Skip to main content

Electrochemical hydrogen permeation system, department of Engineering Science, University of Oxford

Electrochemical Permeation

Our electrochemical hydrogen permeation system measures hydrogen transport through metallic materials under controlled electrochemical conditions. By monitoring hydrogen permeation during charging and discharge, the technique enables the determination of effective hydrogen diffusivity and assessment of hydrogen uptake, trapping and surface effects.

Capabilities:

  • Testing temperatures from 22 to 80°C

  • Galvanostatic and potentiostatic control using GAMRY instrumentation

  • Measurement of hydrogen permeation transients and steady-state flux

  • Determination of effective hydrogen diffusivity and apparent subsurface hydrogen concentration

  • Repeated charging and discharge transients to investigate hydrogen trapping

  • Evaluation of metals, engineering alloys, coatings and surface treatments

Sample dimensions: Flat specimens of approximately 25 × 25 mm are ideal. Thickness is selected according to hydrogen diffusivity, typically ranging from approximately 200 µm for austenitic steels and nickel-based alloys to a few millimetres for ferritic steels. Careful surface preparation and conditioning are essential for reliable measurements, as oxides, roughness and contamination can affect hydrogen entry and detection. Palladium and nickel coatings can be applied as required.

Related Publications

L. Cupertino-Malheiros, M. Duportal, T. Hageman, A. Zafra, E. Martínez-Pañeda. Hydrogen uptake kinetics of cathodic polarized metals in aqueous electrolytes. Corrosion Science 231 (2024) 111959. https://doi.org/10.1016/j.corsci.2024.111959. sciencedirect.com

A. Zafra, Z. Harris, E. Korec, E. Martínez-Pañeda. On the relative efficacy of electropermeation and isothermal desorption approaches for measuring hydrogen diffusivity. International Journal of Hydrogen Energy 48 (2023) 1218–1233. https://doi.org/10.1016/j.ijhydene.2022.10.025

A. Zafra, Z. Harris, C. Sun, E. Martínez-Pañeda. Comparison of hydrogen diffusivities measured by electrochemical permeation and temperature-programmed desorption in cold-rolled pure iron. Journal of Natural Gas Science and Engineering 98 (2022) 104365. https://doi.org/10.1016/j.jngse.2021.104365

A. Díaz, A. Zafra, E. Martínez-Pañeda, J.M. Alegre, J. Belzunce, I.I. Cuesta. Simulation of hydrogen permeation through pure iron for trapping and surface phenomena characterisation. Theoretical and Applied Fracture Mechanics 110 (2020) 102818. https://doi.org/10.1016/j.tafmec.2020.102818

A. Zafra, J. Belzunce, C. Rodríguez. Hydrogen diffusion and trapping in 42CrMo4 quenched and tempered steel: Influence of quenching temperature and plastic deformation. Materials Chemistry and Physics 255 (2020) 123599. https://doi.org/10.1016/j.matchemphys.2020.123599

Oxford Hydrogen Research Facility · Jenkin Building, Ground Floor (lab 10.09) · Department of Engineering Science, University of Oxford · Enquiries: