Showing 246 publications by Peter Ireland
Coupled aerothermal-mechanical analysis in single crystal double wall transpiration cooled gas turbine blades with a large film hole density
Courtis M, Skamniotis C, Cocks A & Ireland P (2023), Applied Thermal Engineering, 219
BibTeX
@article{coupledaerother-2023/1,
title={Coupled aerothermal-mechanical analysis in single crystal double wall transpiration cooled gas turbine blades with a large film hole density},
author={Courtis M, Skamniotis C, Cocks A & Ireland P},
journal={Applied Thermal Engineering},
volume={219},
year = "2023"
}
Heat Transfer Coefficient Distribution of W and Broken W Turbulators at High Reynolds Numbers
Ghazi-Hesami S, Wise D, Taylor K, Robert E & Ireland P (2022), Journal of Thermal Science and Engineering Applications, 14(7)
BibTeX
@article{heattransfercoe-2022/7,
title={Heat Transfer Coefficient Distribution of W and Broken W Turbulators at High Reynolds Numbers},
author={Ghazi-Hesami S, Wise D, Taylor K, Robert E & Ireland P},
journal={Journal of Thermal Science and Engineering Applications},
volume={14},
year = "2022"
}
Heat Transfer and Pressure Drop of an Angled Discrete Turbulator at Elevated Reynolds Numbers up to 900,000
Ghazi-Hesami S, Wise D, Taylor K, Ireland P & Robert É (2022), Journal of Thermal Science and Engineering Applications, 14(7)
BibTeX
@article{heattransferand-2022/7,
title={Heat Transfer and Pressure Drop of an Angled Discrete Turbulator at Elevated Reynolds Numbers up to 900,000},
author={Ghazi-Hesami S, Wise D, Taylor K, Ireland P & Robert É},
journal={Journal of Thermal Science and Engineering Applications},
volume={14},
year = "2022"
}
Rationale Behind EU-DEMO Limiter's Plasma-Facing Component Design Under Material Phase Change
Richiusa ML, Ireland P, Nicholas J & Vizvary Z (2022), IEEE TRANSACTIONS ON PLASMA SCIENCE
A Low Order Flow Network Model for Double-Wall Effusion Cooling Systems
van de Noort M & Ireland P (2022), INTERNATIONAL JOURNAL OF TURBOMACHINERY PROPULSION AND POWER, 7(1)
Mesh sensitivity of RANS simulations on film cooling flow
Jiang Y, Murray A, di Mare L & Ireland P (2022), INTERNATIONAL JOURNAL OF HEAT AND MASS TRANSFER, 182
AXIAL VENTILATION AND BLADE ROW EFFECTS ON TRANSIENT NATURAL CONVECTIVE SHUTDOWN COOLING IN A GAS TURBINE
Fahy DD & Ireland P (2022), Proceedings of the ASME Turbo Expo, 6-B
INFLUENCE OF POROSITY ON DOUBLE-WALLED EFFUSION-COOLED SYSTEMS FOR GAS TURBINE BLADES
Courtis M & Ireland P (2022), Proceedings of the ASME Turbo Expo, 6-A
NUMERICAL INVESTIGATION OF PARTICLE DEPOSITION IN DOUBLE WALL EFFUSION COOLED SYSTEMS
Villain FYA, Vadgama N, Gaskell JG, Ireland PT, McGilvray M et al. (2022), Proceedings of the ASME Turbo Expo, 10-B
LOW ORDER HEAT & MASS FLOW NETWORK MODELLING FOR QUASITRANSPIRATION COOLING SYSTEMS
Van De Noort M, Murray AV & Ireland PT (2022), Proceedings of the ASME Turbo Expo, 6-B
A COMPUTATIONAL APPROACH TO AEROTHERMAL ANALYSIS OF COMPLEX INTERNAL TURBINE COOLING GEOMETRIES
Coulton B, Murray AV & Ireland PT (2022), Proceedings of the ASME Turbo Expo, 6-B
Development of a Novel DEMO divertor target: spiral plate module
Schwartz NR, Nicholas JR, Jackson ZJ & Ireland PT (2021), PHYSICA SCRIPTA, 96(12)
The Effect of Wall Thermal Boundary Condition on Natural Convective Shutdown Cooling in a Gas Turbine
Fahy DD & Ireland P (2021), JOURNAL OF TURBOMACHINERY-TRANSACTIONS OF THE ASME, 143(11)
Aerothermal Effect of Cavity Welding Beads on a Transonic Squealer Tip
Vieira J, Coull J, Ireland P & Romero E (2021), JOURNAL OF TURBOMACHINERY-TRANSACTIONS OF THE ASME, 143(11)
Influence of spanwise and streamwise film hole spacing on adiabatic film effectiveness for effusion-cooled gas turbine blades
Courtis M, Murray A, Coulton B, Ireland P & Mayo I (2021), International Journal of Turbomachinery, Propulsion and Power, 6(3)
BibTeX
@article{influenceofspan-2021/8,
title={Influence of spanwise and streamwise film hole spacing on adiabatic film effectiveness for effusion-cooled gas turbine blades},
author={Courtis M, Murray A, Coulton B, Ireland P & Mayo I},
journal={International Journal of Turbomachinery, Propulsion and Power},
volume={6},
number={37},
publisher={MDPI},
year = "2021"
}
A Comparison of Single-Entry and Multiple-Entry Casing Impingement Manifolds for Active Thermal Tip Clearance Control
Dhopade P, Kirollos B, Ireland P & Lewis L (2021), INTERNATIONAL JOURNAL OF TURBOMACHINERY PROPULSION AND POWER, 6(2)
BibTeX
@article{acomparisonofsi-2021/6,
title={A Comparison of Single-Entry and Multiple-Entry Casing Impingement Manifolds for Active Thermal Tip Clearance Control},
author={Dhopade P, Kirollos B, Ireland P & Lewis L},
journal={INTERNATIONAL JOURNAL OF TURBOMACHINERY PROPULSION AND POWER},
volume={6},
number={ARTN 10},
year = "2021"
}
Experiments of Transpiration Cooling Inspired Panel Cooling on a Turbine Blade Yielding Film Effectiveness Levels over 95%
Wambersie A, Wong H, Ireland P & Mayo I (2021), INTERNATIONAL JOURNAL OF TURBOMACHINERY PROPULSION AND POWER, 6(2)
BibTeX
@article{experimentsoftr-2021/6,
title={Experiments of Transpiration Cooling Inspired Panel Cooling on a Turbine Blade Yielding Film Effectiveness Levels over 95%},
author={Wambersie A, Wong H, Ireland P & Mayo I},
journal={INTERNATIONAL JOURNAL OF TURBOMACHINERY PROPULSION AND POWER},
volume={6},
number={ARTN 16},
year = "2021"
}
An experimentally validated low-order model of the thermal response of double-wall effusion cooling systems for high-pressure turbine blades
Murray AV, Ireland PT & Romero E (2021), Journal of Turbomachinery, 143(11)
BibTeX
@article{anexperimentall-2021/4,
title={An experimentally validated low-order model of the thermal response of double-wall effusion cooling systems for high-pressure turbine blades},
author={Murray AV, Ireland PT & Romero E},
journal={Journal of Turbomachinery},
volume={143},
number={111015},
publisher={ASME International},
year = "2021"
}
Measurements of heat transfer on hemispheres at rarefied flow conditions using liquid crystals
Donaldson N, Doherty L, Merrifield J & Ireland P (2021), Proceedings of the 8th European Conference on Space Debris, 8(1)
BibTeX
@inproceedings{measurementsofh-2021/4,
title={Measurements of heat transfer on hemispheres at rarefied flow conditions using liquid crystals},
author={Donaldson N, Doherty L, Merrifield J & Ireland P},
booktitle={8th European Conference on Space Debris},
year = "2021"
}
The Oxford Magnetic Suspension and Balance System: a brief history & development status
Tombs M, Donaldson N, Doherty L, Owen A, Ireland P et al. (2021), AIAA Scitech 2021 Forum
A LOW ORDER FLOW NETWORK MODEL FOR DOUBLE-WALL EFFUSION COOLING SYSTEMS
van de Noort M & Ireland PT (2021), 14th European Conference on Turbomachinery Fluid Dynamics and Thermodynamics, ETC 2021
BibTeX
@inproceedings{aloworderflowne-2021/1,
title={A LOW ORDER FLOW NETWORK MODEL FOR DOUBLE-WALL EFFUSION COOLING SYSTEMS},
author={van de Noort M & Ireland PT},
year = "2021"
}
Experimental and Computational Methods for the Evaluation of Double-Wall, Effusion Cooling Systems
Murray AV, Ireland PT & Romero E (2020), JOURNAL OF TURBOMACHINERY-TRANSACTIONS OF THE ASME, 142(11)
BibTeX
@article{experimentaland-2020/11,
title={Experimental and Computational Methods for the Evaluation of Double-Wall, Effusion Cooling Systems},
author={Murray AV, Ireland PT & Romero E},
journal={JOURNAL OF TURBOMACHINERY-TRANSACTIONS OF THE ASME},
volume={142},
number={ARTN 111003},
year = "2020"
}
Coolant Jets Interaction in Effusion Cooling System: Experimental and Numerical Study
Jiang Y, Murray AV, Ireland PT & di Mare L (2020), JOURNAL OF TURBOMACHINERY-TRANSACTIONS OF THE ASME, 142(9)
BibTeX
@article{coolantjetsinte-2020/9,
title={Coolant Jets Interaction in Effusion Cooling System: Experimental and Numerical Study},
author={Jiang Y, Murray AV, Ireland PT & di Mare L},
journal={JOURNAL OF TURBOMACHINERY-TRANSACTIONS OF THE ASME},
volume={142},
number={ARTN 091007},
year = "2020"
}
Coolant Jets Blowing Across the Airfoil Stagnation Line to Enhance Film Effectiveness
Holgate NE, Ireland PT & Romero E (2020), JOURNAL OF TURBOMACHINERY-TRANSACTIONS OF THE ASME, 142(6)
Analysis of the Thermomechanical Stresses in Double-Wall Effusion Cooled Systems
Elmukashfi EMA, Murray AV, Ireland PT & Cocks ACF (2020), Journal of Turbomachinery, 142(5)
BibTeX
@article{analysisoftheth-2020/2,
title={Analysis of the Thermomechanical Stresses in Double-Wall Effusion Cooled Systems},
author={Elmukashfi EMA, Murray AV, Ireland PT & Cocks ACF},
journal={Journal of Turbomachinery},
volume={142},
number={051002},
publisher={American Society of Mechanical Engineers},
year = "2020"
}
Thermal matching using Gaussian process regression
Pearce R, Ireland P & Romero E (2020), Proceedings of the Institution of Mechanical Engineers, Part G: Journal of Aerospace Engineering
BibTeX
@article{thermalmatching-2020/1,
title={Thermal matching using Gaussian process regression},
author={Pearce R, Ireland P & Romero E},
journal={Proceedings of the Institution of Mechanical Engineers, Part G: Journal of Aerospace Engineering},
number={954410020901961},
publisher={SAGE},
year = "2020"
}
An experimentally validated low order model of the thermal response of double-wall effusion cooling systems for hp turbine blades
Murray AV, Ireland PT & Romero E (2020), Proceedings of the ASME Turbo Expo, 7A-2020
The effect of wall thermal boundary condition on natural convective shutdown cooling in a gas turbine
Fahy DD & Ireland P (2020), Proceedings of the ASME Turbo Expo, 7C-2020
Aerothermal effect of cavity welding beads on a transonic squealer tip
Vieira J, Coull J, Ireland P & Romero E (2020), Proceedings of the ASME Turbo Expo, 7B-2020
Coolant jets interaction in effusion cooling system: Experimental and numerical study
Jiang Y, Murray AV, Ireland PT & Di Mare L (2019), ASME Turbo Expo 2019: Turbomachinery Technical Conference and Exposition, 5A
BibTeX
@article{coolantjetsinte-2019/11,
title={Coolant jets interaction in effusion cooling system: Experimental and numerical study},
author={Jiang Y, Murray AV, Ireland PT & Di Mare L},
journal={ASME Turbo Expo 2019: Turbomachinery Technical Conference and Exposition},
volume={5A},
publisher={American Society of Mechanical Engineers},
year = "2019"
}
Refurbishment and characterisation of the Oxford Low Density Hypersonic Wind Tunnel
Donaldson N, Doherty L, Ivison W, Wilson C, McGilvray M et al. (2019), Proceedings of the International Conference on Flight Vehicles, Aerothermodynamics and Re-entry Missions and Engineering (FAR 2019)
BibTeX
@inproceedings{refurbishmentan-2019/10,
title={Refurbishment and characterisation of the Oxford Low Density Hypersonic Wind Tunnel},
author={Donaldson N, Doherty L, Ivison W, Wilson C, McGilvray M et al.},
booktitle={International Conference on Flight Vehicles, Aerothermodynamics and Re-entry Missions and Engineering (FAR 2019)},
year = "2019"
}
An experimental-numerical method for transient infrared measurement of film cooling effectiveness and heat transfer coefficient in a single test
Ireland P, Holgate NE & Romero E (2019), Aeronautical Journal
Computational Fluid Dynamics Investigation of the Flow of Trailing Edge Cooling Slots
Jiang YUEWEN, Gurram N, Romero E, Ireland PETER & Di Mare LUCA (2019), Journal of Turbomachinery(7)
Development of a 1D thermofluid code for divertor target plate modeling
Jackson Z, Nicholas J & Ireland P (2019), Fusion Engineering and Design, 147
Experimental and numerical investigation of the effect of compressor ogv profile on combustor exit measurements using an isothermal, non-reacting tracer
Dhopade P, Denman P, Ireland P & Ravikanti M (2019), 12th European Conference on Turbomachinery Fluid Dynamics and Thermodynamics, ETC 2017
Development of a Steady-State Experimental Facility for the Analysis of Double-Wall Effusion Cooling Geometries
Murray ALEXANDER, Ireland PETER & Romero E (2019), JOURNAL OF TURBOMACHINERY-TRANSACTIONS OF THE ASME(4)
An experimental investigation of adiabatic film cooling effectiveness and heat transfer coefficient on a transonic squealer tip
Saul A, Ireland PT, Wong TH, Li H, Coull J et al. (2019), Journal of Turbomachinery, 141(9)
BibTeX
@article{anexperimentali-2019/3,
title={An experimental investigation of adiabatic film cooling effectiveness and heat transfer coefficient on a transonic squealer tip},
author={Saul A, Ireland PT, Wong TH, Li H, Coull J et al.},
journal={Journal of Turbomachinery},
volume={141},
number={091005},
publisher={American Society of Mechanical Engineers},
year = "2019"
}
Computational fluid dynamics investigation of the flow of trailing edge cooling slots
Jiang Y, Gurram N, Romero E, Ireland P & Di Mare L (2019), Journal of Turbomachinery, 141(7), 071002
BibTeX
@article{computationalfl-2019/2,
title={Computational fluid dynamics investigation of the flow of trailing edge cooling slots},
author={Jiang Y, Gurram N, Romero E, Ireland P & Di Mare L},
journal={Journal of Turbomachinery},
volume={141},
pages={071002},
publisher={American Society of Mechanical Engineers},
year = "2019"
}
STUDY OF FILM COOLING EFFECTIVENESS ON A DOUBLE-WALLED EFFUSION-COOLED TURBINE BLADE IN A HIGH-SPEED FLOW USING PRESSURE SENSITIVE PAINT
Ngetich GC, Ireland PT, Romero E & ASME (2019), PROCEEDINGS OF THE ASME TURBO EXPO: TURBOMACHINERY TECHNICAL CONFERENCE AND EXPOSITION, 2019, VOL 5B
BibTeX
@inproceedings{studyoffilmcool-2019/,
title={STUDY OF FILM COOLING EFFECTIVENESS ON A DOUBLE-WALLED EFFUSION-COOLED TURBINE BLADE IN A HIGH-SPEED FLOW USING PRESSURE SENSITIVE PAINT},
author={Ngetich GC, Ireland PT, Romero E & ASME },
year = "2019"
}
EXPERIMENTAL AND COMPUTATIONAL METHODS FOR THE EVALUATION OF DOUBLE-WALL, EFFUSION COOLING SYSTEMS
Murray AV, Ireland PT, Romero E & ASME (2019), PROCEEDINGS OF THE ASME TURBO EXPO: TURBOMACHINERY TECHNICAL CONFERENCE AND EXPOSITION, 2019, VOL 5A
BibTeX
@inproceedings{experimentaland-2019/,
title={EXPERIMENTAL AND COMPUTATIONAL METHODS FOR THE EVALUATION OF DOUBLE-WALL, EFFUSION COOLING SYSTEMS},
author={Murray AV, Ireland PT, Romero E & ASME },
year = "2019"
}
On dynamics of acoustically driven bistable fluidic vvalves
Mair M, Bacic M & Ireland P (2018), Journal of Fluids Engineering, 141(6), 061202
A comparison of experimental and computational heat transfer results for a leading edge impingement system
Pearce R, Ireland PT, Dane E & Telisinghe J (2018), International Journal of Turbomachinery, Propulsion and Power, 3(4), 23
BibTeX
@article{acomparisonofex-2018/11,
title={A comparison of experimental and computational heat transfer results for a leading edge impingement system},
author={Pearce R, Ireland PT, Dane E & Telisinghe J},
journal={International Journal of Turbomachinery, Propulsion and Power},
volume={3},
pages={23},
publisher={MDPI},
year = "2018"
}
The effects of combustor cooling features on nozzle guide vane film cooling experiments
Holgate NE, Ireland PT & Romero E (2018), Journal of Turbomachinery, 141(1), 011005
BibTeX
@article{theeffectsofcom-2018/10,
title={The effects of combustor cooling features on nozzle guide vane film cooling experiments},
author={Holgate NE, Ireland PT & Romero E},
journal={Journal of Turbomachinery},
volume={141},
pages={011005},
publisher={American Society of Mechanical Engineers},
year = "2018"
}
A three-dimensional conjugate approach for analyzing a double-walled effusion-cooled turbine blade
Ngetich GC, Murray A, Ireland P & Romero E (2018), Journal of Turbomachinery, 141(1)
BibTeX
@article{athreedimension-2018/10,
title={A three-dimensional conjugate approach for analyzing a double-walled effusion-cooled turbine blade},
author={Ngetich GC, Murray A, Ireland P & Romero E},
journal={Journal of Turbomachinery},
volume={141},
number={011002},
publisher={American Society of Mechanical Engineers},
year = "2018"
}
Development of a heat sink module for a near-term DEMO divertor
Nicholas JR, Ireland PT, Hancock D & Robertson D (2018), FUSION ENGINEERING AND DESIGN, 133, 77-88
Development of a steady-state experimental facility for the analysis of double-wall effusion cooling geometries
Murray AV, Ireland PT & Romero E (2018), Proceedings of ASME Turbo Expo 2018: Turbomachinery Technical Conference and Exposition
BibTeX
@inproceedings{developmentofas-2018/8,
title={Development of a steady-state experimental facility for the analysis of double-wall effusion cooling geometries},
author={Murray AV, Ireland PT & Romero E},
booktitle={ASME Turbo Expo 2018: Turbomachinery Technical Conference and Exposition},
year = "2018"
}
A 3D conjugate approach for analysing a doublewalled effusion-cooled turbine blade
Ngetich GC, Murray AV, Ireland PT & Romero E (2018), ASME Turbo Expo 2018
A Detailed Study of the Interaction Between Two Rows of Cooling Holes
Jiang Y, Capone L, Ireland P & Romero E (2018), JOURNAL OF TURBOMACHINERY-TRANSACTIONS OF THE ASME, 140(4)
On the real-time estimation of disk temperature spatial distributions in aeroengines
Van Paridon A, Bacic M, Ireland P & Daniel R (2018), Journal of Engineering for Gas Turbines and Power, 140(3), 031901
BibTeX
@article{ontherealtimees-2018/3,
title={On the real-time estimation of disk temperature spatial distributions in aeroengines},
author={Van Paridon A, Bacic M, Ireland P & Daniel R},
journal={Journal of Engineering for Gas Turbines and Power},
volume={140},
pages={031901},
publisher={American Society of Mechanical Engineers},
year = "2018"
}
High Resolution Experimental and Computational Methods for Modelling Multiple Row Effusion Cooling Performance
Murray A, Ireland P, Wong TH, Tang SW & Rawlinson AJ (2018), International Journal of Turbomachinery, Propulsion and Power, 3(1)
BibTeX
@article{highresolutione-2018/1,
title={High Resolution Experimental and Computational Methods for Modelling Multiple Row Effusion Cooling Performance},
author={Murray A, Ireland P, Wong TH, Tang SW & Rawlinson AJ},
journal={International Journal of Turbomachinery, Propulsion and Power},
volume={3},
number={4},
publisher={MDPI},
year = "2018"
}
CFD INVESTIGATION OF THE FLOW OF TRAILING EDGE COOLING SLOTS
Jiang Y, Gurram N, Romero E, Ireland PT, di Mare L et al. (2018), PROCEEDINGS OF THE ASME TURBO EXPO: TURBOMACHINERY TECHNICAL CONFERENCE AND EXPOSITION, 2018, VOL 5C, 677-688
BibTeX
@inproceedings{cfdinvestigatio-2018/,
title={CFD INVESTIGATION OF THE FLOW OF TRAILING EDGE COOLING SLOTS},
author={Jiang Y, Gurram N, Romero E, Ireland PT, di Mare L et al.},
pages={677-688},
year = "2018"
}
AN EXPERIMENTAL INVESTIGATION OF ADIABATIC FILM COOLING EFFECTIVENESS AND HEAT TRANSFER COEFFICIENT ON A TRANSONIC SQUEALER TIP
Saul AJ, Ireland PT, Coull JD, Wong TH, Li H et al. (2018), PROCEEDINGS OF THE ASME TURBO EXPO: TURBOMACHINERY TECHNICAL CONFERENCE AND EXPOSITION, 2018, VOL 5C, 437-448
BibTeX
@inproceedings{anexperimentali-2018/,
title={AN EXPERIMENTAL INVESTIGATION OF ADIABATIC FILM COOLING EFFECTIVENESS AND HEAT TRANSFER COEFFICIENT ON A TRANSONIC SQUEALER TIP},
author={Saul AJ, Ireland PT, Coull JD, Wong TH, Li H et al.},
pages={437-448},
year = "2018"
}
THE EFFECTS OF COMBUSTOR COOLING FEATURES ON NOZZLE GUIDE VANE FILM COOLING EXPERIMENTS
Holgate NE, Ireland PT, Romero E & ASME (2018), PROCEEDINGS OF THE ASME TURBO EXPO: TURBOMACHINERY TECHNICAL CONFERENCE AND EXPOSITION, 2018, VOL 5C, 193-205
BibTeX
@inproceedings{theeffectsofcom-2018/,
title={THE EFFECTS OF COMBUSTOR COOLING FEATURES ON NOZZLE GUIDE VANE FILM COOLING EXPERIMENTS},
author={Holgate NE, Ireland PT, Romero E & ASME },
pages={193-205},
year = "2018"
}
A NOVEL EXPERIMENTAL TECHNIQUE FOR INVESTIGATING NATURAL CONVECTIVE HEAT TRANSFER IN A GAS TURBINE ANNULUS
Fahy DD, Ireland PT, Lewis LV, Raya E & ASME (2018), PROCEEDINGS OF THE ASME TURBO EXPO: TURBOMACHINERY TECHNICAL CONFERENCE AND EXPOSITION, 2018, VOL 5B
BibTeX
@inproceedings{anovelexperimen-2018/,
title={A NOVEL EXPERIMENTAL TECHNIQUE FOR INVESTIGATING NATURAL CONVECTIVE HEAT TRANSFER IN A GAS TURBINE ANNULUS},
author={Fahy DD, Ireland PT, Lewis LV, Raya E & ASME },
year = "2018"
}
Manufacture and Initial Thermo-Fluid Measurements on a Heat Sink Module for Potential Applications in a DEMO
Nicholas JR, Ireland PT, Hancock D & Robertson D (2017), FUSION SCIENCE AND TECHNOLOGY, 72(4), 566-573
Effect of active modulation of through-casing coolant injection on turbine efficiency
Tang B, Bacic M & Ireland P (2017), ASME Proceedings, 2A
Experimental and numerical investigation of annular casing impingement arrays for faster casing response
Dann A, Dhopade P, Bacic M, Ireland P & Lewis L (2017), Journal of Engineering for Gas Turbines and Power, 139(9), 092603
BibTeX
@article{experimentaland-2017/4,
title={Experimental and numerical investigation of annular casing impingement arrays for faster casing response},
author={Dann A, Dhopade P, Bacic M, Ireland P & Lewis L},
journal={Journal of Engineering for Gas Turbines and Power},
volume={139},
pages={092603},
publisher={American Society of Mechanical Engineers},
year = "2017"
}
High Resolution Experimental and Computational Methods for Modelling Multiple Row Effusion Cooling Performance
Murray A, Ireland P, Wong TH, Tang SW & Rawlinson AJ (2017), 12th European Conference on Turbomachinery Fluid Dynamics and Thermodynamics
Analysis of Underhood Temperature Fields using Linear Superposition
Lim C, Ireland P & Collett N (2017), SAE Technical Papers, 2017-March(March)
Predictionandaugmentation ofnozzle guide vane film cooling hole pressure margin
Holgate NE, Cresci I, Ireland PT & Rawlinson A (2017), 12th European Conference on Turbomachinery Fluid Dynamics and Thermodynamics, ETC 2017
BibTeX
@inproceedings{predictionandau-2017/1,
title={Predictionandaugmentation ofnozzle guide vane film cooling hole pressure margin},
author={Holgate NE, Cresci I, Ireland PT & Rawlinson A},
year = "2017"
}
Film cooling effectiveness downstream of optimised cross corrugated slot geometry with exit shaping
Wong TH, Ireland PT & Self KP (2017), 12th European Conference on Turbomachinery Fluid Dynamics and Thermodynamics, ETC 2017
BibTeX
@inproceedings{filmcoolingeffe-2017/1,
title={Film cooling effectiveness downstream of optimised cross corrugated slot geometry with exit shaping},
author={Wong TH, Ireland PT & Self KP},
year = "2017"
}
Switching dynamics of a fluid diverter valve using ultrasonic excitation for active flow control
Mair M, Bacic M & Ireland P (2017), 47th AIAA Fluid Dynamics Conference, 2017
BibTeX
@inproceedings{switchingdynami-2017/1,
title={Switching dynamics of a fluid diverter valve using ultrasonic excitation for active flow control},
author={Mair M, Bacic M & Ireland P},
year = "2017"
}
Nozzle guide vane film cooling effectiveness for radial showerheads with restricted cooling hole surface angles
Holgate NE, Ireland PT & Self KP (2017), Proceedings of the ASME Turbo Expo, 5C-2017
An integrated conjugate computational approach for evaluating the aerothermal and thermomechanical performance of doublewall effusion cooled systems
Murray AV, Ireland PT & Rawlinson AJ (2017), Proceedings of the ASME Turbo Expo, 5B-2017
Predictionandaugmentation ofnozzle guide vane film cooling hole pressure margin
Holgate NE, Cresci I, Ireland PT & Rawlinson A (2017), 12th European Conference on Turbomachinery Fluid Dynamics and Thermodynamics, ETC 2017
BibTeX
@inproceedings{predictionandau-2017/1,
title={Predictionandaugmentation ofnozzle guide vane film cooling hole pressure margin},
author={Holgate NE, Cresci I, Ireland PT & Rawlinson A},
year = "2017"
}
Film cooling effectiveness downstream of optimised cross corrugated slot geometry with exit shaping
Wong TH, Ireland PT & Self KP (2017), 12th European Conference on Turbomachinery Fluid Dynamics and Thermodynamics, ETC 2017
BibTeX
@inproceedings{filmcoolingeffe-2017/1,
title={Film cooling effectiveness downstream of optimised cross corrugated slot geometry with exit shaping},
author={Wong TH, Ireland PT & Self KP},
year = "2017"
}
Experimental and numerical investigation of the effect of compressor ogv profile on combustor exit measurements using an isothermal, non-reacting tracer
Dhopade P, Denman P, Ireland P & Ravikanti M (2017), 12th European Conference on Turbomachinery Fluid Dynamics and Thermodynamics, ETC 2017
BibTeX
@inproceedings{experimentaland-2017/1,
title={Experimental and numerical investigation of the effect of compressor ogv profile on combustor exit measurements using an isothermal, non-reacting tracer},
author={Dhopade P, Denman P, Ireland P & Ravikanti M},
year = "2017"
}
A panel method aerodynamic preprocessor for planetary entry trajectory simulations
Donaldson NL & Ireland P (2017), 21st AIAA International Space Planes and Hypersonics Technologies Conference, Hypersonics 2017
BibTeX
@inproceedings{apanelmethodaer-2017/1,
title={A panel method aerodynamic preprocessor for planetary entry trajectory simulations},
author={Donaldson NL & Ireland P},
year = "2017"
}
Prediction and augmentation of nozzle guide vane film cooling hole pressure margin
Holgate NE, Cresci I, Ireland PT & Rawlinson A (2017), 12th European Conference on Turbomachinery Fluid Dynamics and Thermodynamics, ETC 2017
BibTeX
@inproceedings{predictionandau-2017/1,
title={Prediction and augmentation of nozzle guide vane film cooling hole pressure margin},
author={Holgate NE, Cresci I, Ireland PT & Rawlinson A},
year = "2017"
}
High Resolution Experimental and Computational Methods for Modelling Multiple Row Effusion Cooling Performance
Murray AV, Ireland PT, Wong TH, Tang SW & Rawlinson AJ (2017), 12th European Conference on Turbomachinery Fluid Dynamics and Thermodynamics, ETC 2017
BibTeX
@inproceedings{highresolutione-2017/1,
title={High Resolution Experimental and Computational Methods for Modelling Multiple Row Effusion Cooling Performance},
author={Murray AV, Ireland PT, Wong TH, Tang SW & Rawlinson AJ},
year = "2017"
}
Switching dynamics of a fluid diverter valve using ultrasonic excitation for active flow control
Mair M, Bacic M & Ireland P (2017), 47th AIAA Fluid Dynamics Conference, 2017
A panel method aerodynamic preprocessor for planetary entry trajectory simulations
Donaldson NL & Ireland P (2017), 21st AIAA International Space Planes and Hypersonics Technologies Conference, Hypersonics 2017
Prediction and augmentation of nozzle guide vane film cooling hole pressure margin
Holgate NE, Cresci I, Ireland PT & Rawlinson A (2017), 12th European Conference on Turbomachinery Fluid Dynamics and Thermodynamics, ETC 2017
A DETAILED STUDY OF THE INTERACTION BETWEEN TWO ROWS OF COOLING HOLES
Jiang Y, Capone L, Ireland P, Romero E & ASME (2017), PROCEEDINGS OF THE ASME TURBO EXPO: TURBINE TECHNICAL CONFERENCE AND EXPOSITION, 2017, VOL 5A
BibTeX
@inproceedings{adetailedstudyo-2017/,
title={A DETAILED STUDY OF THE INTERACTION BETWEEN TWO ROWS OF COOLING HOLES},
author={Jiang Y, Capone L, Ireland P, Romero E & ASME },
year = "2017"
}
Film Cooling Effectiveness Downstream of Trailing Edge Slots Including Cutback Surface Protuberances dagger
Wong TH, Ireland PT & Self KP (2016), INTERNATIONAL JOURNAL OF TURBOMACHINERY PROPULSION AND POWER, 1(1)
BibTeX
@article{filmcoolingeffe-2016/12,
title={Film Cooling Effectiveness Downstream of Trailing Edge Slots Including Cutback Surface Protuberances dagger},
author={Wong TH, Ireland PT & Self KP},
journal={INTERNATIONAL JOURNAL OF TURBOMACHINERY PROPULSION AND POWER},
volume={1},
number={ARTN 4},
year = "2016"
}
Experimental and Numerical Investigation of Annular Casing Impingement Arrays for Faster Casing Response
Dann A, Dhopade P, Bacic M, Ireland P & Lewis L (2016), ASME Turbo Expo 2016, 5C: Heat Transfer, V05CT18A009
Optimisation of a 180 degrees U-shaped bend shape for a turbine blade cooling passage leading to a pressure loss coefficient of approximately 0.6
Namgoong H, Ireland P & Son C (2016), PROCEEDINGS OF THE INSTITUTION OF MECHANICAL ENGINEERS PART G-JOURNAL OF AEROSPACE ENGINEERING, 230(8), 1371-1384
BibTeX
@article{optimisationofa-2016/6,
title={Optimisation of a 180 degrees U-shaped bend shape for a turbine blade cooling passage leading to a pressure loss coefficient of approximately 0.6},
author={Namgoong H, Ireland P & Son C},
journal={PROCEEDINGS OF THE INSTITUTION OF MECHANICAL ENGINEERS PART G-JOURNAL OF AEROSPACE ENGINEERING},
volume={230},
pages={1371-1384},
year = "2016"
}
Computational study of the effect of inlet velocity profile and rib orientation on heat transfer in rotating ribbed radial turbine cooling passages
Pearce R, Ireland P, McGilvray M & Romero E (2016), Proceedings of the ASME Turbo Expo 2016: Turbomachinery Technical Conference and Exposition, 5B-2016: Heat Transfer
Plasma-fluidic no moving parts valve: Experiments and numerical studies
Chen LW, Turner J, Bacic M & Ireland P (2016), 8th AIAA Flow Control Conference
BibTeX
@inproceedings{plasmafluidicno-2016/1,
title={Plasma-fluidic no moving parts valve: Experiments and numerical studies},
author={Chen LW, Turner J, Bacic M & Ireland P},
year = "2016"
}
Experimental and numerical study of a piezo driven fluid diverter for active flow control
Mair M, Chen LW, Turner J, Bacic M & Ireland P (2016), 52nd AIAA/SAE/ASEE Joint Propulsion Conference, 2016
BibTeX
@inproceedings{experimentaland-2016/1,
title={Experimental and numerical study of a piezo driven fluid diverter for active flow control},
author={Mair M, Chen LW, Turner J, Bacic M & Ireland P},
year = "2016"
}
FILM COOLING EFFECTIVENESS MEASUREMENTS ON TRAILING EDGE CUTBACK SURFACE AND LANDS FOLLOWING NOVEL CROSS CORRUGATED SLOT GEOMETRY
Wong TH, Ireland PT, Self KP & ASME (2016), PROCEEDINGS OF THE ASME TURBO EXPO: TURBINE TECHNICAL CONFERENCE AND EXPOSITION, 2016, VOL 5C
BibTeX
@inproceedings{filmcoolingeffe-2016/,
title={FILM COOLING EFFECTIVENESS MEASUREMENTS ON TRAILING EDGE CUTBACK SURFACE AND LANDS FOLLOWING NOVEL CROSS CORRUGATED SLOT GEOMETRY},
author={Wong TH, Ireland PT, Self KP & ASME },
year = "2016"
}
STUDY OF FILM COOLING IN THE TRAILING EDGE REGION OF A TURBINE ROTOR BLADE IN HIGH SPEED FLOW USING PRESSURE SENSITIVE PAINT
Gurram N, Ireland PT, Wong TH, Self KP & ASME (2016), PROCEEDINGS OF THE ASME TURBO EXPO: TURBINE TECHNICAL CONFERENCE AND EXPOSITION, 2016, VOL 5C
BibTeX
@inproceedings{studyoffilmcool-2016/,
title={STUDY OF FILM COOLING IN THE TRAILING EDGE REGION OF A TURBINE ROTOR BLADE IN HIGH SPEED FLOW USING PRESSURE SENSITIVE PAINT},
author={Gurram N, Ireland PT, Wong TH, Self KP & ASME },
year = "2016"
}
KALMAN FILTER DEVELOPMENT FOR REAL TIME PROPER ORTHOGONAL DECOMPOSITION DISC TEMPERATURE MODEL
van Paridon A, Bacic M, Ireland PT & ASME (2016), PROCEEDINGS OF THE ASME TURBO EXPO: TURBINE TECHNICAL CONFERENCE AND EXPOSITION, 2016, VOL 6
BibTeX
@inproceedings{kalmanfilterdev-2016/,
title={KALMAN FILTER DEVELOPMENT FOR REAL TIME PROPER ORTHOGONAL DECOMPOSITION DISC TEMPERATURE MODEL},
author={van Paridon A, Bacic M, Ireland PT & ASME },
year = "2016"
}
Development of a high-heat flux cooling element with potential application in a near-term fusion power plant divertor
Nicholas JR, Ireland P, Hancock D & Robertson D (2015), FUSION ENGINEERING AND DESIGN, 96-97, 136-141
BibTeX
@article{developmentofah-2015/10,
title={Development of a high-heat flux cooling element with potential application in a near-term fusion power plant divertor},
author={Nicholas JR, Ireland P, Hancock D & Robertson D},
journal={FUSION ENGINEERING AND DESIGN},
volume={96-97},
pages={136-141},
year = "2015"
}
Numerical modelling techniques for turbine blade internal cooling passages
Dhopade P, Capone L, McGilvray M, Gillespie D & Ireland P (2015), Proceedings of ASME Turbo Expo 2015: Turbine Technical Conference and Exposition, 5A, 1-11
Design and development of a full-scale generic transient heat transfer facility (THTF) for air system validation
van Paridon A, Dann A, Ireland P & Bacic M (2015), Turbo Expo: Turbomachinery Technical Conference and Exposition (GT), 5B, 1-13
Computational and experimental study of heat transfer in rotating ribbed radial turbine cooling passages
Pearce R, Ireland P, He L, McGilvray M & Romero E (2015), Proceedings of ASME Turbo Expo 2015: Turbine Technical Conference and Exposition, 5A, 1-11
The Oxford High Density Tunnel
McGilvray M, Doherty L, Neely AJ, Ireland PT & Pearce R (2015), Proceedings of the 8th European Symposium on Aerothermodynamics for Space Vehicles
BibTeX
@inproceedings{theoxfordhighde-2015/6,
title={The Oxford High Density Tunnel},
author={McGilvray M, Doherty L, Neely AJ, Ireland PT & Pearce R},
year = "2015"
}
The oxford high density tunnel
McGilvray MATTHEW, Doherty LJ, Neely AJ, Ireland PETER & Pearce R (2015), 20th AIAA International Space Planes and Hypersonic Systems and Technologies Conference, 2015
BibTeX
@inproceedings{theoxfordhighde-2015/1,
title={The oxford high density tunnel},
author={McGilvray MATTHEW, Doherty LJ, Neely AJ, Ireland PETER & Pearce R},
year = "2015"
}
Film cooling effectiveness measurements on engine representative trailing edge slots including cutback surface protuberances
Wong TH, Ireland PT & Self KP (2015), 11th European Conference on Turbomachinery Fluid Dynamics and Thermodynamics, ETC 2015
BibTeX
@inproceedings{filmcoolingeffe-2015/1,
title={Film cooling effectiveness measurements on engine representative trailing edge slots including cutback surface protuberances},
author={Wong TH, Ireland PT & Self KP},
year = "2015"
}
Realistic velocity and turbulence intensity profiles at the combustor-turbine interaction (CTI) plane in a nozzle guide vane test facility
Cresci I, Ireland PT, Bacic M, Tibbott I & Rawlinson A (2015), 11th European Conference on Turbomachinery Fluid Dynamics and Thermodynamics, ETC 2015
BibTeX
@inproceedings{realisticveloci-2015/1,
title={Realistic velocity and turbulence intensity profiles at the combustor-turbine interaction (CTI) plane in a nozzle guide vane test facility},
author={Cresci I, Ireland PT, Bacic M, Tibbott I & Rawlinson A},
year = "2015"
}
Realistic velocity and turbulence intensity profiles at the combustor-turbine interaction (CTI) plane in a nozzle guide vane test facility
Cresci I, Ireland PT, Bacic M, Tibbott I & Rawlinson A (2015), 11th European Conference on Turbomachinery Fluid Dynamics and Thermodynamics, ETC 2015
BibTeX
@inproceedings{realisticveloci-2015/1,
title={Realistic velocity and turbulence intensity profiles at the combustor-turbine interaction (CTI) plane in a nozzle guide vane test facility},
author={Cresci I, Ireland PT, Bacic M, Tibbott I & Rawlinson A},
year = "2015"
}
Film cooling effectiveness measurements on engine representative trailing edge slots including cutback surface protuberances
Wong TH, Ireland PT & Self KP (2015), 11th European Conference on Turbomachinery Fluid Dynamics and Thermodynamics, ETC 2015
BibTeX
@inproceedings{filmcoolingeffe-2015/1,
title={Film cooling effectiveness measurements on engine representative trailing edge slots including cutback surface protuberances},
author={Wong TH, Ireland PT & Self KP},
year = "2015"
}
FILM COOLING EFFECTIVENESS MEASUREMENTS ON ENGINE REPRESENTATIVE TRAILING EDGE SLOTS INCLUDING CUTBACK SURFACE PROTUBERANCES
Wong TH, Ireland PT & Self KP (2015), 11TH EUROPEAN CONFERENCE ON TURBOMACHINERY: FLUID DYNAMICS AND THERMODYNAMICS
BibTeX
@inproceedings{filmcoolingeffe-2015/,
title={FILM COOLING EFFECTIVENESS MEASUREMENTS ON ENGINE REPRESENTATIVE TRAILING EDGE SLOTS INCLUDING CUTBACK SURFACE PROTUBERANCES},
author={Wong TH, Ireland PT & Self KP},
year = "2015"
}
REALISTIC VELOCITY AND TURBULENCE INTENSITY PROFILES AT THE COMBUSTOR-TURBINE INTERACTION (CTI) PLANE IN A NOZZLE GUIDE VANE TEST FACILITY
Cresci I, Ireland PT, Bacic M, Tibbott I & Rawlinson A (2015), 11TH EUROPEAN CONFERENCE ON TURBOMACHINERY: FLUID DYNAMICS AND THERMODYNAMICS
BibTeX
@inproceedings{realisticveloci-2015/,
title={REALISTIC VELOCITY AND TURBULENCE INTENSITY PROFILES AT THE COMBUSTOR-TURBINE INTERACTION (CTI) PLANE IN A NOZZLE GUIDE VANE TEST FACILITY},
author={Cresci I, Ireland PT, Bacic M, Tibbott I & Rawlinson A},
year = "2015"
}
DISC TEMPERATURE MODELLING USING REDUCED ORDER PROPER ORTHOGONAL DECOMPOSITION MODELS
van Paridon A, Bacic M, Ireland PT, Daniel R & ASME (2015), PROCEEDINGS OF THE ASME TURBO EXPO: TURBINE TECHNICAL CONFERENCE AND EXPOSITION, 2015, VOL 6
BibTeX
@inproceedings{disctemperature-2015/,
title={DISC TEMPERATURE MODELLING USING REDUCED ORDER PROPER ORTHOGONAL DECOMPOSITION MODELS},
author={van Paridon A, Bacic M, Ireland PT, Daniel R & ASME },
year = "2015"
}
VELOCITY AND TURBULENCE INTENSITY PROFILES DOWNSTREAM OF A LONG REACH ENDWALL DOUBLE ROW OF FILM COOLING HOLES IN A GAS TURBINE COMBUSTOR REPRESENTATIVE ENVIRONMENT
Cresci I, Ireland PT, Bacic M, Tibbott I, Rawlinson A et al. (2015), ASME TURBO EXPO: TURBINE TECHNICAL CONFERENCE AND EXPOSITION, 2015, VOL 2B
BibTeX
@inproceedings{velocityandturb-2015/,
title={VELOCITY AND TURBULENCE INTENSITY PROFILES DOWNSTREAM OF A LONG REACH ENDWALL DOUBLE ROW OF FILM COOLING HOLES IN A GAS TURBINE COMBUSTOR REPRESENTATIVE ENVIRONMENT},
author={Cresci I, Ireland PT, Bacic M, Tibbott I, Rawlinson A et al.},
year = "2015"
}
Battery internal temperature estimation by combined impedance and surface temperature measurement
Richardson RR, Ireland PT, Howey DA, Richardson RR, Ireland PT et al. (2014), Journal of Power Sources, 265, 254-261
BibTeX
@article{batteryinternal-2014/11,
title={Battery internal temperature estimation by combined impedance and surface temperature measurement},
author={Richardson RR, Ireland PT, Howey DA, Richardson RR, Ireland PT et al.},
journal={Journal of Power Sources},
volume={265},
pages={254-261},
publisher={Elsevier},
year = "2014"
}
Thermal-fluid-structural analysis of the Oxford High Density Tunnel
Neely AJ, McGilvray M, Calder-Smith T & Ireland P (2014), Proceedings of the 19th Australasian Fluid Mechanics Conference
BibTeX
@inproceedings{thermalfluidstr-2014/1,
title={Thermal-fluid-structural analysis of the Oxford High Density Tunnel},
author={Neely AJ, McGilvray M, Calder-Smith T & Ireland P},
year = "2014"
}
Towards the generalisation of thermal flux data for the improvement of atmospheric entry and spacecraft deorbiting simulations
Donaldson N, Ireland P & Merrifield J (2014), Proceedings of the International Astronautical Congress, IAC, 2, 1437-1449
BibTeX
@inproceedings{towardsthegener-2014/1,
title={Towards the generalisation of thermal flux data for the improvement of atmospheric entry and spacecraft deorbiting simulations},
author={Donaldson N, Ireland P & Merrifield J},
pages={1437-1449},
year = "2014"
}
INNOVATIVE MEASUREMENT TECHNIQUES FOR A COOLED TURBINE CASING OPERATING AT ENGINE REPRESENTATIVE THERMAL CONDITIONS
Dann AG, Thorpe SJ, Lewis LV, Ireland P & ASME (2014), PROCEEDINGS OF THE ASME TURBO EXPO: TURBINE TECHNICAL CONFERENCE AND EXPOSITION, 2014, VOL 5B
BibTeX
@inproceedings{innovativemeasu-2014/,
title={INNOVATIVE MEASUREMENT TECHNIQUES FOR A COOLED TURBINE CASING OPERATING AT ENGINE REPRESENTATIVE THERMAL CONDITIONS},
author={Dann AG, Thorpe SJ, Lewis LV, Ireland P & ASME },
year = "2014"
}
REDUCED ORDER TRANSIENT DISC TEMPERATURE MODELS FOR ONLINE HEALTH MONITORING
van Paridon A, Bacic M, Ireland PT, Barnes C, Lewis LV et al. (2014), PROCEEDINGS OF THE ASME TURBO EXPO: TURBINE TECHNICAL CONFERENCE AND EXPOSITION, 2014, VOL 6
BibTeX
@inproceedings{reducedordertra-2014/,
title={REDUCED ORDER TRANSIENT DISC TEMPERATURE MODELS FOR ONLINE HEALTH MONITORING},
author={van Paridon A, Bacic M, Ireland PT, Barnes C, Lewis LV et al.},
year = "2014"
}
Influence of Film Cooling Hole Angles and Geometries on Aerodynamic Loss and Net Heat Flux Reduction
Lim CH, Pullan G & Ireland P (2013), Journal of Turbomachinery, 135(5)
A simple method to generate hierarchical nanoscale structures on microwrinkles for hydrophobic applications
Kim S-J, Park H-J, Lee J-C, Park S, Ireland P et al. (2013), MATERIALS LETTERS, 105, 50-53
Application of pressure-sensitive paint to low-speed flow around a U-bend of strong curvature
Quinn MK, Gongora-Orozco N, Kontis K & Ireland P (2013), Experimental Thermal and Fluid Science, 48, 58-66
Generation of periodic surface wrinkles using a single layer resin by a repetitive dividing volume (RDV) technique
Park SH, Park HJ, Kim SJ & Ireland P (2013), Microelectronic Engineering, 106, 13-20
A robust radial traverse temperature probe for application to a gas turbine HP/IP stage
Wilson AJW, Ireland PT, Stevenson R, Thorpe SJ & Martin D (2012), Proceedings of the ASME Turbo Expo, 1, 63-71
Experimental and Numerical Investigation of Combuster-Turbine Interaction using an Isothermal, non reacting tracer
Chong MC, Sunkook H, Ireland PT, Denman P & Savarianandam V (2012), Journal of Engineering for Gas Turbines and Power: Transactions of the ASME
BibTeX
@article{experimentaland-2012/6,
title={Experimental and Numerical Investigation of Combuster-Turbine Interaction using an Isothermal, non reacting tracer},
author={Chong MC, Sunkook H, Ireland PT, Denman P & Savarianandam V},
journal={Journal of Engineering for Gas Turbines and Power: Transactions of the ASME},
number={081501},
year = "2012"
}
Blade tip heat transfer and aerodynamics in a large scale turbine cascade with moving endwall
Palafox P, Oldfield MLG, Ireland PT, Jones TV & LaGraff JE (2011), Journal of Turbomachinery, 134(2)
Detailed heat transfer measurements in a model of an integrally cast cooling passage
Ieronymidis I, Gillespie DRH, Ireland PT & Kingston R (2010), Journal of Turbomachinery, 132(2)
Enhancement of impingement cooling in a high cross flow channel using shaped impingement cooling holes
Chambers AC, Gillespie DRH, Ireland PT & Kingston R (2010), Journal of Turbomachinery, 132(2)
Heat Transfer and Flow Testing in Engine HP Turbine Cooling System Development
Ireland PT, Mittal V & jackson D (2010), Heat Transfer Research, 41(8), 829-847
Enhancement of Impingement Cooling in a High Cross Flow Channel using Shaped Impingement Cooling Holes
Gillespie DRH, Chambers AC, Ireland PT & Mitchell M (2009), ASME Journal of Turbomachinery, 132(2)
BibTeX
@article{enhancementofim-2009/12,
title={Enhancement of Impingement Cooling in a High Cross Flow Channel using Shaped Impingement Cooling Holes},
author={Gillespie DRH, Chambers AC, Ireland PT & Mitchell M},
journal={ASME Journal of Turbomachinery},
volume={132},
number={21002},
year = "2009"
}
Combined experimental and CFD study of a HP blade multi- pass cooling system
Jackson D, Ireland P & Cheong B (2009), Proceedings of the ASME Turbo Expo, 3(PART B), 851-862
Characteristics of an underexpanded jet and its surface impingement for combustion burnthrough
Hussain ZM, Coney MH, Moss JB, Ireland PT & Jagger S (2009), Proceedings of the ASME Turbo Expo, 3(PART A), 91-100
Efficiency of an unshrouded transonic hp turbine: An experimental and computational study
Beard PF, Povey T, Smith A & Ireland PT (2009), 8th European Conference on Turbomachinery: Fluid Dynamics and Thermodynamics, ETC 2009 - Conference Proceedings, 1435-1448
BibTeX
@inproceedings{efficiencyofanu-2009/1,
title={Efficiency of an unshrouded transonic hp turbine: An experimental and computational study},
author={Beard PF, Povey T, Smith A & Ireland PT},
pages={1435-1448},
year = "2009"
}
U-bend shaped turbine blade cooling passage optimization
Namgoong H, Son C & Ireland P (2008), 12th AIAA/ISSMO Multidisciplinary Analysis and Optimization Conference, MAO
BibTeX
@article{ubendshapedturb-2008/12,
title={U-bend shaped turbine blade cooling passage optimization},
author={Namgoong H, Son C & Ireland P},
journal={12th AIAA/ISSMO Multidisciplinary Analysis and Optimization Conference, MAO},
year = "2008"
}
Mass flow rate measurement in a transonic turbine test facility with temperature distortion and swirl
Beard PF, Povey T & Ireland PT (2008), Flow Measurement and Instrumentation, 19(5), 315-324
Heat Transfer and Flow Investigation of a Multi-spoke Flameholder for an Annular Combuster
Goodman JS & Ireland PT (2008), Flow Turbulence and Combustion, 81, 261-278
BibTeX
@article{heattransferand-2008/,
title={Heat Transfer and Flow Investigation of a Multi-spoke Flameholder for an Annular Combuster},
author={Goodman JS & Ireland PT},
journal={Flow Turbulence and Combustion},
volume={81},
pages={261-278},
year = "2008"
}
Compact inverter designed for high-temperature operation
Buttay C, Rashid J, Mark Johnson C, Udrea F, Amaratunga G et al. (2007), PESC Record - IEEE Annual Power Electronics Specialists Conference, 2241-2247
Compact double-side liquid-impingement-cooled integrated power electronic module
Johnson CM, Buttay C, Rashid SJ, Udrea F, Amaratunga GAJ et al. (2007), Proceedings of the International Symposium on Power Semiconductor Devices and ICs, 53-56
BibTeX
@article{compactdoublesi-2007/12,
title={Compact double-side liquid-impingement-cooled integrated power electronic module},
author={Johnson CM, Buttay C, Rashid SJ, Udrea F, Amaratunga GAJ et al.},
journal={Proceedings of the International Symposium on Power Semiconductor Devices and ICs},
pages={53-56},
year = "2007"
}
High performance cooling system for automotive inverters
Buttay C, Rashid J, Johnson CM, Ireland P, Udrea F et al. (2007), 2007 European Conference on Power Electronics and Applications, EPE
An experimental and computational parametric investigation of flow conditions in intersecting circular passages
Nowlin SR, Gillespie DRH, Ireland PT, Romero E & Mitchell M (2007), Proceedings of the ASME Turbo Expo, 4 PART B, 849-859
Thermal modeling for the sustained hypersonic flight experiment
Goodman JS & Ireland PT (2007), Journal of Thermophysics and Heat Transfer, 21(4), 780-789
High temperature direct double side cooled inverter module for hybrid electric vehicle application
Buttay C, Johnson CM, Rashid J, Udrea F, Amaratunga GAJ et al. (2007), Materials Science Forum, 556-557, 709-712
BibTeX
@article{hightemperature-2007/1,
title={High temperature direct double side cooled inverter module for hybrid electric vehicle application},
author={Buttay C, Johnson CM, Rashid J, Udrea F, Amaratunga GAJ et al.},
journal={Materials Science Forum},
volume={556-557},
pages={709-712},
year = "2007"
}
High temperature direct double side cooled inverter module for hybrid electric vehicle application
Buttay C, Johnson CM, Rashid J, Udrea F, Amaratunga GAJ et al. (2007), Materials Science Forum, 556-557, 709-712
The use of high blockage ribs to enhance heat transfer coefficient distributions in a model of an integrally cast cooling manifold
Ieronymidis I, Gillespie DRH, Ireland PT & Kingston R (2006), Proceedings of the ASME Turbo Expo, 3 PART B, 1027-1039
Experimental and computational flow field studies of an integrally cast cooling manifold with and without rotation
Ieronymidis I, Gillespie DRH, Ireland PT & Kingston R (2006), Proceedings of the ASME Turbo Expo, 3 PART B, 1041-1053
Detailed heat transfer measurements in a model of an integrally cast cooling passage
Ieronymidis I, Gillespie DRH, Ireland PT & Kingston R (2006), Proceedings of the ASME Turbo Expo, 3 PART B, 1015-1026
Enhancement of impingement cooling in a high cross flow channel using shaped impingement cooling holes
Chambers AC, Gillespie DRH, Ireland PT & Mitchell M (2006), Proceedings of the ASME Turbo Expo, 3 PART B, 995-1004
Measurement of heat transfer coefficient distributions and flow field in a model of a turbine blade cooling passage with tangential injection
Ling JPCW, Ireland PT & Harvey NW (2006), Proceedings of the ASME Turbo Expo, 3 PART A, 325-340
BibTeX
@article{measurementofhe-2006/11,
title={Measurement of heat transfer coefficient distributions and flow field in a model of a turbine blade cooling passage with tangential injection},
author={Ling JPCW, Ireland PT & Harvey NW},
journal={Proceedings of the ASME Turbo Expo},
volume={3 PART A},
pages={325-340},
year = "2006"
}
Comparative study between a cut-back and conventional trailing edge film cooling system
Telisinghe JC, Ireland PT, Jones TV, Barrett D & Changmin S (2006), Proceedings of the ASME Turbo Expo, 3 PART B, 983-993
BibTeX
@article{comparativestud-2006/11,
title={Comparative study between a cut-back and conventional trailing edge film cooling system},
author={Telisinghe JC, Ireland PT, Jones TV, Barrett D & Changmin S},
journal={Proceedings of the ASME Turbo Expo},
volume={3 PART B},
pages={983-993},
year = "2006"
}
Blade tip heat transfer and aerodynamics in a large scale turbine cascade with moving endwall
Palafox P, Oldfield MLG, Ireland PT, Jones TV & Lagraff JE (2006), Proceedings of the ASME Turbo Expo, 3 PART A, 469-482
BibTeX
@article{bladetipheattra-2006/11,
title={Blade tip heat transfer and aerodynamics in a large scale turbine cascade with moving endwall},
author={Palafox P, Oldfield MLG, Ireland PT, Jones TV & Lagraff JE},
journal={Proceedings of the ASME Turbo Expo},
volume={3 PART A},
pages={469-482},
year = "2006"
}
Thermal modelling for the sustained hypersonic flight experiment
Goodman JS & Ireland PT (2006), A Collection of Technical Papers - 14th AIAA/AHI International Space Planes and Hypersonic Systems and Technologies Conference, 2, 1670-1684
BibTeX
@article{thermalmodellin-2006/1,
title={Thermal modelling for the sustained hypersonic flight experiment},
author={Goodman JS & Ireland PT},
journal={A Collection of Technical Papers - 14th AIAA/AHI International Space Planes and Hypersonic Systems and Technologies Conference},
volume={2},
pages={1670-1684},
year = "2006"
}
A transient calorimeter technique for determining regional heat transfer coefficients in the three-temperature flowfield at a turbine airfoil leading edge
Nowlin SR, Gillespie DRH, Ireland PT, Knoche R & Kingston TR (2005), Proceedings of the ASME Turbo Expo, 3 PART A, 729-738
BibTeX
@inproceedings{atransientcalor-2005/11,
title={A transient calorimeter technique for determining regional heat transfer coefficients in the three-temperature flowfield at a turbine airfoil leading edge},
author={Nowlin SR, Gillespie DRH, Ireland PT, Knoche R & Kingston TR},
pages={729-738},
year = "2005"
}
Flow and heat transfer characteristics of an impinging jet in crossflow at low nozzle-to-plate spacings
Cheong BCY, Ireland PT, Ling JPCW & Ashforth-Frost S (2005), Proceedings of the ASME Turbo Expo, 3 PART A, 601-617
BibTeX
@article{flowandheattran-2005/11,
title={Flow and heat transfer characteristics of an impinging jet in crossflow at low nozzle-to-plate spacings},
author={Cheong BCY, Ireland PT, Ling JPCW & Ashforth-Frost S},
journal={Proceedings of the ASME Turbo Expo},
volume={3 PART A},
pages={601-617},
year = "2005"
}
An investigation of the application of roughness elements to enhance heat transfer in an impingement cooling system
Son C, Dailey G, Ireland P & Gillespie D (2005), Proceedings of the ASME Turbo Expo, 3 PART A, 465-479
BibTeX
@article{aninvestigation-2005/11,
title={An investigation of the application of roughness elements to enhance heat transfer in an impingement cooling system},
author={Son C, Dailey G, Ireland P & Gillespie D},
journal={Proceedings of the ASME Turbo Expo},
volume={3 PART A},
pages={465-479},
year = "2005"
}
The effect of roughness element fillet radii on the heat transfer enhancement in an impingement cooling system
Son C, Ireland P & Gillespie D (2005), Proceedings of the ASME Turbo Expo, 3 PART A, 263-273
The effect of initial cross flow on the cooling performance of a narrow impingement channel
Chambers AC, Gillespie DRH, Ireland PT & Dailey GM (2005), Journal of Heat Transfer, 127(4), 358-365
Detailed investigation of heat flux measurements made in a standard propane-air fire-certification burner compared to levels derived from a low-temperature analog burner
Abu Talib R, Neely AJ, Ireland PT & Mullender AJ (2005), Journal of Engineering for Gas Turbines and Power, 127(2), 249-256
BibTeX
@article{detailedinvesti-2005/4,
title={Detailed investigation of heat flux measurements made in a standard propane-air fire-certification burner compared to levels derived from a low-temperature analog burner},
author={Abu Talib R, Neely AJ, Ireland PT & Mullender AJ},
journal={Journal of Engineering for Gas Turbines and Power},
volume={127},
pages={249-256},
year = "2005"
}
High performance single-phase liquid coolers for power electronics
Cheong BCY, Ireland PT & Siebert AW (2005), Proceedings of the 3rd International Conference on Microchannels and Minichannels, 2005, PART B, 199-207
BibTeX
@article{highperformance-2005/1,
title={High performance single-phase liquid coolers for power electronics},
author={Cheong BCY, Ireland PT & Siebert AW},
journal={Proceedings of the 3rd International Conference on Microchannels and Minichannels, 2005},
volume={PART B},
pages={199-207},
year = "2005"
}
Flow measurements inside a large scale model of turbine component internal cooling passage
Tsang C, Gillespie D & Ireland P (2005), ETC 2005 - 6th Conference on Turbomachinery: Fluid Dynamics and Thermodynamics
BibTeX
@inproceedings{flowmeasurement-2005/1,
title={Flow measurements inside a large scale model of turbine component internal cooling passage},
author={Tsang C, Gillespie D & Ireland P},
year = "2005"
}
A novel liquid crystal image processing technique using multiple gas temperature steps to determine heat transfer coefficient distribution and adiabatic wall temperature
Talib ARA, Neely AJ, Ireland PT & Mullender AAJ (2004), Journal of Turbomachinery, 126(4), 587-596
BibTeX
@article{anovelliquidcry-2004/10,
title={A novel liquid crystal image processing technique using multiple gas temperature steps to determine heat transfer coefficient distribution and adiabatic wall temperature},
author={Talib ARA, Neely AJ, Ireland PT & Mullender AAJ},
journal={Journal of Turbomachinery},
volume={126},
pages={587-596},
year = "2004"
}
A technique for processing transient heat transfer, liquid crystal experiments in the presence of lateral conduction
Ling JPCW, Ireland PT & Turner L (2004), Journal of Turbomachinery, 126(2), 247-258
A novel liquid crystal image processing technique using multiple gas temperature steps to determine heat transfer coefficient distribution and adiabatic wall temperature
Abu Talib AR, Neely AJ, Ireland PT & Mullender AJ (2003), American Society of Mechanical Engineers, International Gas Turbine Institute, Turbo Expo (Publication) IGTI, 5 A, 123-131
BibTeX
@article{anovelliquidcry-2003/12,
title={A novel liquid crystal image processing technique using multiple gas temperature steps to determine heat transfer coefficient distribution and adiabatic wall temperature},
author={Abu Talib AR, Neely AJ, Ireland PT & Mullender AJ},
journal={American Society of Mechanical Engineers, International Gas Turbine Institute, Turbo Expo (Publication) IGTI},
volume={5 A},
pages={123-131},
year = "2003"
}
A detailed experimental investigation of a perforated heat transfer surface applied to gas turbine recuperators
Adams JC, Ireland PT & Oswald J (2003), American Society of Mechanical Engineers, International Gas Turbine Institute, Turbo Expo (Publication) IGTI, 5 B, 1071-1080
BibTeX
@article{adetailedexperi-2003/12,
title={A detailed experimental investigation of a perforated heat transfer surface applied to gas turbine recuperators},
author={Adams JC, Ireland PT & Oswald J},
journal={American Society of Mechanical Engineers, International Gas Turbine Institute, Turbo Expo (Publication) IGTI},
volume={5 B},
pages={1071-1080},
year = "2003"
}
A technique for processing transient heat transfer, liquid crystal experiments in the presence of lateral conduction
Ling JPCW, Ireland PT & Turner L (2003), American Society of Mechanical Engineers, International Gas Turbine Institute, Turbo Expo (Publication) IGTI, 5 A, 297-310
BibTeX
@article{atechniqueforpr-2003/12,
title={A technique for processing transient heat transfer, liquid crystal experiments in the presence of lateral conduction},
author={Ling JPCW, Ireland PT & Turner L},
journal={American Society of Mechanical Engineers, International Gas Turbine Institute, Turbo Expo (Publication) IGTI},
volume={5 A},
pages={297-310},
year = "2003"
}
A comparison between experimental and predicted flow profiles beneath a semi-confined axisymmetric impinging jet
Cheong CY, Ireland PT & Ashforth-Frost S (2003), American Society of Mechanical Engineers, International Gas Turbine Institute, Turbo Expo (Publication) IGTI, 5 A, 311-316
BibTeX
@article{acomparisonbetw-2003/12,
title={A comparison between experimental and predicted flow profiles beneath a semi-confined axisymmetric impinging jet},
author={Cheong CY, Ireland PT & Ashforth-Frost S},
journal={American Society of Mechanical Engineers, International Gas Turbine Institute, Turbo Expo (Publication) IGTI},
volume={5 A},
pages={311-316},
year = "2003"
}
Detailed investigation of heat flux measurements made in a standard propane-air fire-certification burner compared to levels derived from a low-temperature analogue burner
Abu Talib AR, Ireland PT, Neely AJ & Mullender AJ (2003), American Society of Mechanical Engineers, International Gas Turbine Institute, Turbo Expo (Publication) IGTI, 1, 169-177
BibTeX
@article{detailedinvesti-2003/12,
title={Detailed investigation of heat flux measurements made in a standard propane-air fire-certification burner compared to levels derived from a low-temperature analogue burner},
author={Abu Talib AR, Ireland PT, Neely AJ & Mullender AJ},
journal={American Society of Mechanical Engineers, International Gas Turbine Institute, Turbo Expo (Publication) IGTI},
volume={1},
pages={169-177},
year = "2003"
}
A novel transient liquid crystal technique to determine heat transfer coefficient distributions and adiabatic wall temperature in a three-temperature problem
Chambers AC, Gillespie DRH, Ireland PT & Dailey GM (2003), Journal of Turbomachinery, 125(3), 538-546
BibTeX
@inproceedings{anoveltransient-2003/7,
title={A novel transient liquid crystal technique to determine heat transfer coefficient distributions and adiabatic wall temperature in a three-temperature problem},
author={Chambers AC, Gillespie DRH, Ireland PT & Dailey GM},
pages={538-546},
year = "2003"
}
Cooling performance of a narrow impingement channel including the introduction of cross flow upstream of the first hole
Chambers AC, Gillespie DRH, Ireland PT & Dailey GM (2003), American Society of Mechanical Engineers, Heat Transfer Division, (Publication) HTD, 374(2), 131-142
BibTeX
@article{coolingperforma-2003/1,
title={Cooling performance of a narrow impingement channel including the introduction of cross flow upstream of the first hole},
author={Chambers AC, Gillespie DRH, Ireland PT & Dailey GM},
journal={American Society of Mechanical Engineers, Heat Transfer Division, (Publication) HTD},
volume={374},
pages={131-142},
year = "2003"
}
Full coverage film cooling for combustor transition sections
Ling JPCW, Ireland PT & Turner L (2002), American Society of Mechanical Engineers, International Gas Turbine Institute, Turbo Expo (Publication) IGTI, 3 B, 1011-1021
BibTeX
@article{fullcoveragefil-2002/12,
title={Full coverage film cooling for combustor transition sections},
author={Ling JPCW, Ireland PT & Turner L},
journal={American Society of Mechanical Engineers, International Gas Turbine Institute, Turbo Expo (Publication) IGTI},
volume={3 B},
pages={1011-1021},
year = "2002"
}
A novel transient liquid crystal technique to determine heat transfer coefficient distributions and adiabatic wall temperature in a three temperature problem
Chambers AC, Gillespie DRH, Ireland PT & Dailey GM (2002), American Society of Mechanical Engineers, International Gas Turbine Institute, Turbo Expo (Publication) IGTI, 3 B, 1033-1041
BibTeX
@article{anoveltransient-2002/12,
title={A novel transient liquid crystal technique to determine heat transfer coefficient distributions and adiabatic wall temperature in a three temperature problem},
author={Chambers AC, Gillespie DRH, Ireland PT & Dailey GM},
journal={American Society of Mechanical Engineers, International Gas Turbine Institute, Turbo Expo (Publication) IGTI},
volume={3 B},
pages={1033-1041},
year = "2002"
}
Photographs on the effect of perforations on the heat transfer due to laminar flow over an extended surface
Cerza M, Adams JC, Ireland PT & Oswald J (2002), JOURNAL OF HEAT TRANSFER-TRANSACTIONS OF THE ASME, 124(4), 595-595
Techniques for detailed heat transfer measurements in cold supersonic blowdown tunnels using thermochromic liquid crystals
Mee DJ, Chiu HS & Ireland PT (2002), International Journal of Heat and Mass Transfer, 45(16), 3287-3297
BibTeX
@article{techniquesforde-2002/5,
title={Techniques for detailed heat transfer measurements in cold supersonic blowdown tunnels using thermochromic liquid crystals},
author={Mee DJ, Chiu HS & Ireland PT},
journal={International Journal of Heat and Mass Transfer},
volume={45},
pages={3287-3297},
year = "2002"
}
Heat transfer and flow characteristics of an engine representative impingement cooling system
Son C, Gillespie D, Ireland P & Dailey GM (2001), Journal of Turbomachinery, 123(1), 154-160
Heat transfer characteristics of an impingement plate used in a turbine vane cooling system
Son C, Gillespie D, Ireland P & Dailey GM (2001), Proceedings of the ASME Turbo Expo, 3
High temperature turbine exhaust flow test facility
Griffin DK, Ireland PT & Ponton AJ (2000), 21st Aerodynamic Measurement Technology and Ground Testing Conference
BibTeX
@inproceedings{hightemperature-2000/12,
title={High temperature turbine exhaust flow test facility},
author={Griffin DK, Ireland PT & Ponton AJ},
year = "2000"
}
Visualisation of turbulent spots under the influence of adverse pressure gradients
Zhong S, Kittichaikan C, Hodson HP & Ireland PT (2000), Experiments in Fluids, 28(5), 385-393
Liquid crystal measurements of heat transfer and surface shear stress
Ireland PT & Jones TV (2000), Measurement Science and Technology, 11(7), 969-986
Heat transfer and flow characteristics of an engine representative impingement cooling system
Son C, Gillespie D, Ireland P & Dailey GM (2000), Proceedings of the ASME Turbo Expo, 3
Detailed flow and heat transfer coefficient measurements in a model of an internal cooling geometry employing orthogonal intersecting channels
Gillespie DRH, Ireland PT & Dailey GM (2000), Proceedings of the ASME Turbo Expo, 3
High temperature turbine exhaust flow test facility
Griffin DK, Ireland PT & Ponton AJ (2000), 21st Aerodynamic Measurement Technology and Ground Testing Conference
Detailed pressure survey of a lattice valve seal under high-flow conditions
Long GL, Ireland PT, Rigby MJ, IMECHE & IMECHE (2000), HYDROPOWER DEVELOPMENTS - NEW PROJECTS AND REHABILITATION, 2000(17), 3-10
BibTeX
@inproceedings{detailedpressur-2000/,
title={Detailed pressure survey of a lattice valve seal under high-flow conditions},
author={Long GL, Ireland PT, Rigby MJ, IMECHE & IMECHE },
pages={3-10},
year = "2000"
}
Turbulent heat transfer measurements using liquid crystals
Ireland PT, Neely AJ, Gillespie DRH & Robertson AJ (1999), INTERNATIONAL JOURNAL OF HEAT AND FLUID FLOW, 20(4), 355-367
A study of unsteady wake-induced boundary-layer transition with thermochromic liquid crystals
Zhong S, Kittichaikan C, Hudson HP & Ireland PT (1999), Proceedings of the Institution of Mechanical Engineers, Part G: Journal of Aerospace Engineering, 213(3), 163-171
BibTeX
@article{astudyofunstead-1999/1,
title={A study of unsteady wake-induced boundary-layer transition with thermochromic liquid crystals},
author={Zhong S, Kittichaikan C, Hudson HP & Ireland PT},
journal={Proceedings of the Institution of Mechanical Engineers, Part G: Journal of Aerospace Engineering},
volume={213},
pages={163-171},
year = "1999"
}
Visualization of turbulent spots and unsteady wake-induced boundary-layer transition with thermochromic liquid crystals
Zhong S, Kittichaikan C, Hodson HP & Ireland PT (1999), Optics and Laser Technology, 31(1), 33-39
BibTeX
@article{visualizationof-1999/1,
title={Visualization of turbulent spots and unsteady wake-induced boundary-layer transition with thermochromic liquid crystals},
author={Zhong S, Kittichaikan C, Hodson HP & Ireland PT},
journal={Optics and Laser Technology},
volume={31},
pages={33-39},
year = "1999"
}
Measurement of the temperature field downstream of simulated leading-edge film-cooling holes
Mee DJ, Ireland PT & Bather S (1999), Experiments in Fluids, 27(3), 273-283
An investigation on the onset of wake-induced transition and turbulent spot production rate using thermochromic liquid crystals
Kittichaikarn C, Ireland PT, Zhong S & Hodson HP (1999), Proceedings of the ASME Turbo Expo, 3
Pilot study to investigate novel experimental and theoretical fire-event modelling techniques
Neely AJ, Ireland PT & Mullender AJ (1999), 37th Aerospace Sciences Meeting and Exhibit
BibTeX
@inproceedings{pilotstudytoinv-1999/1,
title={Pilot study to investigate novel experimental and theoretical fire-event modelling techniques},
author={Neely AJ, Ireland PT & Mullender AJ},
year = "1999"
}
Pilot study to investigate novel experimental and theoretical fire-event modelling techniques
Neely AJ, Ireland PT & Mullender AJ (1999), 37th Aerospace Sciences Meeting and Exhibit
BibTeX
@inproceedings{pilotstudytoinv-1999/1,
title={Pilot study to investigate novel experimental and theoretical fire-event modelling techniques},
author={Neely AJ, Ireland PT & Mullender AJ},
year = "1999"
}
Detailed heat transfer measurements in an engine representative impingement cooling system using liquid crystals
Son C, Michaelis M, Robertson A, Ireland P & Bather S (1998), American Society of Mechanical Engineers, Heat Transfer Division, (Publication) HTD, 361-3, 389-397
BibTeX
@inproceedings{detailedheattra-1998/12,
title={Detailed heat transfer measurements in an engine representative impingement cooling system using liquid crystals},
author={Son C, Michaelis M, Robertson A, Ireland P & Bather S},
pages={389-397},
year = "1998"
}
Full surface local heat transfer coefficient measurements in a model of an integrally cast impingement cooling geometry
Gillespie DRH, Wang Z, Ireland PT & Kohler ST (1998), JOURNAL OF TURBOMACHINERY-TRANSACTIONS OF THE ASME, 120(1), 92-99
Heat transfer measurements to a gas turbine cooling passage with inclined ribs
Wang Z, Ireland PT, Kohler ST & Chew JW (1998), Journal of Turbomachinery, 120(1), 63-69
Detailed Heat Transfer Measurements in an Engine Representative Impingement Cooling System using Liquid Crystals
Son C, Michaelis M, Robertson A, Ireland P & Bather S (1998), ASME International Mechanical Engineering Congress and Exposition, Proceedings (IMECE), 1998-O, 389-397
Local heat transfer coefficients on flat continuous, flat interrupted and corrugated external cooling fins
Robertson AJ, Neely AJ, Ireland PT & Harper LR (1997), American Society of Mechanical Engineers (Paper)
BibTeX
@article{localheattransf-1997/12,
title={Local heat transfer coefficients on flat continuous, flat interrupted and corrugated external cooling fins},
author={Robertson AJ, Neely AJ, Ireland PT & Harper LR},
journal={American Society of Mechanical Engineers (Paper)},
year = "1997"
}
Heat transfer coefficient distributions for the convective cooling of non-cylindrical geometries in crossflow using extended surfaces
Neely AJ, Ireland PT & Harper LR (1997), American Society of Mechanical Engineers (Paper)
BibTeX
@article{heattransfercoe-1997/12,
title={Heat transfer coefficient distributions for the convective cooling of non-cylindrical geometries in crossflow using extended surfaces},
author={Neely AJ, Ireland PT & Harper LR},
journal={American Society of Mechanical Engineers (Paper)},
year = "1997"
}
Extended surface convective cooling studies of engine components using the transient liquid crystal technique
Neely AJ, Ireland PT & Harper LR (1997), Proceedings of the Institution of Mechanical Engineers, Part A: Journal of Power and Energy, 211(3), 273-287
BibTeX
@article{extendedsurface-1997/1,
title={Extended surface convective cooling studies of engine components using the transient liquid crystal technique},
author={Neely AJ, Ireland PT & Harper LR},
journal={Proceedings of the Institution of Mechanical Engineers, Part A: Journal of Power and Energy},
volume={211},
pages={273-287},
year = "1997"
}
Extended surface convective cooling studies of engine components using the transient liquid crystal technique
Neely AJ, Ireland PT & Harper LR (1997), Proceedings of the 1997 2nd European Conference on Turbomachinery - Fluid Dynamics and Thermodynamics, Antwerpen, Belgium, 5-7 March 1997, 463-474
BibTeX
@article{extendedsurface-1997/1,
title={Extended surface convective cooling studies of engine components using the transient liquid crystal technique},
author={Neely AJ, Ireland PT & Harper LR},
journal={Proceedings of the 1997 2nd European Conference on Turbomachinery - Fluid Dynamics and Thermodynamics, Antwerpen, Belgium, 5-7 March 1997},
pages={463-474},
year = "1997"
}
Heat transfer coefficient distributions for the convective cooling of non-cylindrical geometries in crossflow using extended surfaces
Neely AJ, Ireland PT & Harper LR (1997), Proceedings of the ASME Turbo Expo, 3
Local heat transfer coefficients on flat continuous, flat interrupted and corrugated external cooling fins
Robertson AJ, Neely AJ, Ireland PT & Harper LR (1997), Proceedings of the ASME Turbo Expo, 3
Detailed measurements of local heat transfer coefficient in the entrance to normal and inclined film cooling holes
Gillespie DRH, Byerley AR, Ireland PT, Wang Z, Jones TV et al. (1996), JOURNAL OF TURBOMACHINERY-TRANSACTIONS OF THE ASME, 118(2), 285-290
Heat transfer enhancement within a turbine blade cooling passage using ribs and combinations of ribs with film cooling holes
Shen JR, Wang Z, Ireland PT, Jones TV & Byerley AR (1996), Journal of Turbomachinery, 118(3), 428-434
BibTeX
@article{heattransferenh-1996/1,
title={Heat transfer enhancement within a turbine blade cooling passage using ribs and combinations of ribs with film cooling holes},
author={Shen JR, Wang Z, Ireland PT, Jones TV & Byerley AR},
journal={Journal of Turbomachinery},
volume={118},
pages={428-434},
year = "1996"
}
A color image processing system for transient liquid crystal heat transfer experiments
Wang Z, Ireland PT, Jones TV & Davenport R (1996), Journal of Turbomachinery, 118(3), 421-427
Gas temperature measurement in internal cooling passages
Wang Z, Ireland PT & Kohler ST (1996), American Society of Mechanical Engineers (Paper)
BibTeX
@article{gastemperaturem-1996/1,
title={Gas temperature measurement in internal cooling passages},
author={Wang Z, Ireland PT & Kohler ST},
journal={American Society of Mechanical Engineers (Paper)},
year = "1996"
}
Comparison of full surface local heat transfer coefficient and flow field studies beneath sharp-edged and radiused entry impinging jets
Gillespie DRH, Guo SM, Wang Z, Ireland PT & Kohler ST (1996), American Society of Mechanical Engineers (Paper)
BibTeX
@article{comparisonofful-1996/1,
title={Comparison of full surface local heat transfer coefficient and flow field studies beneath sharp-edged and radiused entry impinging jets},
author={Gillespie DRH, Guo SM, Wang Z, Ireland PT & Kohler ST},
journal={American Society of Mechanical Engineers (Paper)},
year = "1996"
}
Full surface local heat transfer coefficient measurements in a model of an integrally cast impingement cooling geometry
Gillespie DRH, Wang Z, Ireland PT & Kohler ST (1996), American Society of Mechanical Engineers (Paper)
BibTeX
@article{fullsurfaceloca-1996/1,
title={Full surface local heat transfer coefficient measurements in a model of an integrally cast impingement cooling geometry},
author={Gillespie DRH, Wang Z, Ireland PT & Kohler ST},
journal={American Society of Mechanical Engineers (Paper)},
year = "1996"
}
Heat transfer measurements to a gas turbine cooling passage with inclined ribs
Wang Z, Ireland PT, Kohler ST & Chew JW (1996), American Society of Mechanical Engineers (Paper)
BibTeX
@article{heattransfermea-1996/1,
title={Heat transfer measurements to a gas turbine cooling passage with inclined ribs},
author={Wang Z, Ireland PT, Kohler ST & Chew JW},
journal={American Society of Mechanical Engineers (Paper)},
year = "1996"
}
A comparison of full surface local heat transfer coefficient and flow field studies beneath sharp-edged and radiused entry impinging jets
Gillespie DRH, Guo SM, Wang Z, Ireland PT & Kohler ST (1996), ASME 1996 International Gas Turbine and Aeroengine Congress and Exhibition, GT 1996, 4
Heat transfer measurements to a gas turbine cooling passage with inclined ribs
Wang Z, Ireland PT, Kohler ST & Chew JW (1996), ASME 1996 International Gas Turbine and Aeroengine Congress and Exhibition, GT 1996, 4
Full surface local heat transfer coefficient measurements in a model of an integrally cast impingement cooling geometry
Gillesple DRH, Wang Z, Ireland PT & Kohler ST (1996), ASME 1996 International Gas Turbine and Aeroengine Congress and Exhibition, GT 1996, 4
The role of the impingement plate in array heat transfer
Van Treuren KW, Wang Z, Ireland P, Jones TV & Kohler ST (1996), ASME 1996 International Gas Turbine and Aeroengine Congress and Exhibition, GT 1996, 4
Comparison and prediction of local and average heat transfer coefficients under an array of inljne and staggered impinging jets
Van Treuren KW, Wang Z, Ireland P, Jones TV & Kohler ST (1996), ASME 1996 International Gas Turbine and Aeroengine Congress and Exhibition, GT 1996, 4
Gas temperature measurement in internal cooling passages
Wang Z, Ireland PT & Kohler ST (1996), ASME 1996 International Gas Turbine and Aeroengine Congress and Exhibition, GT 1996, 4
Role of the impingement plate in array heat transfer
Van Treuren KW, Wang Z, Ireland P, Jones TV & Kohler ST (1996), American Society of Mechanical Engineers (Paper)
BibTeX
@inproceedings{roleoftheimping-1996/1,
title={Role of the impingement plate in array heat transfer},
author={Van Treuren KW, Wang Z, Ireland P, Jones TV & Kohler ST},
year = "1996"
}
Comparison and prediction of local and average heat transfer coefficients under an array of inline and staggered impinging jets
Van Treuren KW, Wang Z, Ireland P, Jones TV & Kohler ST (1996), American Society of Mechanical Engineers (Paper)
BibTeX
@inproceedings{comparisonandpr-1996/1,
title={Comparison and prediction of local and average heat transfer coefficients under an array of inline and staggered impinging jets},
author={Van Treuren KW, Wang Z, Ireland P, Jones TV & Kohler ST},
year = "1996"
}
Detailed heat transfer coefficient measurements and thermal analysis at engine conditions of a pedestal with fillet radii
Wang Z, Ireland PT & Jones TV (1995), Journal of Turbomachinery, 117(2), 290-297
An advanced method of processing liquid crystal video signals from transient heat transfer experiments
Wang Z, Ireland PT & Jones TV (1995), Journal of Turbomachinery, 117(1), 184-189
Detailed measurements of local heat transfer coefficient and adiabatic wall temperature beneath an array of impinging jets
Van Treuren KW, Wang Z, Ireland PT & Jones TV (1994), Journal of Turbomachinery, 116(3), 369-374
BibTeX
@article{detailedmeasure-1994/1,
title={Detailed measurements of local heat transfer coefficient and adiabatic wall temperature beneath an array of impinging jets},
author={Van Treuren KW, Wang Z, Ireland PT & Jones TV},
journal={Journal of Turbomachinery},
volume={116},
pages={369-374},
year = "1994"
}
Detailed measurements of local heat transfer coefficient in the entrance to normal and inclined film cooling holes
Gillespie DRH, Byerley AR, Ireland PT, Wang Z, Jones TV et al. (1994), American Society of Mechanical Engineers (Paper), 1-8
BibTeX
@article{detailedmeasure-1994/1,
title={Detailed measurements of local heat transfer coefficient in the entrance to normal and inclined film cooling holes},
author={Gillespie DRH, Byerley AR, Ireland PT, Wang Z, Jones TV et al.},
journal={American Society of Mechanical Engineers (Paper)},
pages={1-8},
year = "1994"
}
Local heat transfer coefficient and adiabatic wall temperature measurement beneath arrays of staggered and inline impinging jets
Van Treuren KW, Wang Z, Ireland PT, Jones TV & Kohler ST (1994), American Society of Mechanical Engineers (Paper), 1-10
BibTeX
@article{localheattransf-1994/1,
title={Local heat transfer coefficient and adiabatic wall temperature measurement beneath arrays of staggered and inline impinging jets},
author={Van Treuren KW, Wang Z, Ireland PT, Jones TV & Kohler ST},
journal={American Society of Mechanical Engineers (Paper)},
pages={1-10},
year = "1994"
}
Colour image processing system for transient liquid crystal heat transfer experiments
Wang Z, Ireland PT, Jones TV & Davenport R (1994), American Society of Mechanical Engineers (Paper), 1-11
BibTeX
@article{colourimageproc-1994/1,
title={Colour image processing system for transient liquid crystal heat transfer experiments},
author={Wang Z, Ireland PT, Jones TV & Davenport R},
journal={American Society of Mechanical Engineers (Paper)},
pages={1-11},
year = "1994"
}
Local heat transfer coefficient and adiabatic wall temperature measurement beneath arrays of staggered and inline impinging jets
Van Treuren KW, Wang Z, Ireland PT, Jones TV & Kohler ST (1994), Proceedings of the ASME Turbo Expo, 4
Detailed measurements of local heat transfer coefficient in the entrance to normal and inclined film cooling holes
Gillespie DRH, Byerley AR, Ireland PT, Wang Z, Jones TV et al. (1994), Proceedings of the ASME Turbo Expo, 4
Measurements of local heat transfer coefficient over the full surface of a bank of pedestals with fillet radii
Wang Z, Ireland P, Jones T & Kohler ST (1994), Proceedings of the ASME Turbo Expo, 4
A colour image processing system for transient liquid crystal heat transfer experiments
Wang Z, Ireland PT, Jones TV & Davenport R (1994), Proceedings of the ASME Turbo Expo, 4
Heat transfer enhancement within a turbine blade cooling passage using ribs and combinations of ribs with film cooling holes
Shen JR, Wang Z, Ireland PT, Jones TV & Byerley AR (1994), Proceedings of the ASME Turbo Expo, 4
Measurements of local heat transfer coefficient over the full surface of a bank of pedestals with fillet radii
Wang Z, Ireland P, Jones T & Kohler ST (1994), American Society of Mechanical Engineers (Paper), 1-8
BibTeX
@inproceedings{measurementsofl-1994/1,
title={Measurements of local heat transfer coefficient over the full surface of a bank of pedestals with fillet radii},
author={Wang Z, Ireland P, Jones T & Kohler ST},
pages={1-8},
year = "1994"
}
Heat transfer enhancement within a turbine blade cooling passage using ribs and combinations of ribs with film cooling holes
Shen JR, Wang Z, Ireland PT, Jones TV & Byerley AR (1994), American Society of Mechanical Engineers (Paper), 1-8
MEASUREMENTS OF LOCAL HEAT TRANSFER COEFFICIENT OVER THE FULL SURFACE OF A BANK OF PEDESTALS WITH FILLET RADII
Wang Z, Ireland P, Jones T & Kohler ST (1994), Proceedings of the ASME Turbo Expo, 4
LOCAL HEAT TRANSFER COEFFICIENT AND ADIABATIC WALL TEMPERATURE MEASUREMENT BENEATH ARRAYS OF STAGGERED AND INLINE IMPINGING JETS
Van Treuren KW, Wang Z, Ireland PT, Jones TV & Kohler ST (1994), Proceedings of the ASME Turbo Expo, 4
A COLOUR IMAGE PROCESSING SYSTEM FOR TRANSIENT LIQUID CRYSTAL HEAT TRANSFER EXPERIMENTS
Wang Z, Ireland PT, Jones TV & Davenport R (1994), Proceedings of the ASME Turbo Expo, 4
DETAILED MEASUREMENTS OF LOCAL HEAT TRANSFER COEFFICIENT IN THE ENTRANCE TO NORMAL AND INCLINED FILM COOLING HOLES
Gillespie DRH, Byerley AR, Ireland PT, Wang Z, Jones TV et al. (1994), Proceedings of the ASME Turbo Expo, 4
Determination of the temperature of a hot ceramic candle filter during cool gas cleaning
Ireland P, Tustin M & Hudson D (1993), American Society of Mechanical Engineers, International Gas Turbine Institute (Publication) IGTI, 8, 45-53
BibTeX
@inproceedings{determinationof-1993/12,
title={Determination of the temperature of a hot ceramic candle filter during cool gas cleaning},
author={Ireland P, Tustin M & Hudson D},
pages={45-53},
year = "1993"
}
Detailed heat transfer coefficient measurements and thermal analysis at engine conditions of a pedestal with fillet radii
Wang Z, Ireland PT & Jones TV (1993), American Society of Mechanical Engineers (Paper), 1-10
BibTeX
@article{detailedheattra-1993/1,
title={Detailed heat transfer coefficient measurements and thermal analysis at engine conditions of a pedestal with fillet radii},
author={Wang Z, Ireland PT & Jones TV},
journal={American Society of Mechanical Engineers (Paper)},
pages={1-10},
year = "1993"
}
Detailed measurements of local heat transfer coefficient and adiabatic wall temperature beneath an array of impinging jets
Van Treuren KW, Wang Z, Ireland PT & Jones TV (1993), American Society of Mechanical Engineers (Paper)
BibTeX
@article{detailedmeasure-1993/1,
title={Detailed measurements of local heat transfer coefficient and adiabatic wall temperature beneath an array of impinging jets},
author={Van Treuren KW, Wang Z, Ireland PT & Jones TV},
journal={American Society of Mechanical Engineers (Paper)},
year = "1993"
}
Advanced method of processing liquid crystal video signals from transient heat transfer experiments
Wang Z, Ireland PT & Jones TV (1993), American Society of Mechanical Engineers (Paper), 1-7
BibTeX
@article{advancedmethodo-1993/1,
title={Advanced method of processing liquid crystal video signals from transient heat transfer experiments},
author={Wang Z, Ireland PT & Jones TV},
journal={American Society of Mechanical Engineers (Paper)},
pages={1-7},
year = "1993"
}
Detailed measurements of local heat transfer coefficient and adiabatic wall temperature beneath an array of impinging jets
Van Treuren KW, Wang Z, Ireland PT & Jones TV (1993), ASME 1993 International Gas Turbine and Aeroengine Congress and Exposition, GT 1993, 3A
An advanced method of processing liquid crystal video signals from transient heat transfer experiments
Wang Z, Ireland PT & Jones TV (1993), ASME 1993 International Gas Turbine and Aeroengine Congress and Exposition, GT 1993, 3B
Detailed heat transfer coefficient measurements and thermal analysis at engine conditions of a pedestal with fillet radii
Wang Z, Ireland PT & Jones TV (1993), ASME 1993 International Gas Turbine and Aeroengine Congress and Exposition, GT 1993, 3B
Internal cooling passage heat transfer near the entrance to a film cooling hole: Experimental and Computational results
Byerley AR, Jones TV & Ireland PT (1992), ASME 1992 International Gas Turbine and Aeroengine Congress and Exposition, GT 1992, 4
Technique for measuring convective heat transfer at rough surfaces
Wang Z, Ireland PT & Jones TV (1991), Transactions of the Institute of Measurement and Control, 13(3), 145-154
Technique for measuring convective heat transfer at rough surfaces
Wang Z, Ireland PT & Jones TV (1990), American Society of Mechanical Engineers (Paper)
BibTeX
@article{techniqueformea-1990/1,
title={Technique for measuring convective heat transfer at rough surfaces},
author={Wang Z, Ireland PT & Jones TV},
journal={American Society of Mechanical Engineers (Paper)},
year = "1990"
}
A technique for measuring convective heat transfer at rough surfaces
Wang Z, Ireland PT & Jones TV (1990), Proceedings of the ASME Turbo Expo, 4
A Comparison of the Transient and Heated-Coating Methods for the Measurement of Local Heat Transfer Coefficients on a Pin Fin
Baughn JW, Ireland PT, Jones TV & Saniei N (1989), JOURNAL OF HEAT TRANSFER-TRANSACTIONS OF THE ASME, 111(1-4), 877-881
BibTeX
@article{acomparisonofth-1989/2,
title={A Comparison of the Transient and Heated-Coating Methods for the Measurement of Local Heat Transfer Coefficients on a Pin Fin},
author={Baughn JW, Ireland PT, Jones TV & Saniei N},
journal={JOURNAL OF HEAT TRANSFER-TRANSACTIONS OF THE ASME},
volume={111},
pages={877-881},
year = "1989"
}
DETAILED HEAT TRANSFER MEASUREMENTS NEAR AND WITHIN THE ENTRANCE OF A FILM COOLING HOLE.
Byerley AR, Ireland PT, Jones TV & Ashton SA (1988), American Society of Mechanical Engineers (Paper)
BibTeX
@article{detailedheattra-1988/1,
title={DETAILED HEAT TRANSFER MEASUREMENTS NEAR AND WITHIN THE ENTRANCE OF A FILM COOLING HOLE.},
author={Byerley AR, Ireland PT, Jones TV & Ashton SA},
journal={American Society of Mechanical Engineers (Paper)},
year = "1988"
}
Detailed heat transfer measurements near and within the entrance of a film cooling hole
Byerley AR, Ireland PT, Jones TV & Ashton SA (1988), Proceedings of the ASME Turbo Expo, 4
COMPARISON OF THE TRANSIENT AND HEATED-COATING METHODS FOR THE MEASUREMENT OF LOCAL HEAT TRANSFER COEFFICIENTS ON A PIN FIN.
Baughn JW, Ireland PT, Jones TV & Saniei N (1988), American Society of Mechanical Engineers (Paper)
BibTeX
@inproceedings{comparisonofthe-1988/1,
title={COMPARISON OF THE TRANSIENT AND HEATED-COATING METHODS FOR THE MEASUREMENT OF LOCAL HEAT TRANSFER COEFFICIENTS ON A PIN FIN.},
author={Baughn JW, Ireland PT, Jones TV & Saniei N},
year = "1988"
}
The response time of a surface thermometer employing encapsulated thermochromic liquid crystals
Ireland PT & Jones TV (1987), Journal of Physics E: Scientific Instruments, 20(10), 1195-1199
Internal cooling of turbine blades
Ireland PT (1987)
BibTeX
@misc{internalcooling-1987/10,
title={Internal cooling of turbine blades},
author={Ireland PT},
year = "1987"
}
DETAILED MEASUREMENTS OF HEAT TRANSFER ON AND AROUND A PEDESTAL IN FULLY DEVELOPED PASSAGE FLOW.
Ireland PT & Jones TV (1986), Heat Transfer, Proceedings of the International Heat Transfer Conference, 3, 975-980
BibTeX
@article{detailedmeasure-1986/1,
title={DETAILED MEASUREMENTS OF HEAT TRANSFER ON AND AROUND A PEDESTAL IN FULLY DEVELOPED PASSAGE FLOW.},
author={Ireland PT & Jones TV},
journal={Heat Transfer, Proceedings of the International Heat Transfer Conference},
volume={3},
pages={975-980},
year = "1986"
}
The Potential Impact of Propulsion Technology on Emissions and Energy Security
Ireland PT (0)
BibTeX
@misc{thepotentialimp-/,
title={The Potential Impact of Propulsion Technology on Emissions and Energy Security},
author={Ireland PT}
}
Turbine Blade Cooling
Ireland PT (0)
BibTeX
@misc{turbinebladecoo-/,
title={Turbine Blade Cooling},
author={Ireland PT}
}
Turbulence Levels are High at the Combuster-Turbine Interface
Cha CM, Ireland PT, Denman PA & Savarianandam V (0)
BibTeX
@inproceedings{turbulencelevel-/,
title={Turbulence Levels are High at the Combuster-Turbine Interface},
author={Cha CM, Ireland PT, Denman PA & Savarianandam V},
booktitle={ASME Turbo Expo 2012 GT2012}
}
Influence of film cooling hole angles and geometries on aerodynamic loss and net heat flux reduction
Ireland PT, Lim CH, Pullan G & Ireland P (0), 5(PARTS A AND B), 353-367
Detailed performance assessment of 16% blockage interrupted ribs at 60 degree inclination in a square section turbine blade cooling passage
Ireland PT, gillespie D, dailey G & tsang C (0)
BibTeX
@inproceedings{detailedperform-/,
title={Detailed performance assessment of 16% blockage interrupted ribs at 60 degree inclination in a square section turbine blade cooling passage},
author={Ireland PT, gillespie D, dailey G & tsang C},
booktitle={ATO RTA / AVT Symposium on Advanced Flow Management}
}
Reduced Instrumentation Heat Transfer Testing of Model Turbine Blade Cooling Systems
Ireland PT, tsang C, gillespie D & dailey G (0)
BibTeX
@inproceedings{reducedinstrume-/,
title={Reduced Instrumentation Heat Transfer Testing of Model Turbine Blade Cooling Systems},
author={Ireland PT, tsang C, gillespie D & dailey G},
booktitle={RTA /AVT Symposium on Advanced Flow Management}
}
Compact low temperature analogue of aero-engine fire certification research
Ireland PT, talib A, neely A & mullender A (0)
BibTeX
@inproceedings{compactlowtempe-/,
title={Compact low temperature analogue of aero-engine fire certification research},
author={Ireland PT, talib A, neely A & mullender A},
booktitle={ASME IGTI Turbo Expo}
}
Development and validation of empirical models of impingement cooling from full surface heat transfer coefficient distributions
Ireland PT, gillespie D, son C & dailey G (0)
BibTeX
@inproceedings{developmentandv-/,
title={Development and validation of empirical models of impingement cooling from full surface heat transfer coefficient distributions},
author={Ireland PT, gillespie D, son C & dailey G},
booktitle={NATO RTA / AVT Symposium on Advanced Flow Management}
}
A detailed loss analysis of a dual seal lattice blade butterfly valve
Ireland PT, telisinghe J & martin J (0)
BibTeX
@inproceedings{adetailedlossan-/,
title={A detailed loss analysis of a dual seal lattice blade butterfly valve},
author={Ireland PT, telisinghe J & martin J},
booktitle={Seminar on Hydropower developments}
}
Near wall flow characteristics beneath a turbulent impinging jet
Ireland PT, ashforth-frost S & cheong B (0), 2, 987-992
BibTeX
@inproceedings{nearwallflowcha-/,
title={Near wall flow characteristics beneath a turbulent impinging jet},
author={Ireland PT, ashforth-frost S & cheong B},
booktitle={5th world conference on experimental heat transfer},
pages={987-992}
}
The visualisation and measurement of the onset, turbulent spot production rate, intermittency and heat transfer during wake-induced transition using thermochromic liquid crystals
Ireland PT, kittichaikarn C, zhong S & hodson H (0)
BibTeX
@inproceedings{thevisualisatio-/,
title={The visualisation and measurement of the onset, turbulent spot production rate, intermittency and heat transfer during wake-induced transition using thermochromic liquid crystals},
author={Ireland PT, kittichaikarn C, zhong S & hodson H},
booktitle={Minnowbrook III: 2000 Workshop on Boundary Layer Transition and Unsteady Aspects of Turbomachinery Flows}
}
Combustor burn through plumes: demonstration and protection
Ireland PT, mullender A & coney M (0)(paper 1222)
BibTeX
@inproceedings{combustorburnth-/,
title={Combustor burn through plumes: demonstration and protection},
author={Ireland PT, mullender A & coney M},
booktitle={ISABE 2003}
}
Effect of temperature spatial non-uniformity on electrochemical impedance in lithium-ion cells
Ireland PT, Richardson R & Howey D (0)
BibTeX
@inproceedings{effectoftempera-/,
title={Effect of temperature spatial non-uniformity on electrochemical impedance in lithium-ion cells},
author={Ireland PT, Richardson R & Howey D},
booktitle={Proceedings of the 10th Symposium on Fuel Cell and Battery Modelling and Experimental Validation}
}
Transfer Coefficient on a Transonic Squealer Tip
Ireland P, Romero E, Coull J, Li H, Wong T et al. (0), Journal of Turbomachinery
BibTeX
@article{transfercoeffic-/,
title={Transfer Coefficient on a Transonic Squealer Tip},
author={Ireland P, Romero E, Coull J, Li H, Wong T et al.},
journal={Journal of Turbomachinery},
publisher={American Society of Mechanical Engineers}
}