Showing 160 publications by Clive Siviour
Mechanical response of four polycarbonates at a wide range of strain rates and temperatures
Song P, Trivedi AR & Siviour CR (2023), Polymer Testing, 107986-107986
Experimental analysis of the multiaxial failure stress locus of commercially pure titanium at low and high rates of strain
Xu Y, Lopez MA, Zhou J, Farbaniec L, Patsias S et al. (2022), International Journal of Impact Engineering, 170, 104341-104341
BibTeX
@article{experimentalana-2022/12,
title={Experimental analysis of the multiaxial failure stress locus of commercially pure titanium at low and high rates of strain},
author={Xu Y, Lopez MA, Zhou J, Farbaniec L, Patsias S et al.},
journal={International Journal of Impact Engineering},
volume={170},
number={104341},
pages={104341-104341},
publisher={Elsevier BV},
year = "2022"
}
Experimentally simulating adiabatic behaviour: Capturing the high strain rate compressive response of polymers using low strain rate experiments with programmed temperature profiles
Trivedi AR, Song P & Siviour CR (2022), Polymer Testing, 107773-107773
BibTeX
@article{experimentallys-2022/9,
title={Experimentally simulating adiabatic behaviour: Capturing the high strain rate compressive response of polymers using low strain rate experiments with programmed temperature profiles},
author={Trivedi AR, Song P & Siviour CR},
journal={Polymer Testing},
number={107773},
pages={107773-107773},
publisher={Elsevier BV},
year = "2022"
}
Investigating Iron Alloy Phase Changes Using High Temperature In Situ SEM Techniques.
Heard R, Siviour CR & Dragnevski K (2022), Materials (Basel, Switzerland), 15(11), 3921
The mechanical response of commercially pure copper under multiaxial loading at low and high strain rates
Zhou J, Xu Y, Lopez MA, Farbaniec L, Patsias S et al. (2022), International Journal of Mechanical Sciences, 224
BibTeX
@article{themechanicalre-2022/5,
title={The mechanical response of commercially pure copper under multiaxial loading at low and high strain rates},
author={Zhou J, Xu Y, Lopez MA, Farbaniec L, Patsias S et al.},
journal={International Journal of Mechanical Sciences},
volume={224},
number={107340},
publisher={Elsevier},
year = "2022"
}
Application of the Photon Doppler Velocimetry (PDV) technique in tension-torsion Hopkinson bar experiments
Farbaniec L, Xu Y, Zhou J, Patsias S, MacDougall D et al. (2021), EPJ Web of Conferences, 250
BibTeX
@inproceedings{applicationofth-2021/9,
title={Application of the Photon Doppler Velocimetry (PDV) technique in tension-torsion Hopkinson bar experiments},
author={Farbaniec L, Xu Y, Zhou J, Patsias S, MacDougall D et al.},
booktitle={DYMAT 2021 - 13th International Conference on the Mechanical and Physical Behaviour of Materials under Dynamic Loading},
year = "2021"
}
Contributions to Dynamic Behaviour of Materials Professor John Edwin Field, FRS 1936-2020
Andrews DR, Bourne NK, Brown EN, Dear JP, Dickson P et al. (2021), JOURNAL OF DYNAMIC BEHAVIOR OF MATERIALS, 7(3), 353-382
BibTeX
@article{contributionsto-2021/9,
title={Contributions to Dynamic Behaviour of Materials Professor John Edwin Field, FRS 1936-2020},
author={Andrews DR, Bourne NK, Brown EN, Dear JP, Dickson P et al.},
journal={JOURNAL OF DYNAMIC BEHAVIOR OF MATERIALS},
volume={7},
pages={353-382},
year = "2021"
}
Characterising the frequency-response of ultra-soft polymers with the Virtual Fields Method
Graham A & Siviour C (2021), Strain, 57(5)
High-rate nanofluidic energy absorption in porous zeolitic frameworks
Sun Y, Rogge SMJ, Lamaire A, Vandenbrande S, Wieme J et al. (2021), Nature Materials, 20, 1015-1023
Mechanical characterisation and modelling of a thermoreversible superamolecular polyurethane over a wide range of rates
Chen H, Hart LR, Hayes W & Siviour C (2021), Polymer, 221
BibTeX
@article{mechanicalchara-2021/3,
title={Mechanical characterisation and modelling of a thermoreversible superamolecular polyurethane over a wide range of rates},
author={Chen H, Hart LR, Hayes W & Siviour C},
journal={Polymer},
volume={221},
number={123607},
publisher={Elsevier},
year = "2021"
}
The Development of Split Hopkinson Tension-Torsion Bar for the Understanding of Complex Stress States at High Rate
Xu Y, Farbaniec L, Siviour C, Eakins D & Pellegrino A (2021), Conference Proceedings of the Society for Experimental Mechanics Series, 89-93
A Novel Method of Validating Polymer Relaxation Using Hopkinson Bar and Quasi-Static Loading
Commins TR & Siviour CR (2021), Conference Proceedings of the Society for Experimental Mechanics Series, 69-73
Application of linear viscoelastic continuum damage theory to the low and high strain rate response of thermoplastic polyurethane
Chen H, Trivedi A & Siviour C (2020), Experimental Mechanics, 60, 925-936
BibTeX
@article{applicationofli-2020/6,
title={Application of linear viscoelastic continuum damage theory to the low and high strain rate response of thermoplastic polyurethane},
author={Chen H, Trivedi A & Siviour C},
journal={Experimental Mechanics},
volume={60},
pages={925-936},
publisher={Springer Nature},
year = "2020"
}
An investigation into experimental in situ scanning electron microscope (SEM) imaging at high temperature
Heard R, Huber J, Siviour C, Edwards G, Williamson-Brown E et al. (2020), Review of Scientific Instruments, 91(6)
BibTeX
@article{aninvestigation-2020/6,
title={An investigation into experimental in situ scanning electron microscope (SEM) imaging at high temperature},
author={Heard R, Huber J, Siviour C, Edwards G, Williamson-Brown E et al.},
journal={Review of Scientific Instruments},
volume={91},
number={063702 },
publisher={AIP Publishing},
year = "2020"
}
In situ SEM analysis of surface oxidation mechanisms in carbon steel during vacuum heat treatment
Heard R, Siviour C & Dragnevski K (2020), Materials Today: Proceedings, 33(Part 4), 1898-1903
BibTeX
@article{insitusemanalys-2020/6,
title={In situ SEM analysis of surface oxidation mechanisms in carbon steel during vacuum heat treatment},
author={Heard R, Siviour C & Dragnevski K},
journal={Materials Today: Proceedings},
volume={33},
pages={1898-1903},
publisher={Elsevier},
year = "2020"
}
A simple rate-temperature dependent hyperelastic model applied to neoprene rubber
Trivedi A & Siviour C (2020), Journal of Dynamic Behavior of Materials, 6, 336-347
A novel methodology for predicting the high rate mechanical response of polymers from low rate data: Application to (plasticised) poly(vinyl chloride)
Trivedi A & Siviour C (2020), Mechanics of Time-Dependent Materials, 25(3), 383-409
BibTeX
@article{anovelmethodolo-2020/5,
title={A novel methodology for predicting the high rate mechanical response of polymers from low rate data: Application to (plasticised) poly(vinyl chloride)},
author={Trivedi A & Siviour C},
journal={Mechanics of Time-Dependent Materials},
volume={25},
pages={383-409},
publisher={Springer},
year = "2020"
}
In‐situ SEM observation of grain growth in the austenitic region of carbon steel using thermal etching
Heard R, Dragnevski K & Siviour C (2020), Journal of Microscopy, 279(3), 249-255
Application of Linear Viscoelastic Continuum Damage Theory to the Low and High Strain Rate Response of Thermoplastic Polyurethane
Chen H & Siviour CR (2020), Conference Proceedings of the Society for Experimental Mechanics Series, 145-149
Mechanical behaviour of rapidly solidified copper: effects of undercooling and strain rate
Dragnevski K, Pellegrino A, Heard R, Siviour CR, Mullis AM et al. (2019), Materials Science and Technology, 36(2), 202-209
BibTeX
@article{mechanicalbehav-2019/11,
title={Mechanical behaviour of rapidly solidified copper: effects of undercooling and strain rate},
author={Dragnevski K, Pellegrino A, Heard R, Siviour CR, Mullis AM et al.},
journal={Materials Science and Technology},
volume={36},
pages={202-209},
publisher={Taylor and Francis},
year = "2019"
}
A thirteenth-century theory of speech
Harvey J, Smithson HE, Siviour CR, Gasper GEM, Sonnesyn SO et al. (2019), Journal of the Acoustical Society of America, 146(2), 937-947
BibTeX
@article{athirteenthcent-2019/8,
title={A thirteenth-century theory of speech},
author={Harvey J, Smithson HE, Siviour CR, Gasper GEM, Sonnesyn SO et al.},
journal={Journal of the Acoustical Society of America},
volume={146},
pages={937-947},
publisher={Acoustical Society of America},
year = "2019"
}
Fluoride-responsive debond on demand adhesives: manipulating polymer crystallinity and hydrogen bonding to optimise adhesion strength at low bonding temperatures
Babra TS, Wood M, Godleman JS, Salimi S, Warriner C et al. (2019), European Polymer Journal, 119, 260-271
BibTeX
@article{fluoriderespons-2019/7,
title={Fluoride-responsive debond on demand adhesives: manipulating polymer crystallinity and hydrogen bonding to optimise adhesion strength at low bonding temperatures},
author={Babra TS, Wood M, Godleman JS, Salimi S, Warriner C et al.},
journal={European Polymer Journal},
volume={119},
pages={260-271},
publisher={Elsevier},
year = "2019"
}
Novel microscopy‐based approaches to study the film formation mechanism and associated mechanical response in polymer lattices
Tkaczyk M, Dragnevski K, Siviour C & Edwards G (2019), Journal of Microscopy, 273(3), 163-168
BibTeX
@article{novelmicroscopy-2019/1,
title={Novel microscopy‐based approaches to study the film formation mechanism and associated mechanical response in polymer lattices},
author={Tkaczyk M, Dragnevski K, Siviour C & Edwards G},
journal={Journal of Microscopy},
volume={273},
pages={163-168},
publisher={Wiley},
year = "2019"
}
Predicting the high strain rate response of plasticised poly(vinyl chloride) using a fractional derivative model
Trivedi A & Siviour C (2018), EPJ Web of Conferences, 183
Framework for analyzing hyper-viscoelastic polymers
Trivedi A & Siviour C (2018), Shock Compression of Condensed Matter 2017, 1979(1)
Raw high-speed schlieren footage of acoustic waves in air for subsequent computational analysis and audio recovery
Harvey J, Smithson HE & Siviour CR (2018), Data in Brief, 19, 1647-1649
BibTeX
@article{rawhighspeedsch-2018/6,
title={Raw high-speed schlieren footage of acoustic waves in air for subsequent computational analysis and audio recovery},
author={Harvey J, Smithson HE & Siviour CR},
journal={Data in Brief},
volume={19},
pages={1647-1649},
publisher={Elsevier},
year = "2018"
}
Remote monitoring of vibrational information in spider webs
Mortimer B, Soler A, Siviour CR & Vollrath F (2018), Science of Nature, 105(5)
Visualization of acoustic waves in air and subsequent audio recovery with a high-speed schlieren imaging system: Experimental and computational development of a schlieren microphone
Harvey J, Smithson HE & Siviour CR (2018), Optics and Lasers in Engineering, 107, 182-193
BibTeX
@article{visualizationof-2018/4,
title={Visualization of acoustic waves in air and subsequent audio recovery with a high-speed schlieren imaging system: Experimental and computational development of a schlieren microphone},
author={Harvey J, Smithson HE & Siviour CR},
journal={Optics and Lasers in Engineering},
volume={107},
pages={182-193},
publisher={Elsevier},
year = "2018"
}
From spectra to perceptual color: Visualization tools for the dimensional reduction achieved by the human color sense
Harvey JS, Siviour CR & Smithson HE (2018), European Association for Computer Graphics - 39th Annual Conference, EUROGRAPHICS 2018 - Posters, 2018-January, 35-36
A dynamic supramolecular polyurethane network whose mechanical properties are kinetically controlled
Tang X, Feula A, Baker BC, Melia K, Merino DH et al. (2017), Polymer, 133, 143-150
BibTeX
@article{adynamicsupramo-2017/11,
title={A dynamic supramolecular polyurethane network whose mechanical properties are kinetically controlled},
author={Tang X, Feula A, Baker BC, Melia K, Merino DH et al.},
journal={Polymer},
volume={133},
pages={143-150},
publisher={Elsevier},
year = "2017"
}
Fluoride degradable and thermally debondable polyurethane based adhesive
Babra TS, Trivedi A, Warriner C, Bazin N, Castiglione D et al. (2017), Polymer Chemistry, 46(8), 7207-7216
BibTeX
@article{fluoridedegrada-2017/11,
title={Fluoride degradable and thermally debondable polyurethane based adhesive},
author={Babra TS, Trivedi A, Warriner C, Bazin N, Castiglione D et al.},
journal={Polymer Chemistry},
volume={46},
pages={7207-7216},
publisher={Royal Society of Chemistry},
year = "2017"
}
Bow-shaped caustics from conical prisms: a 13th-century account of rainbow formation from Robert Grosseteste’s De iride
Harvey J, Smithson HE, Siviour CR, Gasper GEM, Sønnesyn SO et al. (2017), Applied Optics, 56(19), G197-G204
BibTeX
@article{bowshapedcausti-2017/6,
title={Bow-shaped caustics from conical prisms: a 13th-century account of rainbow formation from Robert Grosseteste’s De iride},
author={Harvey J, Smithson HE, Siviour CR, Gasper GEM, Sønnesyn SO et al.},
journal={Applied Optics},
volume={56},
pages={G197-G204},
publisher={Optical Society of America},
year = "2017"
}
The incremental Virtual Fields Method and pre-stretching method applied to rubbers under uniaxial medium-strain-rate loading
Yoon S-H & Siviour C (2017), Strain, 53(3), e12225
On the mechanical behaviour of PEEK and HA cranial implants under impact loading
Garcia-Gonzalez D, Jayaratnam J, Sotiropoulos S, Yoon S-H, Cook J et al. (2017), Journal of the Mechanical Behavior of Biomedical Materials, 69, 342-354
BibTeX
@article{onthemechanical-2017/1,
title={On the mechanical behaviour of PEEK and HA cranial implants under impact loading},
author={Garcia-Gonzalez D, Jayaratnam J, Sotiropoulos S, Yoon S-H, Cook J et al.},
journal={Journal of the Mechanical Behavior of Biomedical Materials},
volume={69},
pages={342-354},
publisher={Elsevier},
year = "2017"
}
A framework for analyzing hyper-viscoelastic polymers
Trivedi AR & Siviour CR (2017), Constitutive Models for Rubber X - Proceedings of the 10th European Conference on Constitutive Models for Rubber, ECCMR X 2017, 529-535
Application of the Virtual Fields Method to rubbers under medium strain rate deformation using both acceleration and traction force data
Yoon S-H & Siviour C (2017), Journal of Dynamic Behavior of Materials, 3(1), 12-22
BibTeX
@article{applicationofth-2017/1,
title={Application of the Virtual Fields Method to rubbers under medium strain rate deformation using both acceleration and traction force data},
author={Yoon S-H & Siviour C},
journal={Journal of Dynamic Behavior of Materials},
volume={3},
pages={12-22},
publisher={Springer International Publishing},
year = "2017"
}
The Virtual Fields Method to Rubbers Under Medium Strain Rates
Yoon S-H & Siviour CR (2017), ADVANCEMENT OF OPTICAL METHODS IN EXPERIMENTAL MECHANICS, VOL 3, 177-185
Image-Based Inertial Impact Tests on an Aluminum Alloy
Dreuilhe S, Davis F, Siviour CR & Pierron F (2017), ADVANCEMENT OF OPTICAL METHODS IN EXPERIMENTAL MECHANICS, VOL 3, 219-223
Inertial Impact Tests on Polymers for Inverse Parameter Identification
Davis F, Pierron F & Siviour CR (2017), ADVANCEMENT OF OPTICAL METHODS IN EXPERIMENTAL MECHANICS, VOL 3, 187-190
A framework for analyzing hyper-viscoelastic polymers
Trivedi AR & Siviour CR (2017), CONSTITUTIVE MODELS FOR RUBBER X, 529-535
BibTeX
@inproceedings{aframeworkforan-2017/,
title={A framework for analyzing hyper-viscoelastic polymers},
author={Trivedi AR & Siviour CR},
pages={529-535},
year = "2017"
}
Tuning the instrument: sonic properties in the spider’s web
Siviour C, Mortimer B, Soler A, Zaera R & Vollrath F (2016), Journal of the Royal Society Interface, 13(122)
Application of the Virtual Fields Method to a relaxation behaviour of rubbers
Yoon S-H & Siviour C (2016), Journal of the Mechanics and Physics of Solids, 116, 416-431
A systematic study of the effect of the hard end-group composition on the microphase separation, thermal and mechanical properties of supramolecular polyurethanes
Merino DH, Feula A, Melia K, Slark AT, Giannakopoulos I et al. (2016), Polymer, 107, 368-378
BibTeX
@article{asystematicstud-2016/7,
title={A systematic study of the effect of the hard end-group composition on the microphase separation, thermal and mechanical properties of supramolecular polyurethanes},
author={Merino DH, Feula A, Melia K, Slark AT, Giannakopoulos I et al.},
journal={Polymer},
volume={107},
pages={368-378},
publisher={Elsevier},
year = "2016"
}
An adhesive elastomeric supramolecular polyurethane healable at body temperature.
Feula A, Tang X, Giannakopoulos I, Chippindale AM, Hamley IW et al. (2016), Chemical science, 7(7), 4291-4300
High Strain Rate Mechanics of Polymers: A Review
Siviour CR & Jordan JL (2016), Journal of Dynamic Behavior of Materials, 2(1), 15-32
Development of a high temperature flow stress model for AerMet 100 covering several orders of magnitude of strain rate
Shakib M, Perkins KM, Bray SE & Siviour CR (2016), MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING, 657, 26-32
BibTeX
@article{developmentofah-2016/3,
title={Development of a high temperature flow stress model for AerMet 100 covering several orders of magnitude of strain rate},
author={Shakib M, Perkins KM, Bray SE & Siviour CR},
journal={MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING},
volume={657},
pages={26-32},
year = "2016"
}
Dynamic Behavior of Low Impedance Materials
Jordan JL, Siviour CR & Song B (2016), Journal of Dynamic Behavior of Materials, 2(1)
High Strain-Rate Tensile Characterization of EPDM Rubber Using Non-equilibrium Loading and the Virtual Fields Method
Yoon S-H, Winters M & Siviour CR (2016), EXPERIMENTAL MECHANICS, 56(1), 25-35
Characterising the Effects of Strain Rate, Crystallographic Texture and Direction of Loading on the Mechanical Behaviour of Ti-6Al-4V
Wielewski E, Arthington MR, Siviour CR & Petrinic N (2015), Journal of Dynamic Behavior of Materials, 1(4), 462-471
BibTeX
@article{characterisingt-2015/12,
title={Characterising the Effects of Strain Rate, Crystallographic Texture and Direction of Loading on the Mechanical Behaviour of Ti-6Al-4V},
author={Wielewski E, Arthington MR, Siviour CR & Petrinic N},
journal={Journal of Dynamic Behavior of Materials},
volume={1},
pages={462-471},
year = "2015"
}
A Thermoreversible Supramolecular Polyurethane with Excellent Healing Ability at 45 degrees C
Feula A, Pethybridge A, Giannakopoulos I, Tang X, Chippindale A et al. (2015), MACROMOLECULES, 48(17), 6132-6141
Application of the Virtual Fields Method to the uniaxial behavior of rubbers at medium strain rates
Yoon S-H, Giannakopoulos I & Siviour CR (2015), INTERNATIONAL JOURNAL OF SOLIDS AND STRUCTURES, 69-70, 553-568
BibTeX
@article{applicationofth-2015/9,
title={Application of the Virtual Fields Method to the uniaxial behavior of rubbers at medium strain rates},
author={Yoon S-H, Giannakopoulos I & Siviour CR},
journal={INTERNATIONAL JOURNAL OF SOLIDS AND STRUCTURES},
volume={69-70},
pages={553-568},
year = "2015"
}
Experimentally Simulating High Rate Composite Deformation in Tension and Compression: Polymer Bonded Explosive Simulant
Kendall MJ & Siviour CR (2015), Journal of Dynamic Behavior of Materials, 1(2), 114-123
Identification of the Dynamic Properties of Al 5456 FSW Welds Using the Virtual Fields Method
Le Louëdec G, Pierron F, Sutton MA, Siviour C & Reynolds AP (2015), Journal of Dynamic Behavior of Materials, 1(2), 176-190
BibTeX
@article{identificationo-2015/6,
title={Identification of the Dynamic Properties of Al 5456 FSW Welds Using the Virtual Fields Method},
author={Le Louëdec G, Pierron F, Sutton MA, Siviour C & Reynolds AP},
journal={Journal of Dynamic Behavior of Materials},
volume={1},
pages={176-190},
year = "2015"
}
Latest Results in Novel Inertial High Strain Rate Tests
Zhu H, Pierron F & Siviour C (2015), Conference Proceedings of the Society for Experimental Mechanics Series, 65(VOLUME 1), 21-26
Internal Deformation Measurement of Polymer Bonded Sugar in Compression by Digital Volume Correlation of In-situ Tomography
Hu Z, Luo H, Bardenhagen SG, Siviour CR, Armstrong RW et al. (2015), EXPERIMENTAL MECHANICS, 55(1), 289-300
BibTeX
@article{internaldeforma-2015/1,
title={Internal Deformation Measurement of Polymer Bonded Sugar in Compression by Digital Volume Correlation of In-situ Tomography},
author={Hu Z, Luo H, Bardenhagen SG, Siviour CR, Armstrong RW et al.},
journal={EXPERIMENTAL MECHANICS},
volume={55},
pages={289-300},
year = "2015"
}
Effect of temperature and strain rate on the compressive behaviour of supramolecular polyurethane
Tang X, Siviour CR, Buckley CP, Feula A & Hayes W (2015), DYMAT 2015 - 11TH INTERNATIONAL CONFERENCE ON THE MECHANICAL AND PHYSICAL BEHAVIOUR OF MATERIALS UNDER DYNAMIC LOADING, 94
ULTRA-HIGH SPEED FULL-FIELD DEFORMATION MEASUREMENTS TO IDENTIFY THE HIGH STRAIN RATE BEHAVIOUR OF COMPOSITES
Zhu H, Pierron F & Siviour C (2015), 20TH INTERNATIONAL CONFERENCE ON COMPOSITE MATERIALS
BibTeX
@inproceedings{ultrahighspeedf-2015/,
title={ULTRA-HIGH SPEED FULL-FIELD DEFORMATION MEASUREMENTS TO IDENTIFY THE HIGH STRAIN RATE BEHAVIOUR OF COMPOSITES},
author={Zhu H, Pierron F & Siviour C},
year = "2015"
}
Strain rate dependency of laser sintered polyamide 12
Cook JET, Goodridge RD & Siviour CR (2015), DYMAT 2015 - 11TH INTERNATIONAL CONFERENCE ON THE MECHANICAL AND PHYSICAL BEHAVIOUR OF MATERIALS UNDER DYNAMIC LOADING, 94
Single rod impact tests: Analytical, experimental, and modelling investigation
Huang Y & Siviour CR (2015), DYMAT 2015 - 11TH INTERNATIONAL CONFERENCE ON THE MECHANICAL AND PHYSICAL BEHAVIOUR OF MATERIALS UNDER DYNAMIC LOADING, 94
Specimen Inertia in high strain rate tensile testing
Hockly M & Siviour CR (2015), DYMAT 2015 - 11TH INTERNATIONAL CONFERENCE ON THE MECHANICAL AND PHYSICAL BEHAVIOUR OF MATERIALS UNDER DYNAMIC LOADING, 94
The dynamic Virtual Fields Method on rubbers at medium and high strain rates
Yoon S-H & Siviour CR (2015), DYMAT 2015 - 11TH INTERNATIONAL CONFERENCE ON THE MECHANICAL AND PHYSICAL BEHAVIOUR OF MATERIALS UNDER DYNAMIC LOADING, 94
In Situ Environmental Scanning Electron Microscope Observations of Colloidal Failure Mechanisms Using the Brazilian Disk Test
Islam O, Dragnevski KI & Siviour CR (2015), EXPERIMENTAL TECHNIQUES, 39(6), 12-18
An ESEM/EDX Methodology for the Study of Additive Adsorption at the Polymer-Air Interface
Islam O, Siviour CR & Dragnevski KI (2015), 2ND INTERNATIONAL MULTIDISCIPLINARY MICROSCOPY AND MICROANALYSIS CONGRESS, 164, 145-151
Deformation behaviour of stainless steel microlattice structures by selective laser melting
Li P, Wang Z, Petrinic N & Siviour CR (2014), MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING, 614, 116-121
BibTeX
@article{deformationbeha-2014/9,
title={Deformation behaviour of stainless steel microlattice structures by selective laser melting},
author={Li P, Wang Z, Petrinic N & Siviour CR},
journal={MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING},
volume={614},
pages={116-121},
year = "2014"
}
The speed of sound in silk: linking material performance to biological function.
Mortimer B, Gordon SD, Holland C, Siviour CR, Vollrath F et al. (2014), Advanced materials (Deerfield Beach, Fla.), 26(30), 5179-5183
BibTeX
@article{thespeedofsound-2014/8,
title={The speed of sound in silk: linking material performance to biological function.},
author={Mortimer B, Gordon SD, Holland C, Siviour CR, Vollrath F et al.},
journal={Advanced materials (Deerfield Beach, Fla.)},
volume={26},
pages={5179-5183},
year = "2014"
}
The speed of sound in silk: Linking material performance to biological function
Mortimer B, Gordon SD, Holland C, Siviour CR, Vollrath F et al. (2014), Advanced Materials, 26(30), 5179-5183
Beyond Hopkinson's bar.
Pierron F, Zhu H & Siviour C (2014), Philosophical transactions. Series A, Mathematical, physical, and engineering sciences, 372(2023), 20130195
Rate dependence of poly(vinyl chloride), the effects of plasticizer and time-temperature superposition
Kendall MJ & Siviour CR (2014), PROCEEDINGS OF THE ROYAL SOCIETY A-MATHEMATICAL PHYSICAL AND ENGINEERING SCIENCES, 470(2167)
BibTeX
@article{ratedependenceo-2014/7,
title={Rate dependence of poly(vinyl chloride), the effects of plasticizer and time-temperature superposition},
author={Kendall MJ & Siviour CR},
journal={PROCEEDINGS OF THE ROYAL SOCIETY A-MATHEMATICAL PHYSICAL AND ENGINEERING SCIENCES},
volume={470},
number={ARTN 20140012},
year = "2014"
}
Stress gage system for measuring very soft materials under high rates of deformation
Kendall MJ, Drodge DR, Froud RF & Siviour CR (2014), MEASUREMENT SCIENCE AND TECHNOLOGY, 25(7)
Mechanics of particulate composites with glassy polymer binders in compression.
Jordan JL, Spowart JE, Kendall MJ, Woodworth B & Siviour CR (2014), Philosophical transactions. Series A, Mathematical, physical, and engineering sciences, 372(2015), 20130215
BibTeX
@article{mechanicsofpart-2014/5,
title={Mechanics of particulate composites with glassy polymer binders in compression.},
author={Jordan JL, Spowart JE, Kendall MJ, Woodworth B & Siviour CR},
journal={Philosophical transactions. Series A, Mathematical, physical, and engineering sciences},
volume={372},
pages={20130215},
year = "2014"
}
Experimentally simulating high-rate behaviour: rate and temperature effects in polycarbonate and PMMA.
Kendall MJ & Siviour CR (2014), Philosophical transactions. Series A, Mathematical, physical, and engineering sciences, 372(2015), 20130202
BibTeX
@article{experimentallys-2014/5,
title={Experimentally simulating high-rate behaviour: rate and temperature effects in polycarbonate and PMMA.},
author={Kendall MJ & Siviour CR},
journal={Philosophical transactions. Series A, Mathematical, physical, and engineering sciences},
volume={372},
pages={20130202},
year = "2014"
}
Novel temperature measurement method & thermodynamic investigations of amorphous polymers during high rate deformation
Kendall MJ, Froud RF & Siviour CR (2014), POLYMER, 55(10), 2514-2522
Hierarchical bionanomaterials under the hammer: High-rate response of silks
Drodge DR, Mortimer B, Siviour CR & Holland C (2014), Conference Proceedings of the Society for Experimental Mechanics Series, 4, 75-77
Strain rate and temperature dependence in PVC
Kendall MJ & Siviour CR (2014), Conference Proceedings of the Society for Experimental Mechanics Series, 1, 113-120
Multipurpose spider silks: the implications of web impact on vibration signalling
Mortimer B, Siviour CR, Holland C & Vollrath F (2014), INTEGRATIVE AND COMPARATIVE BIOLOGY, 54, E147-E147
BibTeX
@article{multipurposespi-2014/,
title={Multipurpose spider silks: the implications of web impact on vibration signalling},
author={Mortimer B, Siviour CR, Holland C & Vollrath F},
journal={INTEGRATIVE AND COMPARATIVE BIOLOGY},
volume={54},
pages={E147-E147},
year = "2014"
}
Strain rate-dependant mechanical properties of OFHC copper
Jordan JL, Siviour CR, Sunny G, Bramlette C & Spowart JE (2013), JOURNAL OF MATERIALS SCIENCE, 48(20), 7134-7141
The strain rate dependent material behavior of S-GFRP extracted from GLARE
Gerlach R, Siviour CR, Wiegand J & Petrinic N (2013), Mechanics of Advanced Materials and Structures, 20(7), 505-514
Experimentally simulating adiabatic conditions: Approximating high rate polymer behavior using low rate experiments with temperature profiles
Kendall MJ & Siviour CR (2013), POLYMER, 54(18), 5058-5063
In situ tensile tests of single silk fibres in an environmental scanning electron microscope (ESEM)
Mortimer B, Drodge DR, Dragnevski KI, Siviour CR & Holland C (2013), Journal of Materials Science, 48(14), 5055-5062
BibTeX
@article{insitutensilete-2013/7,
title={In situ tensile tests of single silk fibres in an environmental scanning electron microscope (ESEM)},
author={Mortimer B, Drodge DR, Dragnevski KI, Siviour CR & Holland C},
journal={Journal of Materials Science},
volume={48},
pages={5055-5062},
year = "2013"
}
Microstructure and x-ray microtomographic characterisation of deformation in electrodeposited nickel thin-walled hollow spheres
Li P, Petrinic N & Siviour CR (2013), Materials Letters, 100, 233-236
Compressive deformation of Rohacell foams: Effects of strain rate and temperature
Arezoo S, Tagarielli VL, Siviour CR & Petrinic N (2013), INTERNATIONAL JOURNAL OF IMPACT ENGINEERING, 51, 50-57
In situ tensile tests of single silk fibres in an environmental scanning electron microscope (ESEM)
Mortimer B, Drodge DR, Dragnevski KI, Siviour CR & Holland C (2013), Journal of Materials Science, 1-8
BibTeX
@article{insitutensilete-2013/,
title={In situ tensile tests of single silk fibres in an environmental scanning electron microscope (ESEM)},
author={Mortimer B, Drodge DR, Dragnevski KI, Siviour CR & Holland C},
journal={Journal of Materials Science},
pages={1-8},
year = "2013"
}
On some aspects of latex drying - ESEM observations
Islam O, Dragnevski KI & Siviour CR (2012), Progress in Organic Coatings, 75(4), 444-448
Dynamic behaviour of silks: Nature's precision nanocomposites
Drodge DR, Mortimer B, Siviour CR & Holland C (2012), EPJ Web of Conferences, 26
Probabilistic estimation of the constitutive parameters of polymers
Foley JR, Jordan JL & Siviour CR (2012), EPJ Web of Conferences, 26
High strain rate tensile and compressive effects in glassy polymers
Jordan JL, Siviour CR & Woodworth BT (2012), EPJ Web of Conferences, 26
Compression of polypropylene across a wide range of strain rates
Okereke MI, Buckley CP & Siviour CR (2012), MECHANICS OF TIME-DEPENDENT MATERIALS, 16(4), 361-379
Finite element modelling of the mechanism of deformation and failure in metallic thin-walled hollow spheres under dynamic compression
Li P, Petrinic N & Siviour CR (2012), Mechanics of Materials, 54, 43-54
BibTeX
@article{finiteelementmo-2012/11,
title={Finite element modelling of the mechanism of deformation and failure in metallic thin-walled hollow spheres under dynamic compression},
author={Li P, Petrinic N & Siviour CR},
journal={Mechanics of Materials},
volume={54},
pages={43-54},
year = "2012"
}
Ballistic impact to access the high-rate behaviour of individual silk fibres
Drodge DR, Mortimer B, Holland C & Siviour CR (2012), Journal of the Mechanics and Physics of Solids, 60(10), 1710-1721
The influence of microstructure on the shock and spall behaviour of the magnesium alloy, Elektron 675
Hazell PJ, Appleby-Thomas GJ, Wielewski E, Stennett C & Siviour C (2012), ACTA MATERIALIA, 60(17), 6042-6050
BibTeX
@article{theinfluenceofm-2012/10,
title={The influence of microstructure on the shock and spall behaviour of the magnesium alloy, Elektron 675},
author={Hazell PJ, Appleby-Thomas GJ, Wielewski E, Stennett C & Siviour C},
journal={ACTA MATERIALIA},
volume={60},
pages={6042-6050},
year = "2012"
}
Improved materials characterisation through the application of geometry reconstruction to quasi-static and high-strain-rate tension tests
Arthington MR, Siviour CR & Petrinic N (2012), International Journal of Impact Engineering, 46, 86-96
BibTeX
@article{improvedmateria-2012/8,
title={Improved materials characterisation through the application of geometry reconstruction to quasi-static and high-strain-rate tension tests},
author={Arthington MR, Siviour CR & Petrinic N},
journal={International Journal of Impact Engineering},
volume={46},
pages={86-96},
year = "2012"
}
On the correlation between macrozones and twinning in Ti-6Al-4V at very high strain rates
Wielewski E, Siviour CR & Petrinic N (2012), SCRIPTA MATERIALIA, 67(3), 229-232
In-plane and through-thickness properties, failure modes, damage and delamination in 3D woven carbon fibre composites subjected to impact loading
Gerlach R, Siviour CR, Wiegand J & Petrinic N (2012), Composites Science and Technology, 72(3), 397-411
BibTeX
@article{inplaneandthrou-2012/2,
title={In-plane and through-thickness properties, failure modes, damage and delamination in 3D woven carbon fibre composites subjected to impact loading},
author={Gerlach R, Siviour CR, Wiegand J & Petrinic N},
journal={Composites Science and Technology},
volume={72},
pages={397-411},
year = "2012"
}
Compression of polypropylene across a wide range of strain rates
Okereke MI, Buckley CP & Siviour CR (2012), Mechanics of Time-Dependent Materials, 1-19
BibTeX
@article{compressionofpo-2012/,
title={Compression of polypropylene across a wide range of strain rates},
author={Okereke MI, Buckley CP & Siviour CR},
journal={Mechanics of Time-Dependent Materials},
pages={1-19},
year = "2012"
}
Ballistic impact to access the high-rate behaviour of individual silk fibres
Drodge DR, Mortimer B, Holland C & Siviour CR (2012), Journal of the Mechanics and Physics of Solids
BibTeX
@article{ballisticimpact-2012/,
title={Ballistic impact to access the high-rate behaviour of individual silk fibres},
author={Drodge DR, Mortimer B, Holland C & Siviour CR},
journal={Journal of the Mechanics and Physics of Solids},
year = "2012"
}
HIGH STRAIN RATE TENSILE TESTING OF COMPOSITES USING ULTRA HIGH SPEED IMAGING
Pierron F & Siviour C (2012), ICEM15: 15TH INTERNATIONAL CONFERENCE ON EXPERIMENTAL MECHANICS
BibTeX
@inproceedings{highstrainratet-2012/,
title={HIGH STRAIN RATE TENSILE TESTING OF COMPOSITES USING ULTRA HIGH SPEED IMAGING},
author={Pierron F & Siviour C},
year = "2012"
}
ELECTRON BACKSCATTER DIFFRACTION OF A PRE AND POST-DEFORMATION Ti-6Al-4V TAYLOR IMPACT SPECIMEN
Wielewski E, Eggleston J, Siviour CR & Petrinic N (2012), SHOCK COMPRESSION OF CONDENSED MATTER - 2011, PTS 1 AND 2, 1426
ON THE SHOCK RESPONSE OF THE MAGNESIUM ALLOY ELEKTRON 675
Hazell PJ, Appleby-Thomas GJ, Wielewski E, Siviour C & Stennett C (2012), SHOCK COMPRESSION OF CONDENSED MATTER - 2011, PTS 1 AND 2, 1426
INCREASING DATA FROM HIGH RATE CHARACTERIZATION EXPERIMENTS USING OPTICAL RECONSTRUCTION
Siviour CR, Arthington MR, Wielewski EJ & Petrinic N (2012), SHOCK COMPRESSION OF CONDENSED MATTER - 2011, PTS 1 AND 2, 1426
HIGH STRAIN RATE MECHANICAL PROPERTIES OF GLASSY POLYMERS
Jordan JL, Siviour CR & Woodworth BT (2012), SHOCK COMPRESSION OF CONDENSED MATTER - 2011, PTS 1 AND 2, 1426
On some aspects of latex drying - ESEM observations
Islam O, Dragnevski KI & Siviour CR (2012), Progress in Organic Coatings
BibTeX
@article{onsomeaspectsof-2012/,
title={On some aspects of latex drying - ESEM observations},
author={Islam O, Dragnevski KI & Siviour CR},
journal={Progress in Organic Coatings},
year = "2012"
}
Digital volume correlation applied to compaction of granular materials
Sjodahl M, Siviour CR & Forsberg F (2012), IUTAM SYMPOSIUM ON FULL-FIELD MEASUREMENTS AND IDENTIFICATION IN SOLID MECHANICS, 2011, 4, 179-195
A novel method for pulse shaping of Split Hopkinson tensile bar signals
Gerlach R, Sathianathan SK, Siviour C & Petrinic N (2011), INTERNATIONAL JOURNAL OF IMPACT ENGINEERING, 38(12), 976-980
Quantification of impact energy dissipation capacity in metallic thin-walled hollow sphere foams using high speed photography
Li P, Petrinic N & Siviour CR (2011), Journal of Applied Physics, 110(8)
Optical surface profile tracking for high-resolution strain measurement
Arthington MR, Siviour CR, Petrinic N & Elliott BCF (2011), Measurement Science and Technology, 22(2)
IMPACT BEHAVIOUR AND ENERGY DISSIPATION IN METALLIC THIN-WALLED HOLLOW SPHERES
Li P, Petrinic N & Siviour CR (2011), ADVANCES IN HETEROGENEOUS MATERIAL MECHANICS 2011, 270-+
BibTeX
@inproceedings{impactbehaviour-2011/,
title={IMPACT BEHAVIOUR AND ENERGY DISSIPATION IN METALLIC THIN-WALLED HOLLOW SPHERES},
author={Li P, Petrinic N & Siviour CR},
pages={270-+},
year = "2011"
}
A method for the in situ measurement of evolving elliptical cross-sections in initially cylindrical Taylor impact specimens
Wielewski E, Arthington MR, Siviour CR, Carter S, Hofmann F et al. (2010), Journal of Strain Analysis for Engineering Design, 45(6), 429-437
BibTeX
@article{amethodforthein-2010/8,
title={A method for the in situ measurement of evolving elliptical cross-sections in initially cylindrical Taylor impact specimens},
author={Wielewski E, Arthington MR, Siviour CR, Carter S, Hofmann F et al.},
journal={Journal of Strain Analysis for Engineering Design},
volume={45},
pages={429-437},
year = "2010"
}
High-rate mechanical properties of energetic materials
Walley SM, Siviour CR, Drodge DR & Williamson DM (2010), JOM, 62(1), 31-34
SPECIAL ISSUE ON HIGH STRAIN RATE AND IMPACT LOADING
Siviour CR (2010), JOURNAL OF STRAIN ANALYSIS FOR ENGINEERING DESIGN, 45(6), I-II
Novel measurements of material properties at high rates of strain using speckle metrology
Siviour CR, Grantham SG, Williamson DM, Proud WG & Field JE (2009), IMAGING SCIENCE JOURNAL, 57(6), 326-332
High resolution optical measurements of specimen deformation in the split Hopkinson pressure bar
Siviour CR & Grantham SG (2009), IMAGING SCIENCE JOURNAL, 57(6), 333-343
3D deformation and strain analysis in compacted sugar using x-ray microtomography and digital volume correlation
Forsberg F & Siviour CR (2009), MEASUREMENT SCIENCE AND TECHNOLOGY, 20(9)
The interface between matrix pockets and fibre bundles under impact loading
Gerlach R, Pabst A, Petrinic N, Hornig A, Wiegand J et al. (2009), Composites Science and Technology, 69(11-12), 2024-2026
Strain rate dependent compressive properties of glass microballoon epoxy syntactic foams
Li P, Petrinic N, Siviour CR, Froud R & Reed JM (2009), Materials Science and Engineering A, 515(1-2), 19-25
The effect of strain rate, specimen geometry and lubrication on responses of aluminium AA2024 in uniaxial compression experiments
Li P, Siviour CR & Petrinic N (2009), Experimental Mechanics, 49(4), 587-593
A measurement of wave propagation in the split Hopkinson pressure bar
Siviour CR (2009), MEASUREMENT SCIENCE AND TECHNOLOGY, 20(6)
Cross-section reconstruction during uniaxial loading
Arthington MR, Siviour CR, Petrinic N & Elliott BCF (2009), Measurement Science and Technology, 20(7)
Strain rate dependence of a super-elastic NiTi alloy
Siviour CR, Huber JE, Normanton T, Petrinic N & EDPS (2009), DYMAT 2009: 9TH INTERNATIONAL CONFERENCE ON THE MECHANICAL AND PHYSICAL BEHAVIOUR OF MATERIALS UNDER DYNAMIC LOADING, VOL 2, 1153-1159
Taylor impact experiments on Ti-6Al-4V specimens using 3D geometry reconstruction and instrumented target rods
Wielewski E, Siviour CR, Petrinic N, Arthington MR, Carter S et al. (2009), DYMAT 2009: 9TH INTERNATIONAL CONFERENCE ON THE MECHANICAL AND PHYSICAL BEHAVIOUR OF MATERIALS UNDER DYNAMIC LOADING, VOL 1, 257-263
Experimental characterisation of the strain rate dependent failure and damage behaviour of 3D composites
Gerlach R, Siviour CR, Petrinic N, Wiegand J & EDPS (2009), DYMAT 2009: 9TH INTERNATIONAL CONFERENCE ON THE MECHANICAL AND PHYSICAL BEHAVIOUR OF MATERIALS UNDER DYNAMIC LOADING, VOL 1, 219-225
Strain rate dependence of Ti64: Characterisation of mechanical properties up to failure using novel optical techniques
Arthington M, Siviour C, Petrinic N, Elliott B & EDPS (2009), DYMAT 2009: 9TH INTERNATIONAL CONFERENCE ON THE MECHANICAL AND PHYSICAL BEHAVIOUR OF MATERIALS UNDER DYNAMIC LOADING, VOL 1, 193-199
TEXTURE DEPENDENCY OF HIGH STRAIN RATE PROPERTIES OF Ti-6Al-4V
Wielewski E, Siviour CR & Petrinic N (2009), SHOCK COMPRESSION OF CONDENSED MATTER - 2009, PTS 1 AND 2, 1195, 1109-1112
High strain rate compressive behaviour of a Silicone elastomer
Siviour CR, Proud WG, Salisbury DA & Winter RE (2008), Society for Experimental Mechanics - 11th International Congress and Exhibition on Experimental and Applied Mechanics 2008, 1, 407-413
BibTeX
@inproceedings{highstrainratec-2008/12,
title={High strain rate compressive behaviour of a Silicone elastomer},
author={Siviour CR, Proud WG, Salisbury DA & Winter RE},
pages={407-413},
year = "2008"
}
Mechanical properties of Epon 826/DEA epoxy
Jordan JL, Foley JR & Siviour CR (2008), MECHANICS OF TIME-DEPENDENT MATERIALS, 12(3), 249-272
Experimental characterisation and constitutive modelling of RTM-6 resin under impact loading
Gerlach R, Siviour CR, Petrinic N & Wiegand J (2008), Polymer, 49(11), 2728-2737
High strain rate properties of a polymer-bonded sugar: Their dependence on applied and internal constraints
Siviour CR, Laity PR, Proud WG, Field JE, Porter D et al. (2008), Proceedings of the Royal Society A: Mathematical, Physical and Engineering Sciences, 464(2093), 1229-1255
BibTeX
@article{highstrainratep-2008/5,
title={High strain rate properties of a polymer-bonded sugar: Their dependence on applied and internal constraints},
author={Siviour CR, Laity PR, Proud WG, Field JE, Porter D et al.},
journal={Proceedings of the Royal Society A: Mathematical, Physical and Engineering Sciences},
volume={464},
pages={1229-1255},
year = "2008"
}
Temperature-time response of a polymer bonded explosive in compression (EDC37)
Williamson DM, Siviour CR, Proud WG, Palmer SJP, Govier R et al. (2008), JOURNAL OF PHYSICS D-APPLIED PHYSICS, 41(8)
BibTeX
@article{temperaturetime-2008/4,
title={Temperature-time response of a polymer bonded explosive in compression (EDC37)},
author={Williamson DM, Siviour CR, Proud WG, Palmer SJP, Govier R et al.},
journal={JOURNAL OF PHYSICS D-APPLIED PHYSICS},
volume={41},
number={ARTN 085404},
year = "2008"
}
An error analysis into the use of regular targets and target detection in image analysis for impact engineering
Jumpasut A, Petrinic N, Elliott BCF, Siviour CR & Arthington MR (2008), Applied Mechanics and Materials, 13-14, 203-210
Comparison of Porter-Gould constitutive model with compression test data for HTPB/SUGAR
Cornish R, Porter D, Church P, Gould P, Andrews T et al. (2007), AIP Conference Proceedings, 955, 777-780
Rate dependent strengths of some solder joints
Williamson DM, Field JE, Palmer SJP & Siviour CR (2007), JOURNAL OF PHYSICS D-APPLIED PHYSICS, 40(15), 4691-4700
Compressive properties of extruded polytetrafluoroethylene
Jordan JL, Siviour CR, Foley JR & Brown EN (2007), POLYMER, 48(14), 4184-4195
Damage formation during high strain rate deformation of PBS9501
Siviour CR & Proud WG (2007), SHOCK COMPRESSION OF CONDENSED MATTER - 2007, PTS 1 AND 2, 955, 799-+
BibTeX
@inproceedings{damageformation-2007/,
title={Damage formation during high strain rate deformation of PBS9501},
author={Siviour CR & Proud WG},
pages={799-+},
year = "2007"
}
An integrated experimental-numerical method for characterisation of materials at high strain rates
Elliott BCF, Wiegand J, Siviour CR, Sarsfield H & Petrinic N (2007), SHOCK COMPRESSION OF CONDENSED MATTER - 2007, PTS 1 AND 2, 955, 645-648
BibTeX
@inproceedings{anintegratedexp-2007/,
title={An integrated experimental-numerical method for characterisation of materials at high strain rates},
author={Elliott BCF, Wiegand J, Siviour CR, Sarsfield H & Petrinic N},
pages={645-648},
year = "2007"
}
Experimental techniques to numerical analyses: The missing link in inverse modelling
Lakshmi SS, Siviour CR, Petrinic N & Elliott BCF (2006), Proceedings of the 2006 SEM Annual Conference and Exposition on Experimental and Applied Mechanics 2006, 3, 1443-1453
BibTeX
@inproceedings{experimentaltec-2006/10,
title={Experimental techniques to numerical analyses: The missing link in inverse modelling},
author={Lakshmi SS, Siviour CR, Petrinic N & Elliott BCF},
pages={1443-1453},
year = "2006"
}
Mechanical behaviour of polymers at high rates of strain
Siviour CR, Walley SM, Proud WG & Field JE (2006), JOURNAL DE PHYSIQUE IV, 134, 949-955
Improved predictive modelling of strain localisation and ductile fracture in a Ti-6Al-4V alloy subjected to impact loading
Petrinic N, Sosa JLC, Siviour CR & Elliott BCF (2006), JOURNAL DE PHYSIQUE IV, 134, 147-155
Characterising the response of energetic materials and polymer-bonded explosives (PBXs) to high-rate loading
Proud WG, Greenaway MW, Siviour CR, Czerski H, Field JE et al. (2006), MULTIFUNCTIONAL ENERGETIC MATERIALS, 896, 225-+
BibTeX
@inproceedings{characterisingt-2006/,
title={Characterising the response of energetic materials and polymer-bonded explosives (PBXs) to high-rate loading},
author={Proud WG, Greenaway MW, Siviour CR, Czerski H, Field JE et al.},
pages={225-+},
year = "2006"
}
High strain rate characterisation of a polymer bonded sugar
Laity PR, Siviour CR, Church PD & Proud WG (2006), Shock Compression of Condensed Matter - 2005, Pts 1 and 2, 845, 905-908
BibTeX
@inproceedings{highstrainratec-2006/,
title={High strain rate characterisation of a polymer bonded sugar},
author={Laity PR, Siviour CR, Church PD & Proud WG},
pages={905-908},
year = "2006"
}
Measurements of strain propagation in Hopkinson bar specimens
Siviour CR & Proud WG (2006), Shock Compression of Condensed Matter - 2005, Pts 1 and 2, 845, 1293-1296
BibTeX
@inproceedings{measurementsofs-2006/,
title={Measurements of strain propagation in Hopkinson bar specimens},
author={Siviour CR & Proud WG},
pages={1293-1296},
year = "2006"
}
Particle size effects on mechanical properties of particulate composites
Jordan JL, Siviour CR, Richards DW, Rumchik CG & Dick RD (2005), Proceedings of the 2005 SEM Annual Conference and Exposition on Experimental and Applied Mechanics, 81-90
BibTeX
@inproceedings{particlesizeeff-2005/12,
title={Particle size effects on mechanical properties of particulate composites},
author={Jordan JL, Siviour CR, Richards DW, Rumchik CG & Dick RD},
pages={81-90},
year = "2005"
}
The high strain rate compressive behaviour of polycarbonate and polyvinylidene difluoride
Siviour CR, Walley SM, Proud WG & Field JE (2005), POLYMER, 46(26), 12546-12555
Mechanical properties of SnPb and lead-free solders at high rates of strain
Siviour CR, Walley SM, Proud WG & Field JE (2005), JOURNAL OF PHYSICS D-APPLIED PHYSICS, 38(22), 4131-4139
Lubrication of polycarbonate at cryogenic temperatures in the split Hopkinson pressure bar
Trautmann A, Siviour CR, Walley SM & Field JE (2005), INTERNATIONAL JOURNAL OF IMPACT ENGINEERING, 31(5), 523-544
High-strain rate Brazilian testing of an explosive simulant using speckle metrology
Grantham SG, Siviour CR, Proud WG & Field JE (2004), MEASUREMENT SCIENCE AND TECHNOLOGY, 15(9), 1867-1870
BibTeX
@article{highstrainrateb-2004/9,
title={High-strain rate Brazilian testing of an explosive simulant using speckle metrology},
author={Grantham SG, Siviour CR, Proud WG & Field JE},
journal={MEASUREMENT SCIENCE AND TECHNOLOGY},
volume={15},
number={PII S0957-0233(04)78735-4},
pages={1867-1870},
year = "2004"
}
Review of experimental techniques for high rate deformation and shock studies
Field JE, Walley SM, Proud WG, Goldrein HT & Siviour CR (2004), INTERNATIONAL JOURNAL OF IMPACT ENGINEERING, 30(7), 725-775
Behaviour of ammonium perchlorate-based propellants and a polymer-bonded explosive under impact loading
Balzer JE, Siviour CR, Walley SM, Proud WG & Field JE (2004), PROCEEDINGS OF THE ROYAL SOCIETY A-MATHEMATICAL PHYSICAL AND ENGINEERING SCIENCES, 460(2043), 781-806
BibTeX
@article{behaviourofammo-2004/3,
title={Behaviour of ammonium perchlorate-based propellants and a polymer-bonded explosive under impact loading},
author={Balzer JE, Siviour CR, Walley SM, Proud WG & Field JE},
journal={PROCEEDINGS OF THE ROYAL SOCIETY A-MATHEMATICAL PHYSICAL AND ENGINEERING SCIENCES},
volume={460},
pages={781-806},
year = "2004"
}
Particle size effects on the mechanical properties of a polymer bonded explosive
Siviour CR, Gifford MJ, Walley SM, Proud WG & Field JE (2004), JOURNAL OF MATERIALS SCIENCE, 39(4), 1255-1258
Split Hopkinson bar measurements of PBXS
Siviour CR, Williamson DM, Grantham SG, Palmer SJP, Proud WG et al. (2004), SHOCK COMPRESSION OF CONDENSED MATTER - 2003, PTS 1 AND 2, PROCEEDINGS, 706, 804-807
BibTeX
@inproceedings{splithopkinsonb-2004/,
title={Split Hopkinson bar measurements of PBXS},
author={Siviour CR, Williamson DM, Grantham SG, Palmer SJP, Proud WG et al.},
pages={804-807},
year = "2004"
}
The shock initiation and high strain rate mechanical characterization of ultrafine energetic powders and compositions
Field JE, Walley SM, Proud WG, Balzer JE, Gifford MJ et al. (2004), SYNTHESIS, CHARACTERIZATION AND PROPERTIES OF ENERGETIC/REACTIVE NANOMATERIALS, 800, 179-190
BibTeX
@inproceedings{theshockinitiat-2004/,
title={The shock initiation and high strain rate mechanical characterization of ultrafine energetic powders and compositions},
author={Field JE, Walley SM, Proud WG, Balzer JE, Gifford MJ et al.},
pages={179-190},
year = "2004"
}
Dynamic properties of solders and solder joints
Siviour CR, Williamson DM, Palmer SJP, Walley SM, Proud WG et al. (2003), JOURNAL DE PHYSIQUE IV, 110, 477-482
Speckle measurements of sample deformation in the split Hopkinsons pressure bar
Grantham SG, Siviour CR, Proud WG, Walley SM & Field JE (2003), JOURNAL DE PHYSIQUE IV, 110, 405-410
Experimental characterisation and modelling of the strain rate dependent mechanical response of a filled thermo-reversible supramolecular polyurethane
Chen H, Hart L, Siviour C & Hayes W (0), International Journal of Impact Engineering
BibTeX
@article{experimentalcha-/,
title={Experimental characterisation and modelling of the strain rate dependent mechanical response of a filled thermo-reversible supramolecular polyurethane},
author={Chen H, Hart L, Siviour C & Hayes W},
journal={International Journal of Impact Engineering},
publisher={Elsevier}
}
Characterization and modelling of bisphenol-a type epoxy polymer over a wide range of rates and temperatures
Chen H, Song P, Commins T, Graham A, Trivedi A et al. (0), Polymer
BibTeX
@article{characterizatio-/,
title={Characterization and modelling of bisphenol-a type epoxy polymer over a wide range of rates and temperatures},
author={Chen H, Song P, Commins T, Graham A, Trivedi A et al.},
journal={Polymer},
publisher={Elsevier}
}
Optimising Dynamic Mechanical Analysis experiments on soft rubbers for use in Time Temperature Superposition.
Trivedi A, Hawkins N & Siviour C (0), MethodsX
BibTeX
@article{optimisingdynam-/,
title={Optimising Dynamic Mechanical Analysis experiments on soft rubbers for use in Time Temperature Superposition.},
author={Trivedi A, Hawkins N & Siviour C},
journal={MethodsX},
publisher={Elsevier}
}
Tensile testing of polymers: integration of digital image correlation, infrared thermography and finite element modelling
Song P, Trivedi A & Siviour C (0), Journal of the Mechanics and Physics of Solids
BibTeX
@article{tensiletestingo-/,
title={Tensile testing of polymers: integration of digital image correlation, infrared thermography and finite element modelling},
author={Song P, Trivedi A & Siviour C},
journal={Journal of the Mechanics and Physics of Solids},
publisher={Elsevier}
}
Experimentally characterising the temperature and rate dependent behaviour of unfilled, and glass microsphere filled, natural rubber
Trivedi A, Whybrow R, Muhr A & Siviour C (0), Polymer
BibTeX
@article{experimentallyc-/,
title={Experimentally characterising the temperature and rate dependent behaviour of unfilled, and glass microsphere filled, natural rubber},
author={Trivedi A, Whybrow R, Muhr A & Siviour C},
journal={Polymer},
publisher={Elsevier}
}