Research from the Oxford Hydrogen Lab, University of Oxford
Case studies
Explore examples of experiments we have carried out at the Oxford Hydrogen Research Facility for universities, research institutes and companies.
If you would like us to run a similar experiment or have a different test in mind, get in touch with our facility manager (Alfredo Zafra: alfredo.zafra@eng.ox.ac.uk). We’re happy to discuss your project and design a test around your research question, including experiments beyond those listed on our website.
Measuring hydrogen gas permeation at room temperature
We developed a high-sensitivity gas permeation system using mass spectrometry to measure very low hydrogen fluxes through iron at room temperature. The tests showed that surface oxides could block measurable permeation and that even residual oxygen reduced hydrogen permeability.
Read the paper in Experimental Mechanics (2026)
Assessing hydrogen embrittlement at cryogenic temperatures
In collaboration with the University of Southampton, we compared uncharged and hydrogen-precharged 316plus stainless steel in tensile tests at room temperature, 77 K and 20 K. At cryogenic temperatures, hydrogen reduced ductility by around 40–50%, while the steel retained most of its tensile strength.
Read the paper in International Journal of Hydrogen Energy (2026)
Measuring deuterium retention in Eurofer steel using TDS
In collaboration with UKAEA and the University of Bristol, we used thermal desorption spectroscopy (TDS) to quantify deuterium retention in Eurofer steel following low-energy ion implantation. We calibrated the TDS system specifically for deuterium for this study and resolved three distinct desorption peaks. The specimen implanted at the lowest ion flux for the longest duration retained the most deuterium.
Read the paper in Fusion Engineering and Design (2025)
Measuring hydrogen uptake, diffusion and trapping in Inconel 718
In collaboration with Imperial College London, we successfully charged both wrought and additively manufactured Inconel 718 with hydrogen using electrochemical charging. We measured the hydrogen content, analysed hydrogen trapping and used isothermal thermal desorption spectroscopy (TDS) from room temperature to 400 °C to determine hydrogen diffusivity.
Read the paper in Communications Materials (2024)
Establishing isothermal desorption as a method for measuring hydrogen diffusivity in metals
We established isothermal desorption as an accurate and repeatable technique for measuring hydrogen diffusivity. Isothermal desorption yields hydrogen diffusivity values comparable to those obtained by electrochemical hydrogen permeation, with a two- to threefold reduction in relative scatter. The technique can also be applied to other metals and polymers where hydrogen release can be measured and modelled.
Read the paper in Journal of Natural Gas Science and Engineering (2022)
Read the paper in International Journal of Hydrogen Energy (2023)