Skip to main content

Electrochemical hydrogen charging system, department of Engineering Science, University of Oxford

Electrochemical charging

Our electrochemical hydrogen charging system uses three-electrode electrochemical cells to introduce hydrogen into metallic materials under controlled current or potential and temperature. By adjusting the charging conditions and exposure duration, the system enables different hydrogen concentrations to be achieved for subsequent analysis of hydrogen uptake, trapping and embrittlement.

Capabilities:

  • Charging temperatures from 22 to 90°C

  • Galvanostatic and potentiostatic control using GAMRY instrumentation

  • Controlled current or potential, electrolyte pH and exposure duration

  • Electrolyte recirculation and replacement for long-term charging

  • Hydrogen pre-charging for subsequent mechanical testing and thermal desorption analysis

  • Tailored charging conditions for different metals and engineering alloys

Sample dimensions: A wide range of specimen shapes and sizes can be accommodated. Thick specimens and materials with low hydrogen diffusivity may require prolonged charging times to achieve the desired hydrogen distribution.

Related Publications

W. Li, A. Zafra, L. Armendáriz, Z. Wang, W. Bailey, E. Martínez-Pañeda, S. Afshan. Cryogenic hydrogen embrittlement of 316plus (EN 1.4420) stainless steel at 77 K and 20 K. International Journal of Hydrogen Energy 233 (2026) 154974. https://doi.org/10.1016/j.ijhydene.2026.154974

S. Quan, A. Zafra, E. Martínez-Pañeda, C. Wu, Z.D. Harris, L. Cupertino-Malheiros. New insights into hydrogen-assisted intergranular cracking in nickel. Materials Science and Engineering: A 950 (2026) 149545. https://doi.org/10.1016/j.msea.2025.149545.

C.-T. Santos Maldonado, A. Zafra, E. Martínez-Pañeda, P. Sandmann, R. Morana, M.-S. Pham. Influence of dislocation cells on hydrogen embrittlement in wrought and additively manufactured Inconel 718. Communications Materials 5 (2024) 223. https://doi.org/10.1038/s43246-024-00654-6

A. Zafra, Z. Harris, E. Korec, E. Martínez-Pañeda. On the relative efficacy of electropermeation and isothermal desorption approaches for measuring hydrogen diffusivity. International Journal of Hydrogen Energy 48 (2023) 1218–1233. https://doi.org/10.1016/j.ijhydene.2022.10.025

A. Zafra, Z. Harris, C. Sun, E. Martínez-Pañeda. Comparison of hydrogen diffusivities measured by electrochemical permeation and temperature-programmed desorption in cold-rolled pure iron. Journal of Natural Gas Science and Engineering 98 (2022) 104365. https://doi.org/10.1016/j.jngse.2021.104365

Oxford Hydrogen Research Facility · Jenkin Building, Ground Floor (lab 10.09) · Department of Engineering Science, University of Oxford · Enquiries: