liquid, gas/liquid and gas/liquid/liquid flows.,'' in 3rd International SE Asia Hydrocarbon Flow Measurement Workshop, Singapore, March 2004.
  74. M. P. Henry, “Pushing Coriolis Mass Flow Metering to the Limit.” Flowshow, Delft, Holland, Nov 2003.
  75. M. P. Henry, “Towards Self-validating Instrumentation”. Instrumentation Group Meeting, Institute of Manufacturing, Cambridge, Nov 2003.
  76.  M. P. Henry, "Coriolis meter digital transmitter technology: emerging themes,'' in IEE One Day Seminar on Advanced Coriolis Mass Flow Metering Ref No.03/10224, 2003.
  77. F. B. Zhou, M. D. Duta, M. P. Henry, S. Baker, and C. Burton, "Remote condition monitoring for railway point machine,'' in Proceedings of the 2002 ASME/IEEE Joint Railroad Conference IEEE Cat. No.02CH37356, pp. 103-8, Nov 2002.
  78.  M. P. Henry, “Sensor Concepts”, UKACC Control Conference, Sheffield, September 2002.
  79. M. P. Henry, Tombs, MS, Zhou, FB. “The Development of Near-Commercial Instruments from University Research”, UKACC Control Conference, Sheffield, September 2002.
  80. F. B. Zhou, Duta, MD, Henry, MP, Baker, S, and Burton, C. “Remote condition monitoring for railway point machine,” in Proceedings of the 2002 ASME/IEEE Joint Railroad Conference IEEE Cat. No.02CH37356, pp. 103-8, 2002.
  81. M. P. Henry, “Self-Validating  Sensors”, 21st ACT Club Plenary Meeting, “Intelligence in Safety Systems: Sensors, Computing and Control”, Glasgow, July 2002.
  82. M. P. Henry, “Self-Validating Measurement”. Sensors in Water Interest Group conference on “Quality of Environment and Process Measurement”, Cranfield, Jan 2002.
  83. M. P. Henry, “Sensor Validation in Gas Flow Measurement”. 4th Practical Developments in Gas Flow Metering Workshop, Aberdeen, 2001.
  84. G. Tortora, B. Kouvaritakis, and D. W. Clarke, "Steady state plant availability under sensor/actuator faults,'' in Proceedings IASTED International Conference Modelling, Identification, and Control, pp. 649-54, 2001.
  85. F. B. Zhou, M. D. Duta, M. P. Henry, S. Baker, and C. Burton, "Condition monitoring and validation of railway point machines,'' in IEE Seminar Intelligent and Self Validating Instruments Sensors and Actuators Ref. No.01/179, pp. 6/1-7, 2001.
  86. M. P. Henry, “Hardware Compilation and Sensor Validation” Celoxica User Conference, Warwick, April 2001.
  87. M. P. Henry, “Sensor Validation: Towards Standards and Products”. International Conference on Automation and Decision-Making, Milan, November 2000.
  88. Y. Wen, Henry, MP. “Characterising Cavitation Noise by Wavelet Packet Representation”, IMEKO World Congress, Vienna, September 2000.
  89. M. P. Henry, “Towards standards and products for sensor validation in flow measurement”, Flow Measurement 2001 – National Engineering Laboratory International Conference, Peebles, 2001.
  90. M. P. Henry, “Sensor Validation for Fieldbus”. FACES Roadshow, May, 2000.
  91. M. P. Henry, "A self validating digital Coriolis mass flow meter,'' in IEE Colloquium Intelligent and Self Validating Sensors Ref. No.1999/160, 1999. 2/1-5.
  92. D. W. Clarke, "Validation of sensors, actuators and processes,'' in Interkama Control Conference & Trade Fair (Germany), 1999. 1-8.
  93. F. Zhou, N. Archer, J. Bowles, D. W. Clarke, M. P. Henry, and C. Peters, "A general hardware platform for sensor validation,'' in IEE Colloquium Intelligent and Self Validating Sensors Ref. No.1999/160, 1999. 14/1-5.
  94. M. P. Henry, Kaijser, K. “A self-validating, digital Coriolis mass flow meter”, Proces Automatisering Dagen ’99, Rotterdam, Holland, October 1999.
  95. M. P. Henry, and Leahy, MJ. “P-Net and Sensor Validation”, P-Net User Conference, Oxford, September 1997.
  96. M. P. Henry, “User Requirements for Sensor Validation”. IEE Colloquium on Intelligent Sensors, Leicester, September 1996. 
  97. M. P. Henry, “The SEVA Project”. Colloquium on Validation for Plant and Process Monitoring, RWTH, Aachen, July 1996.
  98. M. Leahy, O. Maiuri, M. P. Henry, and D. Clarke, "Sensor validation and fieldbus,'' in P-Net conference, Spain, 1996.
  99. M. P. Henry, “Sensor Validation using Fieldbus”, International Fieldbus Conference, Control and Instrumentation Exhibition, Birmingham, May 1996.
  100. M. P. Henry, “Trends in Intelligent Instrumentation for Plant Automation”. Plenary presentation at Italian Association for Automation conference, Automazione '95', Bari, November 1995.
  101. M. P. Henry, “Smart Field Devices and Sensor Validation”. IMC Conference - Fieldbus '95, London, October 95.
  102. M. Atia, J. Bowles, D. Clarke, M. P. Henry, I. Page, G. Randall, and J. Yang, "A self-validating temperature sensor implemented in fpgas,'' in 5th Workshop on Field Programmable Logic and Applications, Oxford, 1995.
  103. M. P. Henry, “Standard Metrics for Sensor Validation”. Control and Instrumentation Conference on Smart Field Instrumentation, Birmingham, May 1995.
  104. M. P. Henry, "Intelligent sensors and the need for new metrics,'' in IEE Colloquium on `Fieldbus Devices A Changing Future’ Digest No.1994/236, 1994. 3/1-3.
  105. M. P. Henry, "The integration of fault detection within plant wide data quality management,'' in IFAC Symposium on Fault Detection, Supervision and Safety for Technical Processes SAFEPROCESS ’94, vol. 2, pp. 661-666, 1994.
  106. M. P. Henry, "A SEVA sensor: the Coriolis mass flow meter,'' in IFAC Symposium on Fault Detection, Supervision and Safety for Technical Processes SAFEPROCESS ’94, vol. 2T, pp. 457-462, 1994.
  107. Henry, MP. A Self-Validating Sensor: the Foxboro Coriolis Mass Flow Meter. USITT colloquium on “Sensor Update: New Developments in Signal Processing'”, Southampton, September 1993. 
  108. M. P. Henry. “Measurement Validation and System Integration”. Process Industry Journal conference on “On-line Quality Measurement and Assurance”, London, April 1993.
  109. M. P. Henry, “Sensor Validation and Digital Communications”. IMC seminar on Data Communication and Interchange between Machines, London, October, 1992.
  110. M. P. Henry and G. G. Wood, “The Implications of Digital Communications upon Sensor Validation”. IFAC Symposium on “On-line Fault Detection and Supervision in the Chemical Industries'' , Delaware, USA, April 1992.
  111. M. P. Henry, “A New Approach to Sensor Self-Validation”. IMC/SCI seminar on “Improving Analyser Performance'', London, 30 March 1992.
  112. M. P. Henry, and D. W. Clarke, “A Standard Interface for Self-Validating Sensors”, plenary presentation at IFAC/IMACS Symposium, “Safeprocess”, Baden-Baden, Germany, September 1991.
  113. M. P. Henry, “A Fault-Tolerant Interface for Self-Validating Sensors”. IEE Colloquium on “Condition Monitoring and Fault Tolerance”, November 1990.
  114. M. P. Henry, “Validation of Sensor Systems”. Royal Society of Chemistry Conference on “Automated Methods'', Dorset, October 1990. 
  115. M. P. Henry, “Why Should You Believe Your Sensors?” Conference on “Analysis, Testing and Process Control'', Birmingham, September 1990.
  116. M. P. Henry, “A fault tolerant interface for self validating sensors,” in IEE Colloquium on `Condition Monitoring and Fault Tolerance’ Digest No.145, 1990. 3/1-2
  117. M. P. Henry, “Intelligent Behaviour for Self-Validating Sensors”. IMC/ISA Conference on Advances in Measurement, Birmingham, 2 May 1990.


 

[C1].    Henry, MP. “Ultra narrowband filtering with Prism signal processing: design and simulation”, IEEE IECON, Washington DC, Oct 2018.

Owen, J, Henry, MP. “384 TMAC/s FIR filtering on an Artix-7 FPGA using Prism signal processing”, IEEE IECON, Washington DC, Oct 2018.