Skip to main content

Thermal desorption spectroscopy system, department of Engineering Science, University of Oxford

Thermal Desorption Spectroscopy (TDS)

Our ultra-high-vacuum thermal desorption spectroscopy system enables the quantitative analysis of hydrogen in metallic materials. By monitoring hydrogen release during controlled heating or isothermal desorption, the technique can determine hydrogen content, investigate trapping behaviour and measure hydrogen diffusivity over a wide temperature range.

Capabilities:

  • Quantification of total, lattice, diffusible and trapped hydrogen contents

  • Heating from −100 to 1000 °C

  • Heating rates from 1 to 50 °C/min

  • Isothermal desorption for hydrogen diffusion analysis

  • Sensitivity down to 0.01 wppm

  • Measurement of total hydrogen content

  • Cryogenic stage to minimise hydrogen loss before analysis

  • Simultaneous monitoring of multiple gas species (m/z between 1 and 300)

Calibration: The system is calibrated for hydrogen, deuterium and oxygen. Other gas species can be analysed qualitatively, with calibration available upon special request.

Sample dimensions: Samples must be flat, ideally 10 × 10 mm, with maximum dimensions of 11 × 11 mm or an equivalent diameter for circular specimens. Cylindrical samples must be cut into discs before testing. Thicknesses from approximately 0.1–0.2 mm to a few millimetres can be accommodated. Powdered samples can be measured upon special request.

Resources

Download the TDS Simulator app for MATLAB for fast and reliable quantification of hydrogen trapping.

                                         

Related Publications

W. Li, A. Zafra, L. Armendáriz, Z. Wang, W. Bailey, E. Martínez-Pañeda, S. Afshan. Cryogenic hydrogen embrittlement of 316plus (EN 1.4420) stainless steel at 77 K and 20 K. International Journal of Hydrogen Energy 233 (2026) 154974. https://doi.org/10.1016/j.ijhydene.2026.154974

J.A. Pittard, J.A. Smith, A. Zafra, E. Martínez-Pañeda, N.A. Fox. Deuterium ion implantation of Eurofer with a new pulsed DC plasma source. Fusion Engineering and Design 220 (2025) 115321. https://doi.org/10.1016/j.fusengdes.2025.115321

E. García-Macías, Z.D. Harris, E. Martínez-Pañeda. TDS Simulator: A MATLAB App to model temperature-programmed hydrogen desorption. International Journal of Hydrogen Energy 94 (2024) 510–524. https://doi.org/10.1016/j.ijhydene.2024.11.014

C.-T. Santos Maldonado, A. Zafra, E. Martínez-Pañeda, P. Sandmann, R. Morana, M.-S. Pham. Influence of dislocation cells on hydrogen embrittlement in wrought and additively manufactured Inconel 718. Communications Materials 5 (2024) 223. https://doi.org/10.1038/s43246-024-00654-6

A. Zafra, Z. Harris, E. Korec, E. Martínez-Pañeda. On the relative efficacy of electropermeation and isothermal desorption approaches for measuring hydrogen diffusivity. International Journal of Hydrogen Energy 48 (2023) 1218–1233. https://doi.org/10.1016/j.ijhydene.2022.10.025

A. Zafra, Z. Harris, C. Sun, E. Martínez-Pañeda. Comparison of hydrogen diffusivities measured by electrochemical permeation and temperature-programmed desorption in cold-rolled pure iron. Journal of Natural Gas Science and Engineering 98 (2022) 104365. https://doi.org/10.1016/j.jngse.2021.104365

Oxford Hydrogen Research Facility · Jenkin Building, Ground Floor (lab 10.09) · Department of Engineering Science, University of Oxford · Enquiries: