Publications

BibTeX

@article{acriticalcompar-2022/7,
  title={A critical comparative review of cavitation peening and other surface peening methods},
  author={Soyama H & Korsunsky AM},
  journal={Journal of Materials Processing Technology},
  volume={305},
  year = "2022"
}

BibTeX

@article{multiscalestres-2022/5,
  title={Multiscale stress and strain statistics in the deformation of polycrystalline alloys},
  author={Chen J, Wang Z & Korsunsky AM},
  journal={International Journal of Plasticity},
  volume={152},
  year = "2022"
}

BibTeX

@article{ultrafastquanti-2022/4,
  title={Ultra-fast quantification of polycrystalline texture via single shot synchrotron X-ray or neutron diffraction},
  author={Wang Z, Chen J, Magdysyuk OV, Uzun F & Korsunsky AM},
  journal={Materials Characterization},
  volume={186},
  year = "2022"
}

BibTeX

@article{asersplatformba-2022/4,
  title={A SERS platform based on diatomite modified by gold nanoparticles using a combination of layer-by-layer assembly and a freezing-induced loading method.},
  author={Cvjetinovic J, Merdalimova AA, Kirsanova MA, Somov PA, Nozdriukhin DV et al.},
  journal={Physical chemistry chemical physics : PCCP},
  volume={24},
  pages={8901-8912},
  year = "2022"
}

BibTeX

@article{thefundamentalf-2022/4,
  title={The Fundamental Formulation for Inhomogeneous Inclusion Problems with the Equivalent Eigenstrain Principle},
  author={Ma L & Korsunsky AM},
  journal={METALS},
  volume={12},
  number={ARTN 582},
  year = "2022"
}

BibTeX

@article{recoveringthese-2022/4,
  title={Recovering the second moment of the strain distribution from neutron Bragg edge data},
  author={Fogarty K, Ametova E, Burca G, Korsunsky AM, Schmidt S et al.},
  journal={Applied Physics Letters},
  volume={120},
  year = "2022"
}

BibTeX

@article{increasedconnec-2022/3,
  title={Increased connectivity of hiPSC-derived neural networks in multiphase granular hydrogel scaffolds.},
  author={Hsu C-C, George JH, Waller S, Besnard C, Nagel DA et al.},
  journal={Bioactive materials},
  volume={9},
  pages={358-372},
  year = "2022"
}

BibTeX

@article{improvingultraf-2022/3,
  title={Improving ultra-fast charging performance and durability of all solid state thin film Li-NMC battery-on-chip systems by in situ TEM lamella analysis},
  author={Brandt LR, Nishio K, Salvati E, Simon KP, Papadaki C et al.},
  journal={APPLIED MATERIALS TODAY},
  volume={26},
  number={ARTN 101282},
  year = "2022"
}

BibTeX

@article{effectofgraphen-2022/3,
  title={Effect of Graphene Oxide and Nanosilica Modifications on Electrospun Core-Shell PVA-PEG-SiO2@PVA-GO Fiber Mats.},
  author={Kan Y, Bondareva JV, Statnik ES, Cvjetinovic J, Lipovskikh S et al.},
  journal={Nanomaterials (Basel)},
  volume={12},
  year = "2022"
}

BibTeX

@inproceedings{photonictoolsfo-2022/3,
  title={Photonic tools for evaluating the growth of diatom colonies during long-term batch cultivation},
  author={Cvjetinovic J, Bedoshvili YD, Nozdriukhin DV, Salimon AI, Korsunsky AM et al.},
  year = "2022"
}

BibTeX

@misc{plasticintheaqu-2022/1,
  title={Plastic in the Aquatic Environment: Interactions with Microorganisms},
  author={Sapozhnikov P, Salimon A, Korsunsky AM, Kalinina O, Ilyina O et al.},
  year = "2022"
}

BibTeX

@article{dlocalatomicstr-2022/1,
  title={3D local atomic structure evolution in a solidifying Al-0.4Sc dilute alloy melt revealed in operando by synchrotron X-ray total scattering and modelling},
  author={Huang S, Luo S, Qin L, Shu D, Sun B et al.},
  journal={Scripta Materialia},
  year = "2022"
}

BibTeX

@article{empiricalimplem-2022/1,
  title={Empirical Implementation of the Steinmetz Equation to Compute Eddy Current Loss in Soft Magnetic Composite Components},
  author={Kulan MC, Baker NJ, Liogas KA, Davis O, Taylor J et al.},
  journal={IEEE Access},
  volume={10},
  pages={14610-14623},
  year = "2022"
}

BibTeX

@article{onthereinforced-2021/12,
  title={On the reinforced polymer composites with optimised strength and fire resistance - In Memory of Arthur Geoffrey Gibson},
  author={Korsunsky AM, Lunt AJG & Dulieu-Barton J},
  journal={MATERIALS & DESIGN},
  volume={212},
  number={ARTN 110244},
  year = "2021"
}

BibTeX

@article{comparativemult-2021/12,
  title={Comparative Multi-Modal, Multi-Scale Residual Stress Evaluation in SLM 3D-Printed Al-Si-Mg Alloy (RS-300) Parts},
  author={Statnik ES, Uzun F, Lipovskikh SA, Kan YV, Eleonsky SI et al.},
  journal={METALS},
  volume={11},
  number={ARTN 2064},
  year = "2021"
}

BibTeX

@inproceedings{assessmentofdia-2021/9,
  title={Assessment of diatom growth using fluorescence imaging},
  author={Cvjetinovic J, Nozdriukhin DV, Bedoshvili YD, Salimon AI, Korsunsky AM et al.},
  year = "2021"
}

BibTeX

@article{onthediatomiteb-2021/9,
  title={On the diatomite-based nanostructure-preserving material synthesis for energy applications},
  author={Aggrey P, Nartey M, Kan Y, Cvjetinovic J, Andrews A et al.},
  journal={RSC ADVANCES},
  volume={11},
  pages={31884-31922},
  year = "2021"
}

BibTeX

@article{analysisofinvit-2021/8,
  title={Analysis of in vitro demineralised human enamel using multi-scale correlative optical and scanning electron microscopy, and high-resolution synchrotron wide-angle X-ray scattering},
  author={Besnard C, Harper RA, Salvati E, Moxham TEJ, Brandt LR et al.},
  journal={MATERIALS & DESIGN},
  volume={206},
  number={ARTN 109739},
  year = "2021"
}

BibTeX

@article{onthegrainmicro-2021/8,
  title={On the Grain Microstructure-Mechanical Properties Relationships in Aluminium Alloy Parts Fabricated by Laser Powder Bed Fusion},
  author={Somov PA, Statnik ES, Malakhova YV, Nyaza KV, Salimon AI et al.},
  journal={METALS},
  volume={11},
  number={ARTN 1175},
  year = "2021"
}

BibTeX

@article{combinationofme-2021/8,
  title={Combination of Metal Oxide and Polytriarylamine: A Design Principle to Improve the Stability of Perovskite Solar Cells},
  author={Tepliakova MM, Mikheeva AN, Somov PA, Statnik ES, Korsunsky AM et al.},
  journal={ENERGIES},
  volume={14},
  number={ARTN 5115},
  year = "2021"
}

BibTeX

@article{ontheselectiona-2021/6,
  title={On the selection and design of powder materials for laser additive manufacturing},
  author={Donate-Buendia C, Gu D, Schmidt M, Barcikowski S, Korsunsky AM et al.},
  journal={MATERIALS & DESIGN},
  volume={204},
  number={ARTN 109653},
  year = "2021"
}

BibTeX

@article{danalysisofenam-2021/6,
  title={3D analysis of enamel demineralisation in human dental caries using high-resolution, large field of view synchrotron X-ray micro-computed tomography},
  author={Besnard C, Harper RA, Moxham TEJ, James JD, Storm M et al.},
  journal={MATERIALS TODAY COMMUNICATIONS},
  volume={27},
  number={ARTN 102418},
  year = "2021"
}

BibTeX

@article{onthestructural-2021/4,
  title={On the Structural Peculiarities of Self-Reinforced Composite Materials Based on UHMWPE Fibers.},
  author={Zherebtsov D, Chukov D, Royaud I, Ponçot M, Larin I et al.},
  journal={Polymers},
  volume={13},
  year = "2021"
}

BibTeX

@article{aberrationchara-2021/3,
  title={Aberration characterization of x-ray optics using multi-modal ptychography and a partially coherent source},
  author={Moxham TEJ, Laundy D, Dhamgaye V, Fox OJL, Sawhney K et al.},
  journal={APPLIED PHYSICS LETTERS},
  volume={118},
  number={ARTN 104104},
  year = "2021"
}

@misc{onthehillandkol-2021/3,
  title={On the Hill and Kolmogorov statistics and the K-function representation
  of judiciously modified Avrami kinetics},
  author={Korsunsky AM},
  year = "2021"
}

BibTeX

@article{stressassistedt-2021/2,
  title={Stress-Assisted Thermal Diffusion Barrier Breakdown in Ion Beam Deposited Cu/W Nano-Multilayers on Si Substrate Observed by <i>in Situ</i> GISAXS and Transmission EDX.},
  author={Romano Brandt L, Salvati E, Wermeille D, Papadaki C, Le Bourhis E et al.},
  journal={ACS applied materials & interfaces},
  volume={13},
  pages={6795-6804},
  year = "2021"
}

BibTeX

@article{theanalysisofmi-2021/1,
  title={The analysis of micro-scale deformation and fracture of carbonized elastomer-based composites by in situ SEM},
  author={Statnik ES, Ignatyev SD, Stepashkin AA, Salimon AI, Chukov D et al.},
  journal={Molecules},
  volume={26},
  number={587},
  publisher={MDPI},
  year = "2021"
}

BibTeX

@inproceedings{insitufluoresce-2021/1,
  title={In situ fluorescence/photoacoustic monitoring of diatom algae},
  author={Cvjetinovic J, Bedoshvili YD, Nozdriukhin DV, Efimova OI, Salimon AI et al.},
  year = "2021"
}

@book{preface-2021/1,
  title={Preface},
  author={Korsunsky AM & Ramirez-Castellanos J},
  year = "2021"
}

BibTeX

@article{prefacevirtuals-2020/12,
  title={Preface – Virtual special issue on nanomechanical testing in materials research and development},
  author={Molina-Aldareguia J, Sebastiani M & Korsunsky A},
  journal={Materials and Design},
  volume={199},
  number={109407},
  publisher={Elsevier},
  year = "2020"
}

BibTeX

@article{multiscaledigit-2020/11,
  title={Multi-scale digital image correlation analysis of in situ deformation of open-cell porous ultra-high molecular weight polyethylene foam},
  author={Statnik ES, Dragu C, Besnard C, Lunt AJG, Salimon AI et al.},
  journal={Polymers},
  volume={12},
  number={2607},
  publisher={MDPI},
  year = "2020"
}

BibTeX

@article{whyislocalstres-2020/11,
  title={Why is local stress statistics normal, and strain lognormal?},
  author={Chen J & Korsunsky A},
  journal={Materials and Design},
  volume={198},
  number={109319},
  publisher={Elsevier},
  year = "2020"
}

BibTeX

@article{evolutionofstre-2020/11,
  title={Evolution of stress fields during crack growth and arrest in a brittle-ductile CrN-Cr clamped-cantilever analysed by X-ray nanodiffraction and modelling},
  author={Meindlhumer M, Brandt L, Zalesak J, Rosenthal M, Hruby H et al.},
  journal={Materials and Design},
  volume={198},
  number={109365},
  publisher={Elsevier},
  year = "2020"
}

BibTeX

@article{insituneutrondi-2020/10,
  title={In situ neutron diffraction investigation of texture-dependent Shape Memory Effect in a near equiatomic NiTi alloy},
  author={Wang Z, Chen J, Besnard C, Kuncicka L, Kocich R et al.},
  journal={Acta Materialia},
  publisher={Elsevier BV},
  year = "2020"
}

BibTeX

@article{hardxrayptychog-2020/10,
  title={Hard X-ray ptychography for optics characterization using a partially coherent synchrotron source},
  author={Moxham T, Parsons A, Zhou T, Alianelli L, Wang H et al.},
  journal={Journal of Synchrotron Radiation},
  volume={27},
  pages={1688-1695},
  publisher={International Union of Crystallography},
  year = "2020"
}

BibTeX

@article{modeifractureto-2020/9,
  title={Mode I fracture toughness determination in Cu/W nano-multilayers on polymer substrate by SEM - Digital Image Correlation},
  author={Romano Brandt L, Salvati E, Bourhis E & Korsunsky A},
  journal={Journal of the Mechanics and Physics of Solids},
  volume={145},
  number={104145},
  publisher={Elsevier},
  year = "2020"
}

BibTeX

@article{finiteelementmo-2020/9,
  title={Finite element modelling and experimental validation of the enamel demineralisation process at the rod level},
  author={Salvati E, Besnard C, Harper R, Moxham T, Shelton R et al.},
  journal={Journal of Advanced Research},
  volume={29},
  pages={167-177},
  publisher={Elsevier},
  year = "2020"
}

BibTeX

@article{microstructuree-2020/9,
  title={Microstructure evolution in a severely cold-worked NiTi wire during ageing treatment: An in situ neutron diffraction study},
  author={Wang Z, Chen J, Besnard C & Korsunsky A},
  journal={Materials Letters},
  volume={281},
  number={128676},
  publisher={Elsevier},
  year = "2020"
}

BibTeX

@article{ovinebonemorpho-2020/9,
  title={Ovine Bone Morphology and Deformation Analysis Using Synchrotron X-ray Imaging and Scattering},
  author={Statnik ES, Salimon AI, Besnard C, Chen J, Wang Z et al.},
  journal={QUANTUM BEAM SCIENCE},
  volume={4},
  number={ARTN 29},
  year = "2020"
}

BibTeX

@article{theuseofsurface-2020/8,
  title={The use of surface topography for the identification of discontinuous displacements due to cracks},
  author={Uzun F & Korsunsky AM},
  journal={Metals},
  volume={10},
  number={1037},
  publisher={MDPI},
  year = "2020"
}

BibTeX

@article{femexplorationo-2020/8,
  title={FEM exploration of the potential of silica diatom frustules for vibrational MEMS applications},
  author={Abdusatorov B, Salimon A, Bedoshvili Y, Likhoshway Y & Korsunsky A},
  journal={Sensors and Actuators A: Physical},
  volume={315},
  number={112270},
  publisher={Elsevier},
  year = "2020"
}

BibTeX

@article{synchrotronxray-2020/8,
  title={Synchrotron X-ray quantitative evaluation of transient deformation and damage phenomena in a single Nickel-rich cathode particle},
  author={Romano Brandt L, Marie J-J, Moxham T, Forstermann D, Salvati E et al.},
  journal={Energy and Environmental Science},
  volume={13},
  pages={3556-3566},
  publisher={Royal Society of Chemistry},
  year = "2020"
}

BibTeX

@article{dauxeticmetamat-2020/8,
  title={2D auxetic metamaterials with tuneable micro-/nanoscale apertures},
  author={Mizzi L, Salvati E, Spaggiari A, Tan J-C & Korsunsky AM},
  journal={Applied Materials Today},
  volume={20},
  number={100780},
  publisher={Elsevier},
  year = "2020"
}

BibTeX

@article{eigenstrainboun-2020/6,
  title={Eigenstrain boundary layer modelling of the yttria-partially stabilised zirconia–porcelain interface in dental prostheses},
  author={Lunt A & Korsunsky A},
  journal={International Journal of Engineering Science},
  volume={153},
  number={103315},
  publisher={Elsevier },
  year = "2020"
}

BibTeX

@article{fastmassproduct-2020/5,
  title={Fast Mass-Production of Medical Safety Shields under COVID-19 Quarantine: Optimizing the Use of University Fabrication Facilities and Volunteer Labor.},
  author={Kalyaev V, Salimon AI & Korsunsky AM},
  journal={International journal of environmental research and public health},
  volume={17},
  year = "2020"
}

BibTeX

@article{acidinduceddemi-2020/5,
  title={Acid-induced demineralisation of human enamel as a function of time and pH observed using X-ray and polarised light imaging},
  author={Harper RA, Shelton RM, James JD, Salvati E, Besnard C et al.},
  journal={Acta Biomaterialia},
  volume={120},
  pages={240-248},
  publisher={Elsevier },
  year = "2020"
}

BibTeX

@article{designandmechan-2020/5,
  title={Design and mechanical properties of 3D-printed auxetic honeycomb structure},
  author={Lvov V, Senatov F, Korsunsky A & Salimon A},
  journal={Materials Today Communications},
  volume={24},
  number={101173},
  publisher={Elsevier },
  year = "2020"
}

BibTeX

@article{advancedsurface-2020/5,
  title={Advanced surface enhancement},
  author={Korsunsky A},
  journal={Metals},
  volume={10},
  number={700},
  publisher={MDPI},
  year = "2020"
}

BibTeX

@article{synchrotronxray-2020/5,
  title={Synchrotron X-ray scattering analysis of nylon-12 crystallisation variation depending on 3D printing conditions},
  author={de Jager B, Moxham T, Besnard C, Salvati E, Chen J et al.},
  journal={Polymers},
  volume={12},
  publisher={MDPI},
  year = "2020"
}

BibTeX

@article{advancesinaddit-2020/5,
  title={Advances in additive manufacturing process simulation: Residual stresses and distortion predictions in complex metallic components},
  author={Song X, Feih S, Zhai W, Sun CN, Li F et al.},
  journal={Materials and Design},
  volume={193},
  year = "2020"
}

BibTeX

@article{neutronstrainsc-2020/4,
  title={Neutron strain scanning for experimental validation of the artificial intelligence based eigenstrain contour method},
  author={Uzun F, Papadaki C, Wang Z & Korsunsky AM},
  journal={Mechanics of Materials},
  volume={143},
  number={103316},
  pages={103316-103316},
  publisher={Elsevier BV},
  year = "2020"
}

BibTeX

@article{nanoscaleresidu-2020/4,
  title={Nano-scale residual stress profiling in thin multilayer films with non-equibiaxial stress state},
  author={Sebastiani M, Rossi E, Mughal MZ, Benedetto A, Jacquet P et al.},
  journal={Nanomaterials},
  volume={10},
  publisher={MDPI},
  year = "2020"
}

BibTeX

@article{insituformation-2020/3,
  title={In situ formation of nanoporous silicon on a silicon wafer via the magnesiothermic reduction reaction (MRR) of diatomaceous earth},
  author={Aggrey P, Abdusatorov B, Kan Y, Salimon IA, Lipovskikh SA et al.},
  journal={Nanomaterials},
  volume={10},
  publisher={MDPI},
  year = "2020"
}

BibTeX

@article{photoacoustican-2020/3,
  title={Photoacoustic and fluorescence lifetime imaging of diatoms},
  author={Cvjetinovic J, Salimon AI, Novoselova MV, Sapozhnikov PV, Shirshin EA et al.},
  journal={Photoacoustics},
  volume={18},
  number={100171},
  publisher={Elsevier},
  year = "2020"
}

BibTeX

@article{thefabricationa-2020/3,
  title={The fabrication and characterization of bioengineered ultra-high molecular weight polyethylene-collagen-hap hybrid bone-cartilage patch},
  author={Kan Y, Cvjetinovic J, Statnik E, Ryazantsev S, Anisimova N et al.},
  journal={Materials Today Communications},
  volume={24},
  number={101052},
  publisher={Elsevier},
  year = "2020"
}

BibTeX

@article{ananalysisoffat-2020/2,
  title={An analysis of fatigue failure mechanisms in an additively manufactured and shot peened IN 718 nickel superalloy},
  author={Salvati E, Lunt A, Heason C, Baxter G & Korsunsky A},
  journal={Materials and Design},
  volume={191},
  pages={108605},
  publisher={Elsevier },
  year = "2020"
}

BibTeX

@article{anexperimentala-2020/2,
  title={An experimental and numerical analysis of residual stresses in a TIG weldment of a single crystal nickel-base superalloy},
  author={Chen J, Salvati E, Uzun F, Papadaki C, Wang Z et al.},
  journal={Journal of Manufacturing Processes},
  volume={53},
  pages={190-200},
  publisher={Elsevier},
  year = "2020"
}

BibTeX

@article{fibseminvestiga-2020/1,
  title={FIB-SEM investigation of laser-induced periodic surface structures and conical surface microstructures on D16T (AA2024-T4) alloy},
  author={KORSUNSKY A},
  journal={Metals},
  volume={10},
  pages={144},
  publisher={MDPI},
  year = "2020"
}

BibTeX

@article{photoinducedsel-2020/1,
  title={Photo induced self-diffusion and viscosity in amorphous chalcogenide films},
  author={Kaganovskii Y, Beke D, Freilikher V, Kökényesi S & Korsunsky A},
  journal={Materials Research Express},
  volume={7},
  number={016204},
  publisher={IOP Publishing},
  year = "2020"
}

BibTeX

@inproceedings{cracktipstressf-2020/1,
  title={Crack tip stress field analysis of crack surface contact and opening during in situ wedge loading of human enamel},
  author={Salvati E, Besnard C, Harper R, Moxham T, Shelton R et al.},
  booktitle={Advances in Fracture and Damage Mechanics XVIII},
  pages={85-91},
  year = "2020"
}

BibTeX

@misc{engineeringmate-2020/1,
  title={Engineering materials science using synchrotron radiation},
  author={Korsunsky AM},
  year = "2020"
}

BibTeX

@article{featuresofforma-2020/1,
  title={Features of formation of colonial settlements of marine benthic diatoms on the surface of synthetic polymer},
  author={Sapozhnikov PV, Salimon AI, Korsunsky AM, Kalinina OY, Senatov FS et al.},
  journal={Marine Biological Journal},
  volume={5},
  pages={88-104},
  year = "2020"
}

BibTeX

@misc{shapememorypoly-2020/,
  title={Shape memory polymer blends and composites for 3D and 4D printing applications},
  author={Salimon AI, Senatov FS, Kalyaev VA & Korsunsky AM},
  year = "2020"
}

BibTeX

@inproceedings{newapproachforf-2020/,
  title={New Approach for Fast Residual Strain Estimation Through Rational 2D Diffraction Pattern Processing},
  author={Statnik ES, Uzun F, Salimon AI & Korsunsky AM},
  pages={282-288},
  year = "2020"
}

BibTeX

@inproceedings{theuseofprofilo-2020/,
  title={The use of profilometry techniques and eigenstrain theory for the analysis of creep behavior in nickel superalloy welds},
  author={Uzun F & Korsunsky AM},
  pages={2041-2058},
  year = "2020"
}

BibTeX

@inproceedings{siliceousdiatom-2020/,
  title={Siliceous diatom frustules - A smart nanotechnology platform},
  author={Korsunsky AM, Bedoshvili YD, Cvjetinovic J, Aggrey P, Dragnevski KI et al.},
  pages={2032-2040},
  year = "2020"
}

BibTeX

@inproceedings{ontheelectrospi-2020/,
  title={On the electrospinning of nanostructured collagen-PVA fiber mats},
  author={Kan Y, Salimon AI & Korsunsky AM},
  pages={2013-2019},
  year = "2020"
}

BibTeX

@inproceedings{ontheapplicatio-2020/,
  title={On the application of digital optical microscopy in the study of materials structure and deformation},
  author={Statnik ES, Salimon AI & Korsunsky AM},
  pages={1917-1923},
  year = "2020"
}

BibTeX

@inproceedings{theuseofeigenst-2020/,
  title={The use of eigenstrain theory and fuzzy techniques for intelligent modeling of residual stress and creep relaxation in welded superalloys},
  author={Uzun F & Korsunsky AM},
  pages={1880-1883},
  year = "2020"
}

BibTeX

@inproceedings{aminiatlasofdia-2020/,
  title={A Mini-Atlas of diatom frustule electron microscopy images at different magnifications},
  author={Salimon AI, Sapozhnikov PV, Everaerts J, Kalinina OY, Besnard C et al.},
  pages={1924-1933},
  year = "2020"
}

BibTeX

@inproceedings{thestructureand-2020/,
  title={The structure and phase composition of nano-silicon as a function of calcination conditions of diatomaceous earth},
  author={Aggrey P, Salimon AI, Abdusatorov B, Fedotov SS & Korsunsky AM},
  pages={1884-1892},
  year = "2020"
}

BibTeX

@inproceedings{prefaceickem-2020/,
  title={Preface - ICKEM 2020},
  author={Korsunsky AM, Dragnevski KI, Salimon AI & Ramirez-Castellanos J},
  pages={A1-A1},
  year = "2020"
}

BibTeX

@inproceedings{thecharacteriza-2020/,
  title={The characterization of PVA/PHY hydrogels for 3D printing fabrication of organ phantoms},
  author={Statnik ES, Sorokina EA, Larin II, Yu K, Salimon AI et al.},
  pages={1874-1879},
  year = "2020"
}

BibTeX

@article{pyriteposterest-2019/12,
  title={Pyrite 'poste restante' Intra-diatom framboids},
  author={Korsunsky AM, Kalinina OY, Sapozhnikov PV, Everaerts J & Salimon AI},
  journal={MATERIALS TODAY},
  volume={32},
  pages={293-294},
  year = "2019"
}

BibTeX

@article{mechanicalprope-2019/12,
  title={Mechanical properties of thermally grown submicron oxide layers on a nickel-based superalloy},
  author={Everaerts J, Salvati E, Li H, Li W & Korsunsky AM},
  journal={Corrosion Science},
  volume={165},
  number={108388},
  publisher={Elsevier},
  year = "2019"
}

BibTeX

@article{multiscalesynch-2019/11,
  title={Multiscale synchrotron scattering studies of the temperature-dependent changes in the structure and deformation response of a thermoplastic polyurethane elastomer},
  author={Sui T, Salvati E, Zhang H, Dolbnya IP & Korsunsky A},
  journal={Materials Today Advances},
  volume={4},
  pages={r 100024},
  publisher={Elsevier},
  year = "2019"
}

BibTeX

@article{evolutionofther-2019/11,
  title={Evolution of thermal and mechanical properties of Nitinol wire as a function of ageing treatment conditions},
  author={Wang Z, Everaerts J, Salvati E & Korsunsky A},
  journal={Journal of Alloys and Compounds},
  volume={819},
  number={153024},
  publisher={Elsevier},
  year = "2019"
}

BibTeX

@article{nanoscaleresidu-2019/11,
  title={Nano-scale residual stress depth profiling in Cu/W nano-multilayers as a function of magnetron sputtering pressure},
  author={Romano-Brandt L, Salvati E, Le Bourhis E, Moxham T, Dolbnya IP et al.},
  journal={Surface and Coatings Technology},
  volume={381},
  number={125142},
  publisher={Elsevier},
  year = "2019"
}

BibTeX

@article{polartransforma-2019/10,
  title={Polar transformation of 2D X-ray diffraction patterns and the experimental validation of the hDIC technique},
  author={Uzun F, Salimon AI, Statnik ES, Besnard C, Chen J et al.},
  journal={Measurement},
  volume={151},
  number={107193},
  publisher={Elsevier},
  year = "2019"
}

BibTeX

@article{highlystretchab-2019/10,
  title={Highly stretchable two-dimensional auxetic metamaterial sheets fabricated via direct-laser cutting},
  author={Mizzi L, Salvati E, Spaggiari A, Tan J-C & Korsunsky A},
  journal={International Journal of Mechanical Sciences},
  volume={167},
  number={105242},
  publisher={Elsevier},
  year = "2019"
}

BibTeX

@article{investigationsi-2019/9,
  title={Investigations into the interface failure of yttria partially stabilised zirconia - porcelain dental prostheses through microscale residual stress and phase quantification},
  author={Lunt A, Salvati E, Baimpas N, Dolbnya I, Neo TK et al.},
  journal={Dental Materials},
  volume={35},
  pages={1576-1593},
  publisher={Elsevier},
  year = "2019"
}

BibTeX

@article{nanoscaledepthp-2019/9,
  title={Nanoscale depth profiling of residual stresses due to fine surface finishing},
  author={Everaerts J, Salvati E & Korsunsky A},
  journal={ACS Advanced Materials Interfaces},
  publisher={Wiley},
  year = "2019"
}

BibTeX

@inproceedings{bondingstrength-2019/8,
  title={Bonding strength improvement through numerical simulation of particle impact process during metal cold spray},
  author={Song X, Jin XZ, Everaerts J, Tan WY, Sun W et al.},
  booktitle={International Conference on Advanced Surface Enhancement},
  pages={144-152},
  year = "2019"
}

BibTeX

@article{microscalemeasu-2019/8,
  title={Micro-scale measurement and FEM modelling of residual stresses in AA6082-T6 Al alloy generated by wire EDM cutting},
  author={Salvati E & Korsunsky A},
  journal={Journal of Materials Processing Technology},
  volume={275},
  number={116373},
  publisher={Elsevier},
  year = "2019"
}

BibTeX

@article{datasetsformult-2019/8,
  title={Datasets for multi-scale diffraction analysis (synchrotron XRD and EBSD) of twinning-detwinning during tensile-compressive deformation of AZ31B magnesium alloy samples},
  author={Zhang H, Jérusalem A, Salvati E, Papadaki C, Fong KS et al.},
  journal={Data in Brief},
  volume={26},
  pages={104423},
  publisher={Elsevier},
  year = "2019"
}

BibTeX

@article{areviewofexperi-2019/7,
  title={A review of experimental approaches to fracture toughness evaluation at the micro-scale},
  author={Ast J, Ghidelli M, Durst K, Göken M, Sebastiani M et al.},
  journal={Materials and Design},
  volume={173},
  year = "2019"
}

BibTeX

@article{porousopencellu-2019/7,
  title={Porous open-cell UHMWPE: Experimental study of structure and mechanical properties},
  author={Salimon AI, Statnik ES, Zadorozhnyy MY, Senatov FS, Zherebtsov DD et al.},
  journal={Materials},
  volume={12},
  number={2195},
  publisher={MDPI},
  year = "2019"
}

BibTeX

@article{evaluationofsin-2019/7,
  title={Evaluation of single crystal elastic stiffness coefficients of a nickel-based superalloy by electron backscatter diffraction and nanoindentation},
  author={Everaerts J, Papadaki C, Li W & Korsunsky A},
  journal={Journal of the Mechanics and Physics of Solids},
  volume={131},
  pages={303-312},
  publisher={Elsevier},
  year = "2019"
}

BibTeX

@article{theheightdigita-2019/6,
  title={The height Digital Image Correlation (hDIC) technique for the identification of triaxial surface deformations},
  author={Uzun F & Korsunsky A},
  journal={International Journal of Mechanical Sciences},
  volume={159},
  pages={417-423},
  publisher={Elsevier},
  year = "2019"
}

BibTeX

@article{transversefatig-2019/6,
  title={Transverse fatigue behaviour and residual stress analyses of double sided FSW aluminium alloy joints},
  author={Salvati E, Everaerts J, Kageyama K & Korsunsky A},
  journal={Fatigue and Fracture of Engineering Materials and Structures},
  volume={42},
  pages={1980-1990},
  publisher={Wiley},
  year = "2019"
}

BibTeX

@article{prefacevirtuals-2019/5,
  title={Preface: Virtual special issue on nanomechanical testing in materials research and development},
  author={Durst K, Sebastiani M & Korsunsky A},
  journal={Materials and Design},
  volume={176},
  number={107832},
  publisher={Elsevier},
  year = "2019"
}

BibTeX

@article{ontheapplicatio-2019/3,
  title={On the application of principles of artificial intelligence for eigenstrain reconstruction of volumetric residual stresses in non-uniform Inconel alloy 740H weldments},
  author={Uzun FATIH & Korsunsky ALEXANDER},
  journal={FINITE ELEMENTS IN ANALYSIS AND DESIGN},
  year = "2019"
}

BibTeX

@article{ontheanalysisof-2019/3,
  title={On the analysis of post weld heat treatment residual stress relaxation in Inconel alloy 740H by combining the principles of artificial intelligence with the eigenstrain theory},
  author={Uzun F & Korsunsky A},
  journal={Materials Science and Engineering: A},
  volume={752},
  pages={180-191},
  publisher={Elsevier},
  year = "2019"
}

BibTeX

@article{multiscalemecha-2019/2,
  title={Multi-scale mechanisms of twinning-detwinning in magnesium alloy AZ31B simulated by crystal plasticity modeling and validated via in situ synchrotron XRD and in situ SEM-EBSD},
  author={Zhang H, Jerusalem A, Salvati E, Papadaki C, Fong KS et al.},
  journal={International Journal of Plasticity},
  volume={119},
  pages={43-56},
  publisher={Elsevier},
  year = "2019"
}

BibTeX

@article{naturesneatnano-2019/1,
  title={Nature’s neat nanostructuration: The fascinating frustules of diatom algae},
  author={Korsunsky A, Sapozhnikov PV, Everaerts J & Salimon AI},
  journal={Materials Today},
  volume={22},
  pages={159-160},
  publisher={Elsevier},
  year = "2019"
}

BibTeX

@article{generalisedresi-2019/1,
  title={Generalised residual stress depth profiling at the nanoscale using focused ion beam milling},
  author={Salvati E, Romano-Brandt L, Mughal MZ, Sebastiani M & Korsunsky A},
  journal={Journal of the Mechanics and Physics of Solids},
  volume={125},
  pages={488-501},
  publisher={Elsevier},
  year = "2019"
}

@inproceedings{onthefabricatio-2019/1,
  title={On the fabrication of diatomite earth-based ceramics with multiscale porosity},
  author={Kan Y, Salimon AI, Sapozhnikov PV, Somov PA, Everaerts J et al.},
  pages={310-317},
  year = "2019"
}

@book{preface-2019/1,
  title={Preface},
  author={Korsunsky AM},
  year = "2019"
}

BibTeX

@inproceedings{grainrotationdu-2019/1,
  title={Grain rotation during twin-detwin deformation of mg az31 alloy using in situ xrd and ebsd},
  author={Zhang H, Salvati E, Papadaki C, Fong KS, Song X et al.},
  pages={17-22},
  year = "2019"
}

@inproceedings{polartransforma-2019/1,
  title={Polar Transformation of 2D X-ray Diffraction Patterns for 2D Strain Evaluation},
  author={Statnik ES, Salimon AI, Uzun F & Korsunsky AM},
  pages={397-401},
  year = "2019"
}

@inproceedings{nanoindentation-2019/1,
  title={Nanoindentation Analysis of Mechanical Property Statistics of Canine Bone Tissue},
  author={Statnik ES, Salimon AI, Kan YV, Cvjetinovic J & Korsunsky AM},
  pages={443-448},
  year = "2019"
}

@inproceedings{functionalizeds-2019/1,
  title={Functionalized Silicon: A Nanometallurgical Approach to Produce Nanoporous Silicon},
  author={Aggrey P, Salimon AI & Korsunsky AM},
  pages={351-355},
  year = "2019"
}

@inproceedings{ontheprospectso-2019/1,
  title={On the prospects of using Biogenic Silica for MEMS (Micro-Electro-Mechanical Systems)},
  author={Abdusatorov B, Everaerts J, Salimon AI & Korsunsky AM},
  pages={468-473},
  year = "2019"
}

@inproceedings{collagenbasedco-2019/1,
  title={Collagen-based Composite and Hybrid Bone Implant Materials: Structure and Property Characterization},
  author={Kan Y, Cvjetinovic J, Salimon AI, Statnik ES, Ryazantsev SV et al.},
  pages={356-364},
  year = "2019"
}

BibTeX

@inproceedings{challengesandpr-2019/,
  title={Challenges and Progress in Residual Stress Evaluation and Analysis at the Nanoscale},
  author={Korsunsky AM},
  pages={319-321},
  year = "2019"
}

BibTeX

@inproceedings{combinedanalysi-2019/,
  title={COMBINED ANALYSIS OF STRUCTURE AND STRAIN IN ENGINEERING MATERIALS BY NEUTRON AND SYNCHROTRON X-RAY DIFFRACTION, AND ELECTRON MICROSCOPY},
  author={Korsunsky A},
  pages={E340-E340},
  year = "2019"
}

BibTeX

@article{ontheapplicatio-2018/12,
  title={On the application of principles of artificial intelligence for eigenstrain reconstruction of volumetric residual stresses in non-uniform Inconel alloy 740H weldments},
  author={Uzun F & Korsunsky A},
  journal={Finite Elements in Analysis and Design},
  volume={155},
  pages={43-51},
  publisher={Elsevier},
  year = "2018"
}

BibTeX

@article{residualstresse-2018/11,
  title={Residual stresses in single particle splat of metal cold spray process - Numerical simulation and direct measurement},
  author={Song X, Everaerts J, Zhai W, Zheng H, Tan AWY et al.},
  journal={MATERIALS LETTERS},
  volume={230},
  pages={152-156},
  year = "2018"
}

BibTeX

@article{theinclusionofs-2018/11,
  title={The inclusion of short-transverse displacements in the eigenstrain reconstruction of residual stress and distortion in in740h weldments},
  author={Uzun F, Everaerts J, Brandt LR, Kartal M, Salvati E et al.},
  journal={Journal of Manufacturing Processes},
  volume={36},
  pages={601-612},
  publisher={Elsevier},
  year = "2018"
}

BibTeX

@article{probingthecompl-2018/11,
  title={Probing the complex thermo-mechanical properties of a 3D-printed polylactide-hydroxyapatite composite using in situ synchrotron X-ray scattering},
  author={Sui T, Salvati E, Zhang H, Nyaza K, Senatov FS et al.},
  journal={Journal of Advanced Research},
  volume={16},
  pages={113-122},
  publisher={Elsevier},
  year = "2018"
}

BibTeX

@article{residualstrainm-2018/11,
  title={Residual strain mapping through pair distribution function analysis of the porcelain veneer within a yttria partially stabilised zirconia dental prosthesis},
  author={Korsunsky A, Lunt AJG, Chater P, Kleppe A, Baimpas N et al.},
  journal={Dental Materials},
  volume={35},
  pages={257-269},
  publisher={Elsevier},
  year = "2018"
}

BibTeX

@article{influenceofsize-2018/10,
  title={Influence of size effect and plastic strain gradient on the springback behaviour of metallic materials in microbending process},
  author={Wang JL, Fu MW, Shi SQ & Korsunsky AM},
  journal={INTERNATIONAL JOURNAL OF MECHANICAL SCIENCES},
  volume={146},
  pages={105-115},
  year = "2018"
}

BibTeX

@article{separatingmacro-2018/9,
  title={Separating macro- (Type I) and micro- (Type II plus III) residual stresses by ring-core FIB-DIC milling and eigenstrain modelling of a plastically bent titanium alloy bar},
  author={Everaerts J, Salvati E, Uzun F, Brandt LR, Zhang H et al.},
  journal={ACTA MATERIALIA},
  volume={156},
  pages={43-51},
  year = "2018"
}

BibTeX

@article{evaluationofmac-2018/9,
  title={Evaluation of macro- and microscopic residual stresses in laser shock-peened titanium alloy by FIB-DIC ring-core milling with different core diameters},
  author={Everaerts J, Song X, Nagarajan B & Korsunsky AM},
  journal={SURFACE & COATINGS TECHNOLOGY},
  volume={349},
  pages={719-724},
  year = "2018"
}

BibTeX

@article{insitumonitorin-2018/9,
  title={In situ monitoring and analysis of enamel demineralisation using synchrotron X-ray scattering.},
  author={Sui T, Salvati E, Harper RA, Zhang H, Shelton RM et al.},
  journal={Acta biomaterialia},
  volume={77},
  pages={333-341},
  year = "2018"
}

BibTeX

@article{theeffectofsurf-2018/9,
  title={The effect of surface damage and residual stresses on the fatigue life of nickel superalloys at high temperature},
  author={Fleury RMN, Salvati E, Nowell D, Korsunsky A, Silva F et al.},
  journal={International Journal of Fatigue},
  volume={119},
  pages={34-42},
  publisher={Elsevier},
  year = "2018"
}

BibTeX

@article{dprintedpeekcar-2018/8,
  title={3D-printed PEEK-carbon fiber (CF) composites: Structure and thermal properties},
  author={Stepashkin AA, Chukov DI, Senatov FS, Salimon AI, Korsunsky AM et al.},
  journal={COMPOSITES SCIENCE AND TECHNOLOGY},
  volume={164},
  pages={319-326},
  year = "2018"
}

BibTeX

@article{ontheparadigmof-2018/8,
  title={On the paradigm of hierarchically structured materials, in conjunction with the virtual special issue on functional materials},
  author={Korsunsky A & Salimon AI},
  journal={Materials and Design},
  volume={158},
  pages={1-4},
  publisher={Elsevier},
  year = "2018"
}

BibTeX

@article{structurefuncti-2018/8,
  title={Structure-function correlative microscopy of peritubular and intertubular dentine},
  author={Sui T, Dluhoš J, Li T, Zeng K, Cernescu A et al.},
  journal={Materials},
  volume={11},
  pages={1493},
  publisher={MDPI},
  year = "2018"
}

BibTeX

@article{onthedependence-2018/8,
  title={On the dependence of γ' precipitate size in a nickel-based superalloy on the cooling rate from super-solvus temperature heat treatment},
  author={Papadaki C, Li W & Korsunsky AM},
  journal={Materials},
  volume={11},
  pages={1528},
  publisher={MDPI},
  year = "2018"
}

BibTeX

@article{prefacevirtuals-2018/7,
  title={Preface - Virtual Special Issue on Materials and Design for Sports Technology},
  author={Dasari A, Chen Z, Huang WM & Korsunsky AM},
  journal={MATERIALS & DESIGN},
  volume={150},
  pages={28-28},
  year = "2018"
}

BibTeX

@article{insitudiagnosti-2018/7,
  title={In situ diagnostics of damage accumulation in Ni-based superalloys using high-temperature computed tomography},
  author={Kageyama K, Adziman F, Alabort E, Sui T, Korsunsky A et al.},
  journal={Metallurgical and Materials Transactions A},
  volume={49},
  pages={4274-4289},
  publisher={Springer Verlag},
  year = "2018"
}

BibTeX

@article{ontheidentifica-2018/7,
  title={On the identification of eigenstrain sources of welding residual stress in bead-on-plate inconel 740H specimens},
  author={Uzun F & Korsunsky A},
  journal={International Journal of Mechanical Sciences},
  volume={145},
  pages={231-245},
  publisher={Elsevier},
  year = "2018"
}

BibTeX

@article{complexvariable-2018/4,
  title={Complex variable formulation for a rigid line inclusion interacting with a generalized singularity},
  author={Ma L, Wang B & Korsunsky AM},
  journal={ARCHIVE OF APPLIED MECHANICS},
  volume={88},
  pages={613-627},
  year = "2018"
}

BibTeX

@article{asimplifiedfeme-2018/4,
  title={A simplified FEM eigenstrain residual stress reconstruction for surface treatments in arbitrary 3D geometries},
  author={Salvati E & Korsunsky AM},
  journal={INTERNATIONAL JOURNAL OF MECHANICAL SCIENCES},
  volume={138},
  pages={457-466},
  year = "2018"
}

BibTeX

@article{nanoscaleorigin-2018/4,
  title={Nanoscale origins of the size effect in the compression response of single crystal Ni-base superalloy micro-pillars},
  author={Ying S, Ma L, Sui T, Papadaki C, Salvati E et al.},
  journal={Materials},
  volume={11},
  pages={561},
  publisher={MDPI},
  year = "2018"
}

BibTeX

@article{multiscaleanaly-2018/4,
  title={Multiscale analysis of bamboo deformation mechanisms following NaOH treatment using X-ray and correlative microscopy},
  author={Salvati E, Brandt LR, Uzun F, Zhang H, Papadaki C et al.},
  journal={Acta Biomaterialia},
  volume={72},
  pages={329-341},
  publisher={Elsevier},
  year = "2018"
}

BibTeX

@article{digitalimagecor-2018/3,
  title={Digital image correlation of 2D X-ray powder diffraction data for lattice strain evaluation},
  author={Zhang H, Sui T, Salvati E, Daisenberger D, Lunt AJG et al.},
  journal={Materials},
  volume={11},
  pages={427},
  publisher={MDPI},
  year = "2018"
}

BibTeX

@article{nanoscalestruct-2018/2,
  title={Nanoscale structural damage due to focused ion beam milling of silicon with Ga-ions},
  author={Salvati E, Brandt LR, Papadaki C, Zhang H, Mousavi SM et al.},
  journal={MATERIALS LETTERS},
  volume={213},
  pages={346-349},
  year = "2018"
}

BibTeX

@article{nanoscaleresidu-2018/2,
  title={Nanoscale residual stress depth profiling by focused ion beam milling and eigenstrain analysis},
  author={Korsunsky A, Salvati E, Lunt AGJ, Sui T, Mughal MZ et al.},
  journal={Materials and Design},
  volume={145},
  pages={55-64},
  publisher={Elsevier},
  year = "2018"
}

BibTeX

@article{ontheoriginsofs-2018/1,
  title={On the origins of strain inhomogeneity in amorphous materials},
  author={Lunt AJG, Chater P & Korsunsky AM},
  journal={Scientific Reports},
  volume={8},
  pages={1574},
  publisher={Nature Publishing Group},
  year = "2018"
}

@book{preface-2018/1,
  title={Preface},
  author={Korsunsky AM},
  year = "2018"
}

@inproceedings{comparativemech-2018/1,
  title={Comparative mechanical microscopy of Mn-Ni-Co 4:1:1 Li-Ion battery cathodes},
  author={Romano-Brandt L, Everaerts J, Zhou J, Song B, Li L et al.},
  pages={546-550},
  year = "2018"
}

@inproceedings{theobservationa-2018/1,
  title={The observation and interpretation of crack closure under plain fatigue conditions},
  author={Qi P, Salvati E, Paynter R, Cavalheiro JVS, Nowell D et al.},
  pages={623-625},
  year = "2018"
}

@inproceedings{onthemicrostruc-2018/1,
  title={On the microstructure size effect in SLS-built 316L stainless steel parts},
  author={De Jager B, Everaerts J, Salimon AI & Korsunsky AM},
  pages={836-841},
  year = "2018"
}

@inproceedings{ondiatomcoloniz-2018/1,
  title={On diatom colonization of porous UHMWPE scaffolds},
  author={Salimon AI, Everaerts J, Sapozhnikov PV, Statnik ES & Korsunsky AM},
  pages={695-699},
  year = "2018"
}

BibTeX

@article{ananalysisofmac-2017/7,
  title={An analysis of macro- and micro-scale residual stresses of Type I, II and III using FIB-DIC micro-ring-core milling and crystal plasticity FE modelling},
  author={Salvati E & Korsunsky AM},
  journal={International Journal of Plasticity},
  volume={98},
  pages={123-138},
  publisher={Elsevier},
  year = "2017"
}

BibTeX

@article{probingthedefor-2017/6,
  title={Probing the deformation and fracture properties of Cu/W nano-multilayers by in situ SEM and synchrotron XRD strain microscopy},
  author={Brandt LR, Salvati E, Papadaki C, Zhang H, Ying S et al.},
  journal={SURFACE & COATINGS TECHNOLOGY},
  volume={320},
  pages={158-167},
  year = "2017"
}

BibTeX

@inproceedings{prefacetotheick-2017/6,
  title={Preface to the ICKEM 2017 conference proceedings},
  author={Korsunsky AM},
  year = "2017"
}

BibTeX

@article{characterisatio-2017/5,
  title={Characterisation of nanovoiding in dental porcelain using small angle neutron scattering and transmission electron microscopy.},
  author={Lunt A, Terry A, Ying S, Baimpas N, Sui T et al.},
  journal={Dental materials : official publication of the Academy of Dental Materials},
  volume={33},
  pages={486-497},
  year = "2017"
}

BibTeX

@article{strainsoftening-2017/4,
  title={Strain softening of nano-scale fuzzy interfaces causes Mullins effect in thermoplastic polyurethane.},
  author={Sui T, Salvati E, Ying S, Sun G, Dolbnya IP et al.},
  journal={Scientific Reports},
  volume={7},
  pages={916},
  publisher={Nature Publishing Group},
  year = "2017"
}

BibTeX

@article{photoluminescen-2017/4,
  title={Photoluminescence segmentation within individual hexagonal monolayer tungsten disulfide domains grown by chemical vapor deposition.},
  author={Sheng Y, Wang X, Fujisawa K, Ying S, Elias AL et al.},
  journal={ACS Applied Materials & Interfaces},
  volume={9},
  pages={15005-15014},
  publisher={American Chemical Society},
  year = "2017"
}

BibTeX

@article{residualstresse-2017/3,
  title={Residual stress evaluation at the micro- and nano-scale: Recent advancements of measurement techniques, validation through modelling, and future challenges},
  author={Sebastiani M, Sui T & Korsunsky AM},
  journal={MATERIALS & DESIGN},
  volume={118},
  pages={204-206},
  year = "2017"
}

BibTeX

@article{insituandoperan-2017/3,
  title={In situ and operando studies of structural and functional materials and systems using electron, ion and X-ray microscopy},
  author={Pandey A, Sui T & Korsunsky AM},
  journal={MATERIALS & DESIGN},
  volume={117},
  pages={445-445},
  year = "2017"
}

BibTeX

@article{eigenstrainreco-2017/3,
  title={Eigenstrain reconstruction of residual strains in an additively manufactured and shot peened nickel superalloy compressor blade},
  author={Salvati E, Lunt AJG, Ying S, Sui T, Zhang H et al.},
  journal={Computer Methods in Applied Mechanics and Engineering},
  volume={320},
  pages={335-351},
  publisher={Elsevier},
  year = "2017"
}

@inproceedings{textureandmicro-2017/3,
  title={Texture and Microstructure Analysis of IN718 Nickel Superalloy Samples Additively Manufactured by Selective Laser Melting},
  author={De Jager B, Zhang B, Song X, Papadaki C, Zhang H et al.},
  booktitle={IMECS},
  pages={734-740},
  year = "2017"
}

@inproceedings{ontheupperandlo-2017/3,
  title={On the upper and lower bounds of correlation window size in digital image correlation analysis},
  author={Zhang H, Senn M, Sui T, Lunt A, Brandt LR et al.},
  booktitle={IMECS},
  pages={456-459},
  year = "2017"
}

@inproceedings{proceedingsofth-2017/3,
  title={Proceedings of the world congress on engineering 2017},
  author={Ao SI, Gelman L, Hukins DWL, Hunter A & Korsunsky AM},
  booktitle={IMECS},
  year = "2017"
}

@inproceedings{proceedingsofth-2017/3,
  title={Proceedings of the international multiconference of engineers and computer scientists 2017},
  author={Ao SI, Castillo O, Douglas C, Dagan Feng D & Korsunsky AM},
  booktitle={IMECS},
  year = "2017"
}

BibTeX

@article{materialsdesign-2017/2,
  title={Materials & Design Virtual Special Issue Editorial: Analysis of material microstructure and defects using X-ray and neutron beams - Size-Strain},
  author={Robinson IK, Korsunsky AM & Sui T},
  journal={MATERIALS & DESIGN},
  volume={116},
  pages={694-695},
  year = "2017"
}

BibTeX

@article{characterisatio-2017/2,
  title={Characterisation of handling and service surface damage on Nickel alloys caused by low velocity impacts of blunt hard objects},
  author={Fleury R, Nowell D, Sui T, Ying S, Korsunsky AM et al.},
  journal={Mechanics of Materials},
  volume={107},
  pages={45-55},
  publisher={Elsevier},
  year = "2017"
}

@inproceedings{anoverviewofthe-2017/1,
  title={An overview of the mechanisms of fatigue crack growth retardation/acceleration following the occurrence of an overload or underload},
  author={Salvati E & Korsunsky AM},
  pages={141-142},
  year = "2017"
}

@inproceedings{microstructural-2017/1,
  title={Microstructural variations during interrupted creep tests on P/M polycrystalline nickel-base superalloy},
  author={Papadaki C, Li W, Ying S, Salvati E, Zhang H et al.},
  pages={1122-1124},
  year = "2017"
}

@inproceedings{damagecascadean-2017/1,
  title={Damage cascade and capacity fading in Li-ion battery cathodes},
  author={Korsunsky AM & Sui T},
  pages={213-214},
  year = "2017"
}

@inproceedings{atomisticsimula-2017/1,
  title={Atomistic simulation of cracks versus generalized continua},
  author={Mousavi M, Guénolé J, Baranova P, Bitzek E & Korsunsky AM},
  pages={259-260},
  year = "2017"
}

BibTeX

@article{probingthenanos-2017/1,
  title={Probing the nano-scale architecture of diamond-patterned electrospun fibre mats by synchrotron small angle X-ray scattering},
  author={Sui T, Titov K, Ying S, Zhang H, Dolbnya IP et al.},
  journal={RSC Advances},
  volume={7},
  pages={8200-8204},
  publisher={Royal Society of Chemistry},
  year = "2017"
}

BibTeX

@article{correctionprobi-2017/1,
  title={Correction: Probing the nano-scale architecture of diamond-patterned electrospun fibre mats by synchrotron small angle X-ray scattering},
  author={Sui T, Titov K, Ying S, Zhang H, Dolbnya IP et al.},
  journal={RSC Adv.},
  year = "2017"
}

BibTeX

@article{highresolutioni-2017/,
  title={High resolution imaging and analysis of residual elastic strain in an additively manufactured turbine blade},
  author={Kirkwood HJ, Zhang SY, Tremsin AS, Sui T, Korsunsky AM et al.},
  journal={INTERNATIONAL JOURNAL OF NANOTECHNOLOGY},
  volume={14},
  pages={166-178},
  year = "2017"
}

@book{teachingessayon-2017/,
  title={Teaching Essay on Residual Stresses and Eigenstrains},
  author={Korsunsky AM & Korsunsky AM},
  year = "2017"
}

BibTeX

@article{onthefragmentat-2016/12,
  title={On the fragmentation of active material secondary particles in lithium ion battery cathodes induced by charge cycling},
  author={Sun G, Sui T, Song B, Zheng H, Lu L et al.},
  journal={EXTREME MECHANICS LETTERS},
  volume={9},
  pages={449-458},
  year = "2016"
}

BibTeX

@article{elucidatingthem-2016/12,
  title={Elucidating the Mechanism of Fatigue Crack Acceleration Following the Occurrence of an Underload},
  author={Salvati E, Sui T, Zhang H, Lunt AJG, Fong KS et al.},
  journal={ADVANCED ENGINEERING MATERIALS},
  volume={18},
  pages={2076-2087},
  year = "2016"
}

BibTeX

@article{quantifyingeige-2016/12,
  title={Quantifying eigenstrain distributions induced by focused ion beam damage in silicon},
  author={Korsunsky AM, Guenole J, Salvati E, Sui T, Mousavi M et al.},
  journal={MATERIALS LETTERS},
  volume={185},
  pages={47-49},
  year = "2016"
}

BibTeX

@article{areviewofgeomet-2016/10,
  title={A review of geometrical and microstructural size effects in micro-scale deformation processing of metallic alloy components},
  author={Fu MW, Wang JL & Korsunsky A},
  journal={International Journal of Machine Tools and Manufacture},
  volume={109},
  pages={94-125},
  publisher={Elsevier},
  year = "2016"
}

BibTeX

@article{separatingplast-2016/10,
  title={Separating plasticity-induced closure and residual stress contributions to fatigue crack retardation following an overload},
  author={Salvati E, Zhang H, Soon Fong K, Song X & Korsunsky A},
  journal={Journal of the Mechanics and Physics of Solids},
  volume={98},
  pages={222-235},
  publisher={Elsevier},
  year = "2016"
}

BibTeX

@article{operandoobserva-2016/9,
  title={Operando observation of the Taylor cone during electrospinning by multiple synchrotron X-ray techniques},
  author={Sui T, Ying S, Titov K, Dolbnya IP, Tan J-C et al.},
  journal={Materials and Design},
  volume={110},
  pages={933-934},
  publisher={Elsevier},
  year = "2016"
}

BibTeX

@article{anasuperionicco-2016/8,
  title={A Na+ superionic conductor for room-temperature sodium batteries},
  author={Song S, Duong HM, Korsunsky A, Hu N & Lu L},
  journal={Scientific Reports},
  volume={6},
  number={32330},
  publisher={Nature Research},
  year = "2016"
}

BibTeX

@article{experimentaland-2016/8,
  title={Experimental and modelling characterisation of residual stresses in cylindrical samples of rapidly cooled bulk metallic glass},
  author={Korsunsky AM, Sui T, Salvati E, George EP & Sebastiani M},
  journal={MATERIALS & DESIGN},
  volume={104},
  pages={235-241},
  year = "2016"
}

BibTeX

@article{strengtheningme-2016/7,
  title={Strengthening mechanisms in an Al-Fe-Cr-Ti nano-quasicrystalline alloy and composites},
  author={Pedrazzini S, Galano M, Audebert F, Collins DM, Hofmann F et al.},
  journal={Materials Science and Engineering A},
  publisher={Elsevier},
  year = "2016"
}

BibTeX

@article{materialsdesign-2016/6,
  title={Materials & Design Virtual Special Issue: Recent advances in materials for sports technology},
  author={Dasari A, Chen Z, Huang W, Sui T & Korsunsky AM},
  journal={Materials and Design},
  volume={99},
  pages={592-593},
  year = "2016"
}

BibTeX

@article{operandoxrayabs-2016/6,
  title={Operando X-ray Absorption Spectroscopy Study of Atomic Phase Reversibility with Wavelet Transform in the Lithium-Rich Manganese Based Oxide Cathode},
  author={Kim T, Song B, Lunt AJG, Cibin G, Dent AJ et al.},
  journal={Chemistry of Materials},
  volume={28},
  pages={4191-4203},
  publisher={American Chemical Society},
  year = "2016"
}

BibTeX

@article{astudyofoverloa-2016/4,
  title={A study of overload effect on fatigue crack propagation using EBSD, FIB-DIC and FEM methods},
  author={Salvati E, O’Connor S, Sui T, Nowell D & Korsunsky A},
  journal={Engineering Fracture Mechanics},
  volume={167},
  pages={210-223},
  publisher={Elsevier},
  year = "2016"
}

BibTeX

@article{understandingna-2016/3,
  title={Understanding nature's residual strain engineering at the human dentine-enamel junction interface.},
  author={Sui T, Lunt AJG, Baimpas N, Sandholzer MA, Li T et al.},
  journal={Acta biomaterialia},
  volume={32},
  pages={256-263},
  year = "2016"
}

BibTeX

@article{highliionconduc-2016/3,
  title={High Li ion conductivity in a garnet-type solid electrolyte via unusual site occupation of the doping Ca ions},
  author={Song S, Sheptyakov D, Korsunsky AM, Duong HM & Lu L},
  journal={MATERIALS & DESIGN},
  volume={93},
  pages={232-237},
  year = "2016"
}

BibTeX

@article{uncertaintyquan-2016/3,
  title={Uncertainty quantification of residual stress evaluation by the FIB–DIC ring-core method due to elastic anisotropy effects},
  author={Salvati E, Sui T & Korsunsky A},
  journal={International Journal of Solids and Structures},
  volume={87},
  pages={61-69},
  publisher={Elsevier},
  year = "2016"
}

BibTeX

@article{inoperandoxraya-2016/3,
  title={In operando X-ray absorption spectroscopy study of charge rate effects on the atomic environment in graphene-coated Li-rich mixed oxide cathode},
  author={Kim T, Song B, Lunt AJG, Cibin G, Dent AJ et al.},
  journal={Materials & Design},
  volume={98},
  pages={231-242},
  publisher={Elsevier},
  year = "2016"
}

BibTeX

@article{fullinplanestra-2016/3,
  title={Full in-plane strain tensor analysis using the microscale ring-core FIB milling and DIC approach},
  author={Lunt AJG, Salvati E, Ma L, Dolbyna IP, Neo TK et al.},
  journal={Journal of the Mechanics and Physics of Solids},
  volume={94},
  pages={47-67},
  publisher={Elsevier},
  year = "2016"
}

BibTeX

@article{theinfluenceofw-2016/2,
  title={The influence of welding procedure and plate geometry on residual stresses in thick components},
  author={Kartal ME, Kang Y-H, Korsunsky AM, Cocks ACF & Bouchard JP},
  journal={INTERNATIONAL JOURNAL OF SOLIDS AND STRUCTURES},
  volume={80},
  pages={420-429},
  year = "2016"
}

BibTeX

@article{theeffectofeige-2016/2,
  title={The effect of eigenstrain induced by ion beam damage on the apparent strain relief in FIB-DIC residual stress evaluation},
  author={Salvati E, Sui T, Lunt AJG & Korsunsky AM},
  journal={MATERIALS & DESIGN},
  volume={92},
  pages={649-658},
  year = "2016"
}

BibTeX

@article{editorialvirtua-2016/2,
  title={Editorial — Virtual special issue on materials for energy efficient transport},
  author={Bowen C, Ting V, Sui T & Korsunsky A},
  journal={Materials & Design},
  volume={97},
  pages={444},
  publisher={Elsevier},
  year = "2016"
}

BibTeX

@article{multiscalechara-2016/1,
  title={Multi-scale Characterisation of the 3D Microstructure of a Thermally-Shocked Bulk Metallic Glass Matrix Composite.},
  author={Zhang W, Bodey AJ, Sui T, Kockelmann W, Rau C et al.},
  journal={Scientific reports},
  volume={6},
  pages={18545},
  year = "2016"
}

BibTeX

@article{emergingmateria-2016/1,
  title={Emerging material experiences},
  author={Karana E, Pedgley O, Rognoli V & Korsunsky A},
  journal={MATERIALS & DESIGN},
  volume={90},
  pages={1248-1250},
  year = "2016"
}

BibTeX

@article{mitigatedphaset-2016/1,
  title={Mitigated phase transition during first cycle of a Li-rich layered cathode studied by in operando synchrotron X-ray powder diffraction},
  author={Song B, Day SJ, Sui T, Lu L, Tang CC et al.},
  journal={Physical Chemistry Chemical Physics: PCCP},
  volume={18},
  pages={4745-4752},
  publisher={Royal Society of Chemistry},
  year = "2016"
}

@inproceedings{synchrotronxray-2016/1,
  title={Synchrotron X-ray diffraction analysis of bending strains in magnesium alloy AZ31B processed by severe plastic deformation},
  author={Zhang H, Fong KS, Song X, Ying S, Salvati E et al.},
  pages={685-690},
  year = "2016"
}

@inproceedings{fractographyoff-2016/1,
  title={Fractography of fatigue cracks in aluminium alloy AA7050 subjected to interrupted ageing and retro-ageing heat treatments},
  author={Carvaiho ALM, Martins JP, Salvati E, Sui T & Korsunsky AM},
  pages={679-684},
  year = "2016"
}

@inproceedings{effectofptdepos-2016/1,
  title={Effect of Pt deposition on digital image correlation analysis for residual stress measurement using FIB-DIC ringcore method},
  author={Zhang H, Salvati E, Ying S, Lunt A, Sui T et al.},
  pages={838-842},
  year = "2016"
}

@inproceedings{reviewofthehybr-2016/1,
  title={Review of the hybrid finite-discrete element method (FDEM)},
  author={Sun G, Sui T & Korsunsky AM},
  pages={843-847},
  year = "2016"
}

BibTeX

@inproceedings{residualstressm-2016/,
  title={Residual Stress Measurement on Shot Peened Samples Using FIB-DIC},
  author={Salvati E, Benedetti M, Sui T & Korsunsky AM},
  pages={275-283},
  year = "2016"
}

BibTeX

@inproceedings{investigationof-2016/,
  title={Investigation of microstructure within metal welds by energy resolved neutron imaging},
  author={Tremsin AS, Kockelmann W, Paradowska AM, Zhang S-Y, Korsunsky AM et al.},
  year = "2016"
}

BibTeX

@inproceedings{fatigueandfract-2016/,
  title={Fatigue and Fracture behaviour of AZ3 1b Mg alloy plastically deformed by Constrained Groove Pressing in the Presence of Overloads},
  author={Salvati E, Zhang H, Fong KS, Paynter RJH, Song X et al.},
  pages={3772-3781},
  year = "2016"
}

BibTeX

@inproceedings{cracksurfacemor-2016/,
  title={Crack surface morphology and grain misorientation in fatigued aluminium alloy AA7050 samples after interrupted ageing and retrogression-reageing treatments},
  author={Carvalho ALM, Martins JP, Salvati E, Sui T & Korsunsky AM},
  pages={3697-3704},
  year = "2016"
}

BibTeX

@article{tensilesecondar-2015/12,
  title={Tensile secondary creep rate analysis of a dental veneering porcelain},
  author={Lunt AJG, Kabra S, Kelleher J, Zhang SY, Neo TK et al.},
  journal={THIN SOLID FILMS},
  volume={596},
  pages={269-276},
  year = "2015"
}

BibTeX

@article{acomparativetra-2015/12,
  title={A comparative transmission electron microscopy, energy dispersive x-ray spectroscopy and spatially resolved micropillar compression study of the yttria partially stabilised zirconia - porcelain interface in dental prosthesis},
  author={Lunt AJG, Mohanty G, Ying S, Dluhos J, Sui T et al.},
  journal={THIN SOLID FILMS},
  volume={596},
  pages={222-232},
  year = "2015"
}

BibTeX

@article{planedeformatio-2015/12,
  title={Plane deformation of circular inhomogeneous inclusion problems with non-uniform symmetrical dilatational eigenstrain},
  author={Ma L, Wang B & Korsunsky AM},
  journal={MATERIALS & DESIGN},
  volume={86},
  pages={809-817},
  year = "2015"
}

BibTeX

@article{nonsingularanti-2015/12,
  title={Non-singular antiplane fracture theory within nonlocal anisotropic elasticity},
  author={Mousavi SM & Korsunsky AM},
  journal={MATERIALS & DESIGN},
  volume={88},
  pages={854-861},
  year = "2015"
}

BibTeX

@article{materialsdesign-2015/12,
  title={Materials & Design Cover Image: "Roman brick wall" cracking of a thin coating},
  author={Lunt AJG, Baimpas N, Le Bourhis E & Korsunsky AM},
  journal={MATERIALS & DESIGN},
  volume={88},
  pages={1210-1212},
  year = "2015"
}

BibTeX

@article{editorialnoteon-2015/12,
  title={Editorial note - On the aims & scope and priority areas in Materials & Design},
  author={Korsunsky AM, Gibson AG, Nguyen GD, Sebastiani M, Song X et al.},
  journal={MATERIALS & DESIGN},
  volume={88},
  pages={1377-1380},
  year = "2015"
}

BibTeX

@article{areviewofmicros-2015/12,
  title={A review of micro-scale focused ion beam milling and digital image correlation analysis for residual stress evaluation and error estimation},
  author={Lunt AJG & Korsunsky AM},
  journal={SURFACE & COATINGS TECHNOLOGY},
  volume={283},
  pages={373-388},
  year = "2015"
}

BibTeX

@article{analysisofincre-2015/12,
  title={Analysis of increasing torque with recurrent slip in interference-fits},
  author={McMillan MD, Booker JD, Smith DJ, Fedorciuc Onisa C, Korsunsky A et al.},
  journal={Engineering Failure Analysis},
  volume={62},
  pages={58-74},
  publisher={Elsevier},
  year = "2015"
}

BibTeX

@article{astateoftheartr-2015/10,
  title={A state-of-the-art review of micron-scale spatially resolved residual stress analysis by FIB-DIC ring-core milling and other techniques},
  author={Lunt AJG, Baimpas N, Salvati E, Dolbnya IP, Sui T et al.},
  journal={JOURNAL OF STRAIN ANALYSIS FOR ENGINEERING DESIGN},
  volume={50},
  pages={426-444},
  year = "2015"
}

BibTeX

@article{nanoscalechemic-2015/9,
  title={Nanoscale chemical mapping of Li-ion battery cathode material by FIB-SEM and TOF-SIMS multi-modal microscopy},
  author={Sui T, Song B, Dluhos J, Lu L & Korsunsky AM},
  journal={NANO ENERGY},
  volume={17},
  pages={254-260},
  year = "2015"
}

BibTeX

@article{xraystudyofhuma-2015/7,
  title={X-ray Study of Human Dental Tissues Affected by Erythroblastosis Fetalis.},
  author={Sui T, Ying S, Korsunsky AM & Landini G},
  journal={Journal of dental research},
  volume={94},
  pages={1004-1010},
  year = "2015"
}

BibTeX

@article{lauedicanewmeth-2015/7,
  title={Laue-DIC: a new method for improved stress field measurements at the micrometer scale.},
  author={Petit J, Castelnau O, Bornert M, Zhang FG, Hofmann F et al.},
  journal={Journal of synchrotron radiation},
  volume={22},
  pages={980-994},
  year = "2015"
}

BibTeX

@article{imagingtransien-2015/6,
  title={Imaging transient melting of a nanocrystal using an X-ray laser.},
  author={Clark JN, Beitra L, Xiong G, Fritz DM, Lemke HT et al.},
  journal={Proceedings of the National Academy of Sciences of the United States of America},
  volume={112},
  pages={7444-7448},
  year = "2015"
}

BibTeX

@article{structuremorpho-2015/4,
  title={Structure-morphology correlation in electrospun fibers of semicrystalline polymers by simultaneous synchrotron SAXS-WAXD},
  author={Gazzano M, Gualandi C, Zucchelli A, Sui T, Korsunsky AM et al.},
  journal={POLYMER},
  volume={63},
  pages={154-163},
  year = "2015"
}

BibTeX

@article{residualstresse-2015/4,
  title={Residual stresses and microstructure in Powder Bed Direct Laser Deposition (PB DLD) samples},
  author={Song X, Xie M, Hofmann F, Illston T, Connolley T et al.},
  journal={International Journal of Material Forming},
  volume={8},
  pages={245-254},
  year = "2015"
}

BibTeX

@article{explicitformula-2015/3,
  title={Explicit formulae for the internal stress in spherical particles of active material within lithium ion battery cathodes during charging and discharging},
  author={Korsunsky AM, Sui T & Song B},
  journal={MATERIALS & DESIGN},
  volume={69},
  pages={247-252},
  year = "2015"
}

BibTeX

@article{multiplelengths-2015/3,
  title={Multiple-length-scale deformation analysis in a thermoplastic polyurethane.},
  author={Sui T, Baimpas N, Dolbnya IP, Prisacariu C & Korsunsky AM},
  journal={Nature communications},
  volume={6},
  pages={6583-6583},
  year = "2015"
}

BibTeX

@article{anonlocalcouple-2015/1,
  title={A nonlocal coupled damage-plasticity model for the analysis of ductile failure},
  author={Nguyen GD, Korsunsky AM & Belnoue JP-H},
  journal={INTERNATIONAL JOURNAL OF PLASTICITY},
  volume={64},
  pages={56-75},
  year = "2015"
}

@inproceedings{multibeamengine-2015/1,
  title={Multi-beam engineering microscopy - A versatile tool for optimal materials design},
  author={Korsunsky AM, Sui T, Dluhoš J, Ying S, Lunt AJG et al.},
  pages={746-749},
  year = "2015"
}

@inproceedings{fibsemserialsec-2015/1,
  title={FIB-SEM serial sectioning nanotomography of flax fibres},
  author={Sui T, Zhang H, Ying S, O'Brien P & Korsunsky AM},
  pages={815-818},
  year = "2015"
}

@inproceedings{aninvestigation-2015/1,
  title={An investigation of residual stress gradient effects in FIB-DIC micro-ring-core analysis},
  author={Salvati E, Lunt AJG, Sui T & Korsunsky AM},
  pages={771-774},
  year = "2015"
}

BibTeX

@article{nanostructuralc-2015/,
  title={Nano-structural changes in Li-ion battery cathodes during cycling revealed by FIB-SEM serial sectioning tomography},
  author={Song B, Sui T, Ying S, Li L, Lu L et al.},
  journal={JOURNAL OF MATERIALS CHEMISTRY A},
  volume={3},
  pages={18171-18179},
  year = "2015"
}

BibTeX

@inproceedings{investigationof-2015/,
  title={Investigation of Martensite Transformation in 316L Stainless Steel},
  author={Zhang SY, Compagnon E, Godin B & Korsunsky AM},
  pages={251-260},
  year = "2015"
}

BibTeX

@inproceedings{neutronstrainto-2015/,
  title={Neutron Strain Tomography using the Radon Transform},
  author={Kirkwood HJ, Zhang SY, Tremsin AS, Korsunsky AM, Baimpas N et al.},
  pages={414-423},
  year = "2015"
}

BibTeX

@inproceedings{microscaleresol-2015/,
  title={Microscale resolution fracture toughness profiling at the zirconia-porcelain interface in dental prostheses},
  author={Lunt AJG, Mohanty G, Neo TK, Michler J & Korsunsky AM},
  year = "2015"
}

@inproceedings{multimodalmicro-2015/,
  title={Multi-modal Microscopy Characterisation of Nodal Markings in Flax Fibre},
  author={Zhang H, Sui T, Thygesen LG, O'Brien P & Korsunsky AM},
  pages={1011-1015},
  year = "2015"
}

@inproceedings{anelectronmicro-2015/,
  title={An Electron Microscopy Study of Sintering in Three Dental Porcelains},
  author={Lunt AJG, Neo TK & Korsunsky AM},
  pages={1005-1010},
  year = "2015"
}

BibTeX

@article{acriticalcompar-2014/12,
  title={A critical comparison between XRD and FIB residual stressmeasurement techniques in thin films},
  author={Bemporad E, Brisotto M, Depero LE, Gelfi M, Korsunsky AM et al.},
  journal={THIN SOLID FILMS},
  volume={572},
  pages={224-231},
  year = "2014"
}

BibTeX

@article{theprincipleofe-2014/12,
  title={The principle of equivalent eigenstrain for inhomogeneous inclusion problems},
  author={Ma L & Korsunsky AM},
  journal={INTERNATIONAL JOURNAL OF SOLIDS AND STRUCTURES},
  volume={51},
  pages={4477-4484},
  year = "2014"
}

BibTeX

@article{nanoscalemappin-2014/11,
  title={Nano-scale mapping of lattice strain and orientation inside carbon core SIC fibres by synchrotron X-ray diffraction},
  author={Baimpas N, Lunt AJG, Dolbnya IP, Dluhos J & Korsunsky AM},
  journal={CARBON},
  volume={79},
  pages={85-92},
  year = "2014"
}

BibTeX

@article{finescaletribol-2014/10,
  title={Fine-scale tribological performance of zeolitic imidazolate framework (ZIF-8) based polymer nanocomposite membranes},
  author={Khun NW, Mahdi EM, Ying S, Sui T, Korsunsky A et al.},
  journal={APL Materials},
  volume={2},
  pages={124101-124101},
  publisher={American Institute of Physics},
  year = "2014"
}

BibTeX

@article{discussiononint-2014/9,
  title={Discussion on "Interfacial Residual Stress Analysis of Thermal Spray Coatings by Miniature Ring-Core Cutting Combined with DIC Method" by JG Zhu et al., Experimental Mechanics DOI:10.1007/s11340-012-9640-2},
  author={Sebastiani M, Korsunsky AM, Eberl C, Bemporad E & Pharr GM},
  journal={EXPERIMENTAL MECHANICS},
  volume={54},
  pages={1305-1306},
  year = "2014"
}

BibTeX

@article{calculationsofs-2014/8,
  title={Calculations of single crystal elastic constants for yttria partially stabilised zirconia from powder diffraction data},
  author={Lunt AJG, Xie MY, Baimpas N, Zhang SY, Kabra S et al.},
  journal={JOURNAL OF APPLIED PHYSICS},
  volume={116},
  number={ARTN 053509},
  year = "2014"
}

BibTeX

@article{focusedionbeamf-2014/7,
  title={Focused ion beam four-slot milling for Poisson's ratio and residual stress evaluation at the micron scale},
  author={Sebastiani M, Eberl C, Bemporad E, Korsunsky AM, Nix WD et al.},
  journal={SURFACE & COATINGS TECHNOLOGY},
  volume={251},
  pages={151-161},
  year = "2014"
}

BibTeX

@article{focusedionbeamf-2014/7,
  title={Focused ion beam four-slot milling for Poisson's ratio and residual stress evaluation at the micron scale},
  author={Sebastiani M, Eberl C, Bemporad E, Korsunsky AM, Nix WD et al.},
  journal={Surface and Coatings Technology},
  volume={251},
  pages={151-161},
  year = "2014"
}

@misc{hierarchicalmod-2014/7,
  title={Hierarchical Modeling of Elastic Behavior
of Human Dental Tissue Based on
Synchrotron Diff raction Characterization},
  author={Sui T & Korsunsky AM},
  year = "2014"
}

BibTeX

@article{insituxrayscatt-2014/6,
  title={In situ X-ray scattering evaluation of heat-induced ultrastructural changes in dental tissues and synthetic hydroxyapatite.},
  author={Sui T, Sandholzer MA, Lunt AJG, Baimpas N, Smith A et al.},
  journal={Journal of the Royal Society, Interface},
  volume={11},
  pages={20130928},
  year = "2014"
}

BibTeX

@article{xrayscatteringe-2014/5,
  title={X-ray scattering evaluation of ultrastructural changes in human dental tissues with thermal treatment.},
  author={Sandholzer MA, Sui T, Korsunsky AM, Walmsley AD, Lumley PJ et al.},
  journal={J Forensic Sci},
  volume={59},
  pages={769-774},
  year = "2014"
}

BibTeX

@misc{hierarchicalmod-2014/5,
  title={Hierarchical Modeling of Elastic Behavior of Human Dental Tissue Based on Synchrotron Diff raction Characterization},
  author={Sui T & Korsunsky AM},
  year = "2014"
}

BibTeX

@article{structuremechan-2014/4,
  title={Structure-mechanical function relations at nano-scale in heat-affected human dental tissue.},
  author={Sui T, Sandholzer MA, Le Bourhis E, Baimpas N, Landini G et al.},
  journal={J Mech Behav Biomed Mater},
  volume={32},
  pages={113-124},
  year = "2014"
}

BibTeX

@article{diametricalgrow-2014/3,
  title={Diametrical growth in the forward flow forming process: Simulation, validation, and prediction},
  author={Song X, Fong KS, Oon SR, Tiong WR, Li PF et al.},
  journal={International Journal of Advanced Manufacturing Technology},
  volume={71},
  pages={207-217},
  year = "2014"
}

BibTeX

@article{hierarchicalmod-2014/1,
  title={Hierarchical modelling of in situ elastic deformation of human enamel based on photoelastic and diffraction analysis of stresses and strains.},
  author={Sui T, Lunt AJG, Baimpas N, Sandholzer MA, Hu J et al.},
  journal={Acta Biomater},
  volume={10},
  pages={343-354},
  year = "2014"
}

BibTeX

@article{hierarchicalmod-2014/1,
  title={Hierarchical modelling of in situ elastic deformation of human enamel based on photoelastic and diffraction analysis of stresses and strains},
  author={Sui T, Lunt AJG, Baimpas N, Sandholzer MA, Hu J et al.},
  journal={Acta Biomaterialia},
  volume={10},
  pages={343-354},
  year = "2014"
}

BibTeX

@article{aconstitutivemo-2014/1,
  title={A constitutive modelling framework featuring two scales of behaviour: Fundamentals and applications to quasi-brittle failure},
  author={Nguyen GD, Korsunsky AM & Einav I},
  journal={Engineering Fracture Mechanics},
  volume={115},
  pages={221-240},
  year = "2014"
}

BibTeX

@article{xrayscatteringe-2014/1,
  title={X-ray scattering evaluation of ultrastructural changes in human dental tissues with thermal treatment},
  author={Sandholzer MA, Sui T, Korsunsky AM, Damien Walmsley A, Lumley PJ et al.},
  journal={Journal of Forensic Sciences},
  volume={59},
  pages={769-774},
  year = "2014"
}

BibTeX

@article{discussiononint-2014/1,
  title={Discussion on "Interfacial Residual Stress Analysis of Thermal Spray Coatings by Miniature Ring-Core Cutting Combined with DIC Method" by J.G. Zhu et al., Experimental Mechanics DOI:10.1007/s11340-012-9640-2},
  author={Sebastiani M, Korsunsky AM, Eberl C, Bemporad E & Pharr GM},
  journal={Experimental Mechanics},
  volume={54},
  pages={1305-1306},
  year = "2014"
}

@inproceedings{imaginglatticed-2014/1,
  title={Imaging Lattice dynamics in individual nanocrystals},
  author={Clark JN, Beitra L, Xiong G, Higginbotham A, Fritz DM et al.},
  year = "2014"
}

@inproceedings{onthecyclicdefo-2014/1,
  title={On the cyclic deformation and residual stress in Ni-base single crystal superalloys},
  author={Ying S, Sui T, Lunt AJG, Reed RC & Korsunsky AM},
  pages={1321-1326},
  year = "2014"
}

@inproceedings{structureproper-2014/1,
  title={Structure-property characterization of the dentine-enamel junction (DEJ)},
  author={Sui T, Li T, Sandholzer MA, Bourhis EL, Zeng K et al.},
  pages={1529-1534},
  year = "2014"
}

@inproceedings{astudyofphasetr-2014/1,
  title={A study of phase transformation at the surface of a zirconia ceramic},
  author={Roberts O, Lunt AJG, Ying S, Sui T, Baimpas N et al.},
  pages={1173-1177},
  year = "2014"
}

@article{structuremechan-2014/1,
  title={Structure-mechanical function relations at nano-scale in heat-affected human dental tissue.},
  author={Sui T, Sandholzer MA, Le Bourhis E, Baimpas N, Landini G et al.},
  journal={Journal of the mechanical behavior of biomedical materials},
  volume={32},
  pages={113-124},
  year = "2014"
}

BibTeX

@inproceedings{acriticalcompar-2014/1,
  title={A critical comparison between XRD and FIB residual stress measurement techniques in thin films},
  author={Bemporad E, Brisotto M, Depero LE, Gelfi M, Korsunsky AM et al.},
  pages={224-231},
  year = "2014"
}

BibTeX

@article{nanoscalemappin-2014/1,
  title={Nano-scale mapping of lattice strain and orientation inside carbon core SiC fibres by synchrotron X-ray diffraction},
  author={Baimpas N, Lunt AJG, Dolbnya IP, Dluhos J & Korsunsky AM},
  journal={Carbon},
  volume={79},
  pages={85-92},
  year = "2014"
}

BibTeX

@inproceedings{nanoscalethermo-2014/1,
  title={Nano-scale thermo-mechanical structure-property relationships in human dental tissues studied by nanoindentation and synchrotron X-ray scattering},
  author={Sui T, Sandholzer MA, Bourhis EL, Baimpas N, Landini G et al.},
  pages={251-254},
  year = "2014"
}

@inproceedings{acomparativespe-2014/1,
  title={A comparative spectroscopic study of graphene-coated vs pristine Li(Mn,Ni,Co) oxide materials for lithium-ion battery cathodes},
  author={Kim T, Song B, Cibin G, Dent A, Li L et al.},
  year = "2014"
}

@inproceedings{hierarchicalmod-2014/1,
  title={Hierarchical modelling and X-ray analysis of human dentine and enamel},
  author={Sui T, Sandholzer MA, Baimpas N, Lunt AJG, Dolbnya IP et al.},
  pages={524-528},
  year = "2014"
}

BibTeX

@inproceedings{imaginglatticed-2014/1,
  title={Imaging Lattice dynamics in individual nanocrystals},
  author={Clark JN, Beitra L, Xiong G, Higginbotham A, Fritz DM et al.},
  year = "2014"
}

BibTeX

@article{residualstresse-2014/1,
  title={Residual stresses and microstructure in Powder Bed Direct Laser Deposition (PB DLD) samples},
  author={Song X, Xie M, Hofmann F, Illston T, Connolley T et al.},
  journal={International Journal of Material Forming},
  pages={1-10},
  year = "2014"
}

BibTeX

@misc{highenergytrans-2014/1,
  title={High-energy transmission laue (HETL) micro-beam diffraction},
  author={Hofmann F & Korsunsky AM},
  year = "2014"
}

BibTeX

@inproceedings{intragranularre-2014/,
  title={Intragranular Residual Stress Evaluation Using the Semi-Destructive FIB-DIC Ring-Core Drilling Method},
  author={Lunt AJG & Korsunsky AM},
  pages={8-13},
  year = "2014"
}

BibTeX

@inproceedings{stressevaluatio-2013/12,
  title={Stress evaluation in thin films: Micro-focus synchrotron X-ray diffraction combined with focused ion beam patterning for d<inf>o</inf> evaluation},
  author={Baimpas N, Le Bourhis E, Eve S, Thiaudière D, Hardie C et al.},
  pages={245-250},
  year = "2013"
}

BibTeX

@article{deepreactiveion-2013/12,
  title={Deep reactive ion etching of silicon moulds for the fabrication of diamond x-ray focusing lenses},
  author={Malik AM, Fox OJL, Alianelli L, Korsunsky AM, Stevens R et al.},
  journal={Journal of Micromechanics and Microengineering},
  volume={23},
  year = "2013"
}

@inproceedings{numericalsimula-2013/12,
  title={Numerical simulation and experimental validation of texture in extruded wires of a BCC metal},
  author={Xie M, Baimpas N, Reinhard C & Korsunsky AM},
  pages={103-110},
  year = "2013"
}

BibTeX

@article{hierarchicalmod-2013/11,
  title={Hierarchical modelling of elastic behaviour of human enamel based on synchrotron diffraction characterisation.},
  author={Sui T, Sandholzer MA, Baimpas N, Dolbnya IP, Landini G et al.},
  journal={J Struct Biol},
  volume={184},
  pages={136-146},
  year = "2013"
}

BibTeX

@article{diametricalgrow-2013/11,
  title={Diametrical growth in the forward flow forming process: simulation, validation, and prediction},
  author={Song X, Fong K, Oon SR, Tiong WR, Li P et al.},
  journal={International Journal of Advanced Manufacturing Technology},
  pages={1-11},
  year = "2013"
}

BibTeX

@article{hierarchicalmod-2013/11,
  title={Hierarchical modelling of elastic behaviour of human enamel based on synchrotron diffraction characterisation},
  author={Sui T, Sandholzer MA, Baimpas N, Dolbnya IP, Landini G et al.},
  journal={Journal of Structural Biology},
  volume={184},
  pages={136-146},
  year = "2013"
}

BibTeX

@article{grainrefinement-2013/10,
  title={Grain refinement and fatigue strengthening mechanisms in as-extruded Mg-6Zn-0.5Zr and Mg-10Gd-3Y-0.5Zr magnesium alloys by shot peening},
  author={Liu W, Wu G, Zhai C, Ding W & Korsunsky AM},
  journal={International Journal of Plasticity},
  volume={49},
  pages={16-35},
  year = "2013"
}

BibTeX

@article{textureanalysis-2013/10,
  title={Texture analysis in cubic phase polycrystals by single exposure synchrotron X-ray diffraction},
  author={Xie MY, Baimpas N, Reinhard C & Korsunsky AM},
  journal={Journal of Applied Physics},
  volume={114},
  year = "2013"
}

BibTeX

@article{threedimensiona-2013/9,
  title={Three-dimensional crack observation, quantification and simulation in a quasi-brittle material},
  author={Mostafavi M, Baimpas N, Tarleton E, Atwood RC, McDonald SA et al.},
  journal={Acta Materialia},
  volume={61},
  pages={6276-6289},
  year = "2013"
}

BibTeX

@article{analysisofprefe-2013/9,
  title={Analysis of preferred orientations in linear friction welded (LFW) aluminium alloy specimens using one-shot multi-element energy dispersive synchrotron x-ray diffraction},
  author={Xie MY, Jun TS, Korsunsky AM & Drakopoulos M},
  journal={Powder Diffraction},
  volume={28},
  year = "2013"
}

BibTeX

@article{theapplicationo-2013/9,
  title={The application of geometry corrections for diffraction strain tomography (DST) analysis of a Ni-base superalloy blade},
  author={Baimpas N, Xie M, Reinhard C & Korsunsky AM},
  journal={Powder Diffraction},
  volume={28},
  year = "2013"
}

BibTeX

@article{multiscalemodel-2013/8,
  title={Multiscale modelling and diffraction-based characterization of elastic behaviour of human dentine.},
  author={Sui T, Sandholzer MA, Baimpas N, Dolbnya IP, Walmsley A et al.},
  journal={Acta Biomater},
  volume={9},
  pages={7937-7947},
  year = "2013"
}

BibTeX

@article{symbolicandnume-2013/8,
  title={Symbolic and numerical solution of the axisymmetric indentation problem for a multilayered elastic coating},
  author={Constantinescu A, Korsunsky AM, Pison O & Oueslati A},
  journal={International Journal of Solids and Structures},
  volume={50},
  pages={2798-2807},
  year = "2013"
}

BibTeX

@article{fundamentalform-2013/8,
  title={Fundamental formulation for transformation toughening in anisotropic solids},
  author={Ma L, Korsunsky AM & McMeeking RM},
  journal={Journal of Applied Mechanics, Transactions ASME},
  volume={80},
  year = "2013"
}

BibTeX

@article{ultrafastthreed-2013/7,
  title={Ultrafast three-dimensional imaging of lattice dynamics in individual gold nanocrystals.},
  author={Clark JN, Beitra L, Xiong G, Higginbotham A, Fritz DM et al.},
  journal={Science},
  volume={341},
  pages={56-59},
  year = "2013"
}

BibTeX

@article{afeasibilitystu-2013/3,
  title={A feasibility study of dynamic stress analysis inside a running internal combustion engine using synchrotron X-ray beams.},
  author={Baimpas N, Drakopoulos M, Connolley T, Song X, Pandazaras C et al.},
  journal={J Synchrotron Radiat},
  volume={20},
  pages={316-323},
  year = "2013"
}

BibTeX

@article{afeasibilitystu-2013/3,
  title={A feasibility study of dynamic stress analysis inside a running internal combustion engine using synchrotron X-ray beams},
  author={Baimpas N, Drakopoulos M, Connolley T, Song X, Pandazaras C et al.},
  journal={Journal of Synchrotron Radiation},
  volume={20},
  pages={316-323},
  year = "2013"
}

@article{feasibilitystud-2013/1,
  title={Feasibility study of synchrotron x-ray diffraction and absorption spectroscopy for the characterisation of NMC oxides for Li-ion battery cathodes},
  author={Kim T, Bohang S, Baimpas N, Mocuta C, Thiaudiere D et al.},
  journal={Lecture Notes in Engineering and Computer Science},
  volume={2203},
  pages={747-753},
  year = "2013"
}

@article{ultrastructural-2013/1,
  title={Ultrastructural changes in burnt dental tissue revealed by synchrotron x-ray scattering},
  author={Sui T, Sandholzer MA, Baimpas N, Landini G, Damien Walmsley  et al.},
  journal={Lecture Notes in Engineering and Computer Science},
  volume={2203},
  pages={775-779},
  year = "2013"
}

BibTeX

@article{multiscalemodel-2013/1,
  title={Multiscale modelling and diffraction-based characterization of elastic behaviour of human dentine},
  author={Sui T, Sandholzer IA, Baimpas I, Dolbnya IP, Walmsley AD et al.},
  journal={Acta Biomaterialia},
  volume={9},
  pages={7937-7947},
  year = "2013"
}

@inproceedings{mechanismsoffai-2013/1,
  title={Mechanisms of failure in porcelain-veneered sintered zirconia restorations},
  author={Sui T, Dragnevski K, Neo TK & Korsunsky AM},
  pages={416-424},
  year = "2013"
}

@inproceedings{multiscalemodel-2013/1,
  title={Multi-scale modeling and diffraction-based characterization of elastic behaviour of human enamel},
  author={Sui T, Sandholzer MA, Baimpas N, Dolbnya I, Landini G et al.},
  pages={311-320},
  year = "2013"
}

BibTeX

@article{residualstresse-2013/1,
  title={Residual stresses in Linear Friction Welding of aluminium alloys},
  author={Song X, Xie M, Hofmann F, Jun TS, Connolley T et al.},
  journal={Materials and Design},
  volume={50},
  pages={360-369},
  year = "2013"
}

BibTeX

@article{grainrefinement-2013/,
  title={Grain refinement and fatigue strengthening mechanisms in as-extruded Mg-6Zn-0.5Zr and Mg-10Gd-3Y-0.5Zr magnesium alloys by shot peening},
  author={Liu W, Wu G, Zhai C, Ding W & Korsunsky AM},
  journal={International Journal of Plasticity},
  year = "2013"
}

BibTeX

@article{threedimensiona-2013/,
  title={Three-dimensional crack observation, quantification and simulation in a quasi-brittle material},
  author={Mostafavi M, Tarleton E, Marrow TJ, Baimpas N, Korsunsky AM et al.},
  journal={Acta Materialia},
  year = "2013"
}

BibTeX

@article{stressevaluatio-2013/,
  title={Stress evaluation in thin films: Micro-focus synchrotron X-ray diffraction combined with focused ion beam patterning for d evaluation},
  author={Baimpas N, Korsunsky AM, Le Bourhis E, Eve S, Thiaudière D et al.},
  journal={Thin Solid Films},
  year = "2013"
}

BibTeX

@article{aconstitutivemo-2013/,
  title={A constitutive modelling framework featuring two scales of behaviour: Fundamentals and applications to quasi-brittle failure},
  author={Nguyen GD, Korsunsky AM & Einav I},
  journal={Engineering Fracture Mechanics},
  year = "2013"
}

@inproceedings{worldcongresson-2013/,
  title={World Congress on Engineering 2013 Preface},
  author={Korsunsky AM},
  pages={XLIV-XLIV},
  year = "2013"
}

BibTeX

@article{richtomographyt-2013/,
  title={RICH TOMOGRAPHY TECHNIQUES FOR THE ANALYSIS OF MICROSTRUCTURE AND DEFORMATION},
  author={Baimpas N, Xie M, Korsunsky AM, Song X, Hofmann F et al.},
  journal={International Journal of Computational Methods},
  pages={1-18},
  year = "2013"
}

BibTeX

@article{diffractionpost-2012/12,
  title={Diffraction post-processing of 3D dislocation dynamics simulations for direct comparison with micro-beam Laue experiments},
  author={Hofmann F, Keegan S & Korsunsky AM},
  journal={MATERIALS LETTERS},
  volume={89},
  pages={66-69},
  year = "2012"
}

BibTeX

@article{surfacedislocat-2012/10,
  title={Surface dislocation nucleation by wedge indenter contacts},
  author={Zhao J, Ma LF & Korsunsky AM},
  journal={Materials Science and Technology (United Kingdom)},
  volume={28},
  pages={1167-1171},
  year = "2012"
}

BibTeX

@article{fundamentalsolu-2012/9,
  title={Fundamental solutions for singularities within a layered solid},
  author={Ma L, Zhao J & Korsunsky AM},
  journal={European Journal of Mechanics, A/Solids},
  volume={35},
  pages={37-46},
  year = "2012"
}

BibTeX

@article{aneigenstrainba-2012/9,
  title={An eigenstrain-based finite element model and the evolution of shot peening residual stresses during fatigue of GW103 magnesium alloy},
  author={Song X, Liu WC, Belnoue JP, Dong J, Wu GH et al.},
  journal={International Journal of Fatigue},
  volume={42},
  pages={284-295},
  year = "2012"
}

BibTeX

@article{howtoconnecttwo-2012/9,
  title={How to connect two scales of behaviour in constitutive modelling of geomaterials},
  author={Nguyen GD, Einav I & Korsunsky AM},
  journal={Geotechnique Letters},
  volume={2},
  pages={129-134},
  year = "2012"
}

BibTeX

@article{analysisofthein-2012/9,
  title={Analysis of the internal structure and lattice (mis)orientation in individual grains of deformed CP nickel polycrystals by synchrotron X-ray micro-diffraction and microscopy},
  author={Korsunsky AM, Hofmann F, Abbey B, Song X, Belnoue JP et al.},
  journal={International Journal of Fatigue},
  volume={42},
  pages={1-13},
  year = "2012"
}

BibTeX

@article{complexvariable-2012/5,
  title={Complex variable formulation for non-slipping plane strain contact of two elastic solids in the presence of interface mismatch eigenstrain},
  author={Ma L & Korsunsky AM},
  journal={INTERNATIONAL JOURNAL OF SOLIDS AND STRUCTURES},
  volume={49},
  pages={1177-1188},
  year = "2012"
}

BibTeX

@article{complexvariable-2012/5,
  title={Complex variable formulation for non-slipping plane strain contact of two elastic solids in the presence of interface mismatch eigenstrain},
  author={Ma L & Korsunsky AM},
  journal={International Journal of Solids and Structures},
  volume={49},
  pages={1177-1188},
  year = "2012"
}

BibTeX

@article{highenergytrans-2012/5,
  title={High-energy transmission Laue micro-beam X-ray diffraction: a probe for intra-granular lattice orientation and elastic strain in thicker samples.},
  author={Hofmann F, Song X, Abbey B, Jun T-S & Korsunsky AM},
  journal={J Synchrotron Radiat},
  volume={19},
  pages={307-318},
  year = "2012"
}

BibTeX

@article{highenergytrans-2012/5,
  title={High-energy transmission Laue micro-beam X-ray diffraction: A probe for intra-granular lattice orientation and elastic strain in thicker samples},
  author={Hofmann F, Song X, Abbey B, Jun TS & Korsunsky AM},
  journal={Journal of Synchrotron Radiation},
  volume={19},
  pages={307-318},
  year = "2012"
}

BibTeX

@article{residualstressc-2012/5,
  title={Residual stress characterization in 12%-Cr steel friction stir welds by neutron diffraction},
  author={Jun T-S, Hofmann F, Hofmann M & Korsunsky AM},
  journal={JOURNAL OF STRAIN ANALYSIS FOR ENGINEERING DESIGN},
  volume={47},
  pages={203-213},
  year = "2012"
}

BibTeX

@article{neutronstrainto-2012/3,
  title={Neutron strain tomography using Bragg-edge transmission},
  author={Abbey B, Zhang SY, Xie M, Song X & Korsunsky AM},
  journal={International Journal of Materials Research},
  volume={103},
  pages={234-241},
  year = "2012"
}

BibTeX

@article{neutronstrainto-2012/2,
  title={Neutron strain tomography using Bragg-edge transmission},
  author={Abbey B, Zhang SY, Xie M, Song X & Korsunsky AM},
  journal={INTERNATIONAL JOURNAL OF MATERIALS RESEARCH},
  volume={103},
  pages={234-241},
  year = "2012"
}

BibTeX

@article{imagingofgrainl-2012/2,
  title={Imaging of grain-level orientation and strain in thicker metallic polycrystals by high energy transmission micro-beam Laue (HETL) diffraction techniques},
  author={Hofmann F, Abbey B, Connor L, Baimpas N, Song X et al.},
  journal={INTERNATIONAL JOURNAL OF MATERIALS RESEARCH},
  volume={103},
  pages={192-199},
  year = "2012"
}

BibTeX

@article{reconstructiono-2012/1,
  title={Reconstruction of axisymmetric strain distributions via neutron strain tomography},
  author={Abbey B, Zhang SY, Vorster W & Korsunsky AM},
  journal={NUCLEAR INSTRUMENTS & METHODS IN PHYSICS RESEARCH SECTION B-BEAM INTERACTIONS WITH MATERIALS AND ATOMS},
  volume={270},
  pages={28-35},
  year = "2012"
}

BibTeX

@article{residualstressm-2012/1,
  title={Residual stress measurement in thin films at sub-micron scale using Focused Ion Beam milling and imaging},
  author={Song X, Yeap KB, Zhu J, Belnoue J, Sebastiani M et al.},
  journal={Thin Solid Films},
  volume={520},
  pages={2073-2076},
  year = "2012"
}

@article{xraytextureanal-2012/1,
  title={X-ray texture analysis and imaging of engineering materials at oxford HEX-lab},
  author={Korsunsky AM, Xie M, Baimpas N & Song X},
  journal={Lecture Notes in Engineering and Computer Science},
  volume={2196},
  pages={1202-1207},
  year = "2012"
}

BibTeX

@article{areviewofrecent-2012/1,
  title={A review of recent in situ deformation studies using synchrotron X-ray (Micro) beams},
  author={Korsunsky AM, Hofmann F, Song X, Abbey B & Baimpas N},
  journal={Micro and Nanosystems},
  volume={4},
  pages={97-105},
  year = "2012"
}

@article{experimentallyv-2012/1,
  title={Experimentally validated numerical modeling of material deformation across the scales: A review},
  author={Korsunsky AM, Song X, Belnoue JP & Hofmann F},
  journal={Lecture Notes in Engineering and Computer Science},
  volume={2196},
  pages={1195-1201},
  year = "2012"
}

BibTeX

@article{combininglauemi-2012/1,
  title={Combining Laue microdiffraction and digital image correlation for improved measurements of the elastic strain field with micrometer spatial resolution},
  author={Petit J, Bornert M, Hofmann F, Robach O, Micha JS et al.},
  journal={Procedia IUTAM},
  volume={4},
  pages={133-143},
  year = "2012"
}

@inproceedings{biomaterialscha-2012/1,
  title={Bio-materials characterization across multiple scales at oxford HEX-lab},
  author={Sui T, Hofmann F, Song X, Tao L, Zeng K et al.},
  pages={1657-1662},
  year = "2012"
}

@article{aneigenstrainba-2012/,
  title={An eigenstrain-based finite element model and the evolution of shot peening residual stresses during fatigue of GW103 magnesium alloy},
  author={Song X, Liu WC, Belnoue JP, Dong J, Wu GH et al.},
  journal={International Journal of Fatigue},
  year = "2012"
}

@article{fundamentalsolu-2012/,
  title={Fundamental solutions for singularities within a layered solid},
  author={Ma L, Zhao J & Korsunsky AM},
  journal={European Journal of Mechanics, A/Solids},
  volume={35},
  pages={37-46},
  year = "2012"
}

BibTeX

@article{adamagefunction-2012/,
  title={A damage function formulation for nonlocal coupled damage-plasticity model of ductile metal alloys},
  author={Belnoue JP & Korsunsky AM},
  journal={EUROPEAN JOURNAL OF MECHANICS A-SOLIDS},
  volume={34},
  pages={63-77},
  year = "2012"
}

@article{processmodellin-2011/12,
  title={Process modelling of Linear Friction Welding (LFW) between Aa2124/Sic <inf>P</inf> composite and unreinforced alloy},
  author={Song X, Baimpas N, Harding S & Korsunsky AM},
  journal={Proceedings of the 4th International Conference on Computational Methods for Coupled Problems in Science and Engineering, COUPLED PROBLEMS 2011},
  pages={1379-1387},
  year = "2011"
}

BibTeX

@article{analysisofstrai-2011/12,
  title={Analysis of strain error sources in micro-beam Laue diffraction},
  author={Hofmann F, Eve S, Belnoue J, Micha J-S & Korsunsky AM},
  journal={NUCLEAR INSTRUMENTS & METHODS IN PHYSICS RESEARCH SECTION A-ACCELERATORS SPECTROMETERS DETECTORS AND ASSOCIATED EQUIPMENT},
  volume={660},
  pages={130-137},
  year = "2011"
}

BibTeX

@article{prefacethemulti-2011/11,
  title={Preface: The multi-disciplinarity of Engineering Science},
  author={Korsunsky AM},
  journal={AIP Conference Proceedings},
  volume={1394},
  pages={1-2},
  year = "2011"
}

BibTeX

@article{improvementoffa-2011/7,
  title={Improvement of fatigue properties by shot peening for Mg-10Gd-3Y alloys under different conditions},
  author={Liu WC, Dong J, Zhang P, Korsunsky AM, Song X et al.},
  journal={Materials Science and Engineering A},
  volume={528},
  pages={5935-5944},
  year = "2011"
}

BibTeX

@article{effectsofimpose-2011/7,
  title={Effects of imposed displacement and initial coating thickness on fretting behaviour of a thermally sprayed coating},
  author={Kim K & Korsunsky AM},
  journal={WEAR},
  volume={271},
  pages={1080-1085},
  year = "2011"
}

BibTeX

@article{fullytwodimensi-2011/5,
  title={Fully Two-Dimensional Discrete Inverse Eigenstrain Analysis of Residual Stresses in a Railway Rail Head},
  author={Song X & Korsunsky AM},
  journal={JOURNAL OF APPLIED MECHANICS-TRANSACTIONS OF THE ASME},
  volume={78},
  number={ARTN 031019},
  year = "2011"
}

BibTeX

@article{mappingthedislo-2011/5,
  title={Mapping the dislocation sub-structure of deformed polycrystalline Ni by scanning microbeam diffraction topography},
  author={Abbey B, Hofmann F, Belnoue J, Rack A, Tucoulou R et al.},
  journal={SCRIPTA MATERIALIA},
  volume={64},
  pages={884-887},
  year = "2011"
}

BibTeX

@article{fullytwodimensi-2011/3,
  title={Fully two-dimensional discrete inverse eigenstrain analysis of residual stresses in a railway rail head},
  author={Song X & Korsunsky AM},
  journal={Journal of Applied Mechanics, Transactions ASME},
  volume={78},
  year = "2011"
}

BibTeX

@article{effectofmicrost-2011/3,
  title={Effect of microstructures and texture development on tensile properties of Mg-10Gd-3Y alloy},
  author={Liu WC, Dong J, Song X, Belnoue JP, Hofmann F et al.},
  journal={Materials Science and Engineering A},
  volume={528},
  pages={2250-2258},
  year = "2011"
}

BibTeX

@article{inverseeigenstr-2011/2,
  title={Inverse Eigenstrain Analysis of the Effect of Non-uniform Sample Shape on the Residual Stress Due to Shot Peening},
  author={Jun T-S, Venter AM & Korsunsky AM},
  journal={EXPERIMENTAL MECHANICS},
  volume={51},
  pages={165-174},
  year = "2011"
}

BibTeX

@article{asynchrotrontom-2011/2,
  title={A synchrotron tomographic energy-dispersive diffraction imaging study of the aerospace alloy Ti 6246},
  author={Cernik RJ, Hansson CCT, Martin CM, Preuss M, Attallah M et al.},
  journal={Journal of Applied Crystallography},
  volume={44},
  pages={150-157},
  year = "2011"
}

BibTeX

@article{residualstressm-2011/1,
  title={Residual stress measurement in thin films using the semi-destructive ring-core drilling method using Focused Ion Beam},
  author={Song X, Yeap KB, Zhu J, Belnoue J, Sebastiani M et al.},
  journal={Procedia Engineering},
  volume={10},
  pages={2190-2195},
  year = "2011"
}

@article{residualstressm-2011/,
  title={Residual stress measurement in thin films at sub-micron scale using Focused Ion Beam milling and imaging},
  author={Song X, Yeap KB, Zhu J, Belnoue J, Sebastiani M et al.},
  journal={Thin Solid Films},
  year = "2011"
}

@inproceedings{adaptivecalibra-2011/,
  title={ADAPTIVE CALIBRATION OF A NONLOCAL COUPLED DAMAGE PLASTICITY MODEL FOR ALUMINIUM ALLOY AA6082 T0},
  author={Belnoue JP & Korsunsky AM},
  pages={1095-1106},
  year = "2011"
}

@article{analysisofthein-2011/,
  title={Analysis of the internal structure and lattice (mis)orientation in individual grains of deformed CP nickel polycrystals by synchrotron X-ray micro-diffraction and microscopy},
  author={Korsunsky AM, Hofmann F, Abbey B, Song X, Belnoue JP et al.},
  journal={International Journal of Fatigue},
  year = "2011"
}

BibTeX

@article{residualstresse-2010/12,
  title={Residual stress evaluation at the micrometer scale: Analysis of thin coatings by FIB milling and digital image correlation},
  author={Korsunsky AM, Sebastiani M & Bemporad E},
  journal={SURFACE & COATINGS TECHNOLOGY},
  volume={205},
  pages={2393-2403},
  year = "2010"
}

@article{engineeringatla-2010/12,
  title={Engineering at large scale: Experience from diamond light source},
  author={Korsunsky AM},
  journal={WCE 2010 - World Congress on Engineering 2010},
  volume={2},
  pages={984-987},
  year = "2010"
}

@article{wceworldcongres-2010/12,
  title={WCE 2010 - World Congress on Engineering 2010: Preface},
  author={Korsunsky AM, Hunter A, Hukins DWL, Gelman L, Hogger CJ et al.},
  journal={WCE 2010 - World Congress on Engineering 2010},
  volume={1},
  year = "2010"
}

BibTeX

@article{eigenstrainreco-2010/11,
  title={Eigenstrain reconstruction method in linear friction welded aluminium alloy and MMC plates},
  author={Jun T-S & Korsunsky AM},
  journal={INTERNATIONAL JOURNAL FOR NUMERICAL METHODS IN ENGINEERING},
  volume={84},
  pages={989-1008},
  year = "2010"
}

BibTeX

@article{frettingdamageo-2010/11,
  title={Fretting damage of Ni-MoS<sup>2</sup> coatings: Friction coefficient and accumulated dissipated energy evolutions},
  author={Kim K & Korsunsky AM},
  journal={Proceedings of the Institution of Mechanical Engineers, Part J: Journal of Engineering Tribology},
  volume={224},
  pages={1173-1180},
  year = "2010"
}

BibTeX

@article{evaluationofthe-2010/11,
  title={Evaluation of the overload effect on fatigue crack growth with the help of synchrotron XRD strain mapping},
  author={Belnoue JP, Jun T-S, Hofmann F, Abbey B & Korsunsky AM},
  journal={ENGINEERING FRACTURE MECHANICS},
  volume={77},
  pages={3216-3226},
  year = "2010"
}

BibTeX

@article{tiltingduringis-2010/10,
  title={Tilting during island growth of In<inf>2</inf>O<inf>3</inf> on Y-stabilized ZrO<inf>2</inf> (001) revealed by high-resolution x-ray diffraction},
  author={Cowley RA, Bourlange A, Hutchison JL, Zhang KHL, Korsunsky AM et al.},
  journal={Physical Review B - Condensed Matter and Materials Physics},
  volume={82},
  year = "2010"
}

BibTeX

@article{synchrotronxray-2010/10,
  title={Synchrotron X-ray tomographic investigation of internal structure of individual flax fibres},
  author={Abbey B, Eve S, Thuault A, Charlet K & Korsunsky A},
  journal={IFMBE Proceedings},
  volume={31 IFMBE},
  pages={1151-1154},
  year = "2010"
}

BibTeX

@article{dislocationbase-2010/10,
  title={Dislocation-based plasticity model and micro-beam Laue diffraction analysis of polycrystalline Ni foil: A forward prediction},
  author={Song X, Hofmann F & Korsunsky AM},
  journal={Philosophical Magazine},
  volume={90},
  pages={3999-4011},
  year = "2010"
}

BibTeX

@inproceedings{mechanicalandmi-2010/9,
  title={Mechanical and microstructural characterization of 2124Al/25 vol.%SiCp joints obtained by linear friction welding (LFW)},
  author={Rotundo F, Ceschini L, Morri A, Jun T-S & Korsunsky AM},
  pages={1028-1037},
  year = "2010"
}

BibTeX

@article{probingdeformat-2010/9,
  title={Probing deformation substructure by synchrotron X-ray diffraction and dislocation dynamics modelling.},
  author={Korsunsky AM, Hofmann F, Song X, Eve S & Collins SP},
  journal={J Nanosci Nanotechnol},
  volume={10},
  pages={5935-5950},
  year = "2010"
}

BibTeX

@article{influenceofheat-2010/8,
  title={Influence of heat treatment on fatigue behaviour of high-strength Mg-10Gd-3Y alloy},
  author={Dong J, Liu WC, Song X, Zhang P, Ding WJ et al.},
  journal={Materials Science and Engineering A},
  volume={527},
  pages={6053-6063},
  year = "2010"
}

BibTeX

@article{polycrystaldefo-2010/8,
  title={Polycrystal deformation analysis by high energy synchrotron X-ray diffraction on the 112 JEEP beamline at Diamond Light Source},
  author={Korsunsky AM, Song X, Hofmann F, Abbey B, Xie M et al.},
  journal={MATERIALS LETTERS},
  volume={64},
  pages={1724-1727},
  year = "2010"
}

BibTeX

@article{amethodforthein-2010/8,
  title={A method for the in situ measurement of evolving elliptical cross-sections in initially cylindrical Taylor impact specimens},
  author={Wielewski E, Arthington MR, Siviour CR, Carter S, Hofmann F et al.},
  journal={Journal of Strain Analysis for Engineering Design},
  volume={45},
  pages={429-437},
  year = "2010"
}

BibTeX

@article{smoothandnotche-2010/7,
  title={Smooth and notched fatigue performance of aging treated and shot peened ZK60 magnesium alloy},
  author={Liu WC, Dong J, Zhang P, Zheng XW, Ding WJ et al.},
  journal={Journal of Materials Research},
  volume={25},
  pages={1375-1387},
  year = "2010"
}

BibTeX

@inproceedings{theuseofcoupled-2010/7,
  title={The use of coupled nonlocal damage-plasticity to predict crack growth in ductile metal plates},
  author={Belnoue JP, Garnham B, Bache M & Korsunsky AM},
  pages={1721-1729},
  year = "2010"
}

BibTeX

@article{evaluationofres-2010/6,
  title={Evaluation of residual stresses and strains using the Eigenstrain Reconstruction Method},
  author={Jun T-S & Korsunsky AM},
  journal={INTERNATIONAL JOURNAL OF SOLIDS AND STRUCTURES},
  volume={47},
  pages={1678-1686},
  year = "2010"
}

BibTeX

@article{antiplaneintera-2010/6,
  title={Anti-plane interaction of a crack and reinforced elliptic hole in an infinite matrix},
  author={Chao CK, Wikarta A & Korsunsky AM},
  journal={THEORETICAL AND APPLIED FRACTURE MECHANICS},
  volume={53},
  pages={205-210},
  year = "2010"
}

BibTeX

@article{microstructurer-2010/6,
  title={Microstructure, residual strain, and eigenstrain analysis of dissimilar friction stir welds},
  author={Jun T-S, Dragnevski K & Korsunsky AM},
  journal={MATERIALS & DESIGN},
  volume={31},
  pages={S121-S125},
  year = "2010"
}

BibTeX

@article{residualstrains-2010/6,
  title={Residual strains in AA2024/AlSiCp composite linear friction welds},
  author={Jun T-S, Rotundo F, Song X, Ceschini L & Korsunsky AM},
  journal={MATERIALS & DESIGN},
  volume={31},
  pages={S117-S120},
  year = "2010"
}

BibTeX

@article{highenergytrans-2010/6,
  title={High energy transmission micro-beam Laue synchrotron X-ray diffraction},
  author={Hofmann F, Song X, Jun TS, Abbey B, Peel M et al.},
  journal={Materials Letters},
  volume={64},
  pages={1302-1305},
  year = "2010"
}

BibTeX

@article{dislocationmode-2010/4,
  title={Dislocation model of localized plastic deformation initiated with a flat punch},
  author={Ma L, Korsunsky AM & Wiercigroch M},
  journal={INTERNATIONAL JOURNAL OF SOLIDS AND STRUCTURES},
  volume={47},
  pages={1082-1089},
  year = "2010"
}

@article{applicationsofe-2010/4,
  title={Applications of engineering science},
  author={Korsunsky AM},
  journal={AIP Conference Proceedings},
  volume={1220},
  year = "2010"
}

BibTeX

@article{dissipatedenerg-2010/3,
  title={Dissipated energy and fretting damage in CoCrAlY-MoS2 coatings},
  author={Kim K & Korsunsky AM},
  journal={TRIBOLOGY INTERNATIONAL},
  volume={43},
  pages={676-684},
  year = "2010"
}

@article{linearfrictionw-2010/3,
  title={Linear Friction Welding (LFW) of metal matrix composites},
  author={Ceschini L, Morri A, Rotundo F, Korsunsky A & Jun TS},
  journal={Metallurgia Italiana},
  volume={102},
  pages={23-30},
  year = "2010"
}

@article{linearfrictionw-2010/3,
  title={Linear Friction Welding (LFW) of metal matrix composites},
  author={Ceschini L, Morri A, Rotundo F, Korsunsky A & Jun T-S},
  journal={METALLURGIA ITALIANA},
  pages={23-30},
  year = "2010"
}

BibTeX

@article{numericalandexp-2010/2,
  title={Numerical and experimental study of residual stresses in a linear friction welded Al-SiC<inf>p</inf> composite},
  author={Jun TS, Song X, Rotundo F, Ceschini L, Morri A et al.},
  journal={Advanced Materials Research},
  volume={89-91},
  pages={268-274},
  year = "2010"
}

BibTeX

@article{astudyonsimilar-2010/2,
  title={A study on similar and dissimilar linear friction welds of 2024 Al alloy and 2124Al/SiC<inf>P</inf> composite},
  author={Ceschini L, Morri A, Rotundo F, Jun TS & Korsunsky AM},
  journal={Advanced Materials Research},
  volume={89-91},
  pages={461-466},
  year = "2010"
}

BibTeX

@inproceedings{straingradientp-2010/1,
  title={Strain gradient polycrystal plasticity analysis: Fe modeling and synchrotron x-ray diffraction},
  author={Song X, Zhang SY & Korsunsky AM},
  pages={10-17},
  year = "2010"
}

BibTeX

@article{theevolutionofe-2010/1,
  title={The evolution of electrochemical, microstructural, and mechanical properties of aluminium alloy 2024-T4 (D16AT) during fatigue cycling},
  author={Salimon SR, Salimon AI & Korsunsky AM},
  journal={Proceedings of the Institution of Mechanical Engineers, Part G: Journal of Aerospace Engineering},
  volume={224},
  pages={339-353},
  year = "2010"
}

BibTeX

@misc{determinationof-2010/1,
  title={Determination of hardness and modulus of thin films},
  author={Korsunsky AM & Bull SJ},
  year = "2010"
}

BibTeX

@inproceedings{onthemeasuremen-2010/1,
  title={ON THE MEASUREMENT AND INTERPRETATION OF RESIDUAL STRESS AT THE MICRO-SCALE},
  author={Korsunsky AM, Bemporad E, Sebastiani M, Hofmann F & Dave S},
  pages={1-9},
  year = "2010"
}

BibTeX

@inproceedings{intragranularla-2010/1,
  title={Intragranular lattice misorientation mapping by synchrotron x-ray micro-beams: Laue vs energy-resolved laue vs monochromatic reciprocal space analysis},
  author={Hofmann F, Abbey B, Song X, Dolbnya I & Korsunsky AM},
  pages={279-287},
  year = "2010"
}

BibTeX

@article{dissipatedenerg-2010/,
  title={Dissipated energy and friction coefficient evolution during fretting wear of solid lubricant coatings},
  author={Korsunsky AM & Kim K},
  journal={TRIBOLOGY INTERNATIONAL},
  volume={43},
  pages={861-867},
  year = "2010"
}

BibTeX

@article{theevolutionofe-2010/,
  title={The evolution of electrochemical, microstructural, and mechanical properties of aluminium alloy 2024-T4 (D16AT) during fatigue cycling},
  author={Salimon SR, Salimon AI & Korsunsky AM},
  journal={PROCEEDINGS OF THE INSTITUTION OF MECHANICAL ENGINEERS PART G-JOURNAL OF AEROSPACE ENGINEERING},
  volume={224},
  pages={339-353},
  year = "2010"
}

BibTeX

@inproceedings{nonsingulardisl-2010/,
  title={Non-Singular Dislocation Elastic Fields and Linear Elastic Fracture Mechanics},
  author={Korsunsky AM},
  pages={114-123},
  year = "2010"
}

BibTeX

@article{frettingdamageo-2010/,
  title={Fretting damage of Ni-MoS2 coatings: friction coefficient and accumulated dissipated energy evolutions},
  author={Kim K & Korsunsky AM},
  journal={PROCEEDINGS OF THE INSTITUTION OF MECHANICAL ENGINEERS PART J-JOURNAL OF ENGINEERING TRIBOLOGY},
  volume={224},
  pages={1173-1180},
  year = "2010"
}

@inproceedings{anewmethodology-2010/,
  title={A New Methodology For In-Situ Residual Stress Measurement In MEMS Structures},
  author={Sebastiani M, Bemporad E, Melone G, Rizzi L & Korsunsky AM},
  pages={120-+},
  year = "2010"
}

BibTeX

@inproceedings{investigationof-2010/,
  title={Investigation of the structure of human dental tissue at multiple length scales using high energy synchrotron X-ray SAXS/WAXS},
  author={Sui T, Landini G & Korsunsky AM},
  pages={113-124},
  year = "2010"
}

@inproceedings{globalizationne-2010/,
  title={Globalization, Networking, and Engineering Technologies},
  author={Korsunsky AM},
  pages={1500-1504},
  year = "2010"
}

BibTeX

@inproceedings{aneutrondiffrac-2010/,
  title={A neutron-diffraction study of the low-cycle fatigue behaviour of an austenitic stainless steel 316.},
  author={Dubreuil A, Zhang SY, Eve S & Korsunsky A},
  pages={S125-S125},
  year = "2010"
}

BibTeX

@article{synchrotronxray-2010/,
  title={Synchrotron X-ray analysis of microstructure and microdeformation in a recast AA6063 aluminium alloy},
  author={Korsunsky AM, Hofmann F, Abbey B & Gaucherin G},
  journal={JOURNAL OF STRAIN ANALYSIS FOR ENGINEERING DESIGN},
  volume={45},
  pages={351-363},
  year = "2010"
}

BibTeX

@article{straintomograph-2010/,
  title={Strain tomography of polycrystalline zirconia dental prostheses by synchrotron X-ray diffraction},
  author={korsunsky AM, Baimpas N, Xu S, Belnoue J, Hofmann F et al.},
  journal={Acta Materialia},
  volume={59},
  pages={2501-2513},
  publisher={Elsevier},
  year = "2010"
}

BibTeX

@inproceedings{mappingofdomain-2010/,
  title={Mapping of domain structure in Barium Titanate single crystals by synchrotron X-ray topography},
  author={Potnis PR, Huber JE, Sutter JP, Hofmann F, Abbey B et al.},
  year = "2010"
}

@article{thediversityoft-2009/12,
  title={The diversity of themes in engineering science},
  author={Korsunsky AM},
  journal={AIP Conference Proceedings},
  volume={1138},
  year = "2009"
}

@article{analysisofcrack-2009/12,
  title={Analysis of crack trajectories in Ni-base superalloy plates using coupled non-local damage-plasticity modeling},
  author={Belnoue JP & Korsunsky AM},
  journal={12th International Conference on Fracture 2009, ICF-12},
  volume={2},
  pages={1521-1530},
  year = "2009"
}

@article{eigenstrainanal-2009/12,
  title={Eigenstrain analysis of redisual stresses due to welding and post-weld heat treatment of aerospace materials},
  author={Korsunsky AM & Jun TS},
  journal={The Minerals, Metals and Materials Society - 3rd International Conference on Processing Materials for Properties 2008, PMP III},
  volume={2},
  pages={738-743},
  year = "2009"
}

@article{symboliccomputa-2009/12,
  title={Symbolic computations for analytical solutions: An indentation computation},
  author={Constantinescu A, Korsunsky AM & Pison O},
  journal={12th International Conference on Fracture 2009, ICF-12},
  volume={5},
  pages={4061-4070},
  year = "2009"
}

BibTeX

@inproceedings{cracktipdeforma-2009/11,
  title={Crack tip deformation fields and fatigue crack growth rates in Ti-6Al-4V},
  author={Korsunsky AM, Song X, Belnoue J, Jun T, Hofmann F et al.},
  pages={1771-1779},
  year = "2009"
}

BibTeX

@article{triaxialresidua-2009/10,
  title={Triaxial residual strains in a railway rail measured by neutron diffraction},
  author={Jun TS, Hofmann F, Belnoue J, Song X, Hofmann M et al.},
  journal={Journal of Strain Analysis for Engineering Design},
  volume={44},
  pages={563-568},
  year = "2009"
}

BibTeX

@article{focusedionbeamr-2009/9,
  title={Focused ion beam ring drilling for residual stress evaluation},
  author={Korsunsky AM, Sebastiani M & Bemporad E},
  journal={MATERIALS LETTERS},
  volume={63},
  pages={1961-1963},
  year = "2009"
}

BibTeX

@inproceedings{theinfluenceofi-2009/7,
  title={The influence of indenter bluntness on the apparent contact stiffness of thin coatings},
  author={Korsunsky AM & Constantinescu A},
  pages={4835-4844},
  year = "2009"
}

BibTeX

@inproceedings{analysisofthesp-2009/5,
  title={Analysis of the spray field development on a vertical surface during water spray-quenching using a flat spray nozzle},
  author={Vorster WJJ, Schwindt SA, Schupp J & Korsunsky AM},
  pages={1406-1416},
  year = "2009"
}

BibTeX

@article{synchrotronbase-2009/5,
  title={Synchrotron based reciprocal space mapping and dislocation substructure analysis},
  author={Hofmann F, Song X, Eve S, Collins SP & Korsunsky AM},
  journal={Materials Letters},
  volume={63},
  pages={1077-1081},
  year = "2009"
}

BibTeX

@article{inertiafriction-2009/2,
  title={Inertia friction welds between nickel superalloy components: analysis of residual stress by eigenstrain distributions},
  author={Korsunsky AM, Regino GM, Nowell D, Karadge M, Grant B et al.},
  journal={JOURNAL OF STRAIN ANALYSIS FOR ENGINEERING DESIGN},
  volume={44},
  pages={159-170},
  year = "2009"
}

BibTeX

@article{developmentandc-2009/2,
  title={Development and characterization of low-friction coatings for protection against fretting wear in aerospace components},
  author={Korsunsky AM, Torosyan AR & Kim K},
  journal={Metal Finishing},
  volume={107},
  pages={45-52},
  year = "2009"
}

BibTeX

@article{residualstraina-2009/1,
  title={RESIDUAL STRAIN ANALYSIS},
  author={Korsunsky AM & Hills DA},
  journal={JOURNAL OF STRAIN ANALYSIS FOR ENGINEERING DESIGN},
  volume={44},
  pages={I-IV},
  year = "2009"
}

BibTeX

@article{eigenstrainanal-2009/1,
  title={Eigenstrain analysis of residual strains and stresses},
  author={Korsunsky AM},
  journal={JOURNAL OF STRAIN ANALYSIS FOR ENGINEERING DESIGN},
  volume={44},
  pages={29-43},
  year = "2009"
}

BibTeX

@article{residualstraina-2009/1,
  title={Residual strain analysis in polycrystalline aggregates using diffraction measurement and finite element modelling},
  author={Dini D, Song X, Zhang SY & Korsunsky AM},
  journal={Journal of Strain Analysis for Engineering Design},
  volume={44},
  pages={55-70},
  year = "2009"
}

BibTeX

@article{analysisofresid-2009/1,
  title={Analysis of residual strain and stress states due to heat treatment and thermal processing},
  author={Vorster WJJ & Korsunsky AM},
  journal={JOURNAL OF STRAIN ANALYSIS FOR ENGINEERING DESIGN},
  volume={44},
  pages={71-91},
  year = "2009"
}

BibTeX

@inproceedings{analysisofresid-2009/1,
  title={Analysis of residual stresses around welds in a combustion casing},
  author={Song X, Kyriakoglou I & Korsunsky AM},
  pages={189-192},
  year = "2009"
}

@article{journalofstrain-2009/1,
  title={Journal of Strain Analysis for Engineering Design: Guest Editorial},
  author={Korsunsky AM & Hills DA},
  journal={Journal of Strain Analysis for Engineering Design},
  volume={44},
  year = "2009"
}

BibTeX

@article{guesteditorial-2009/1,
  title={Guest Editorial},
  author={Korsunsky AM & Hills DA},
  journal={The Journal of Strain Analysis for Engineering Design},
  volume={44},
  pages={i-iv},
  year = "2009"
}

BibTeX

@inproceedings{probingintragra-2009/1,
  title={Probing intra-granular deformation by micro-beam Laue diffraction},
  author={Hofmann F, Song X, Dolbnya I, Abbey B & Korsunsky AM},
  pages={193-196},
  year = "2009"
}

BibTeX

@inproceedings{digitalimagecor-2009/1,
  title={Digital image correlation and finite element analysis of inter- and intra-granular deformation},
  author={Dave S, Song X, Hofmann F, Dragnevski K & Korsunsky AM},
  pages={197-200},
  year = "2009"
}

BibTeX

@inproceedings{influenceofquen-2009/,
  title={Influence of Quenchant Hydrodynamics and Boiling Phase Incipient Temperature Shifts on Residual Stress Formation},
  author={Vorster WJJ, Van Der Watt MW, Venter AM, Oliver EC, Prakash DGL et al.},
  pages={564-573},
  year = "2009"
}

@inproceedings{materialsstruct-2009/,
  title={Materials Structure and Strain Analysis Using Time-of-flight Neutron Diffraction},
  author={Zhang SY, Godfrey E, Abbey B, Xu P, Tomota Y et al.},
  pages={1412-+},
  year = "2009"
}

BibTeX

@inproceedings{crackgrowthmicr-2009/,
  title={Crack growth micro-mechanisms in the IN718 alloy under the combined influence of fatigue, creep and oxidation},
  author={Prakash DGL, Walsh MJ, Maclachlan D & Korsunsky AM},
  pages={1966-1977},
  year = "2009"
}

BibTeX

@article{hightechcomposi-2009/,
  title={High-tech composites to ancient metals},
  author={Zhang SY, Godfrey E, Kockelmann W, Paradowska A, Bull MJ et al.},
  journal={MATERIALS TODAY},
  volume={12},
  pages={78-84},
  year = "2009"
}

@inproceedings{onthesizeeffect-2009/,
  title={On the Size Effects and Scale Transitions in the Strength and Failure of Materials and Structures},
  author={Korsunsky AM},
  pages={23-34},
  year = "2009"
}

@inproceedings{analogyandorigi-2009/,
  title={Analogy and Originality in the Context of Scientific Enquiry},
  author={Korsunsky AM & Ao SI},
  pages={1396-1401},
  year = "2009"
}

BibTeX

@inproceedings{mesomechanicsfo-2009/,
  title={Mesomechanics 2009 Foreword: Dissipation and damage across multiple scales in physical and mechanical systems},
  author={Sih GC, Korsunsky AM & Dini D},
  pages={1-3},
  year = "2009"
}

BibTeX

@inproceedings{investigationof-2009/,
  title={Investigation of changes in crystalline and amorphous structure during deformation of nano-reinforced semi-crystalline polymers by space-resolved synchrotron SAXS and WAXS},
  author={Schneider K, Schoene A, Jun T-S & Korsunsky AM},
  pages={159-162},
  year = "2009"
}

BibTeX

@inproceedings{consistenttange-2009/,
  title={Consistent tangent stiffness for local-nonlocal damage modelling of metals},
  author={Belnoue JP, Nguyen GD & Korsunsky AM},
  pages={177-180},
  year = "2009"
}

BibTeX

@inproceedings{feasibilitystud-2009/,
  title={Feasibility study of neutron strain tomography},
  author={Abbey B, Zhang SY, Vorster WJJ & Korsunsky AM},
  pages={185-188},
  year = "2009"
}

BibTeX

@inproceedings{inverseeigenstr-2009/,
  title={Inverse eigenstrain analysis of residual stresses in friction stir welds},
  author={Luckhoo HT, Jun T-S & Korsunsky AM},
  pages={213-216},
  year = "2009"
}

BibTeX

@inproceedings{synchrotronxrds-2009/,
  title={Synchrotron XRD study of residual stress in a shot peened Al/SiCp composite},
  author={Rotundo F & Korsunsky AM},
  pages={221-224},
  year = "2009"
}

BibTeX

@inproceedings{synchrotroninve-2009/,
  title={Synchrotron investigations of non-uniformly shaped shot-peened samples},
  author={Venter AM, la Grange CP, Hofmann F, Jun T-S, Belnoue J et al.},
  pages={315-320},
  year = "2009"
}

BibTeX

@inproceedings{eigenstrainanal-2009/,
  title={Eigenstrain analysis of non-uniformly shaped shot-peened samples},
  author={Jun T-S, Venter AM, la Grange CP, Hofmann F, Belnoue J et al.},
  pages={151-154},
  year = "2009"
}

BibTeX

@inproceedings{crystalplastici-2009/,
  title={Crystal plasticity and hardening: a dislocation dynamics study},
  author={Gaucherin G, Hofmann F, Belnoue JP & Korsunsky AM},
  pages={241-244},
  year = "2009"
}

BibTeX

@inproceedings{finiteelementmo-2008/11,
  title={Finite element modelling and diffraction measurement of elastic strains during tensile deformation of HCP polycrystals},
  author={Song X, Zhang SY, Dini D & Korsunsky AM},
  pages={131-137},
  year = "2008"
}

BibTeX

@article{surfacedislocat-2008/11,
  title={Surface dislocation nucleation from frictional sliding contacts},
  author={Ma L & Korsunsky AM},
  journal={INTERNATIONAL JOURNAL OF SOLIDS AND STRUCTURES},
  volume={45},
  pages={5936-5945},
  year = "2008"
}

BibTeX

@inproceedings{highenergywhite-2008/10,
  title={High energy white beam x-ray diffraction studies of residual strains in engineering components},
  author={Zhang SY, Vorster W, Jun TS, Song X, Golshan M et al.},
  pages={41-50},
  year = "2008"
}

BibTeX

@article{developmentofan-2008/10,
  title={Development of an approach to constitutive modelling of concrete: Isotropic damage coupled with plasticity},
  author={Nguyen GD & Korsunsky AM},
  journal={INTERNATIONAL JOURNAL OF SOLIDS AND STRUCTURES},
  volume={45},
  pages={5483-5501},
  year = "2008"
}

@article{currentthemesin-2008/10,
  title={Current themes in engineering science - 2007},
  author={Korsunsky AM},
  journal={AIP Conference Proceedings},
  volume={1045},
  year = "2008"
}

BibTeX

@article{abeambendingeig-2008/9,
  title={A beam-bending eigenstrain analysis of residual elastic strains in multi-scan laser-formed steel samples},
  author={Korsunsky AM, Vorster WJJ, Zhang SY, Topic M & Venter AM},
  journal={PROCEEDINGS OF THE INSTITUTION OF MECHANICAL ENGINEERS PART C-JOURNAL OF MECHANICAL ENGINEERING SCIENCE},
  volume={222},
  pages={1635-1645},
  year = "2008"
}

BibTeX

@article{exponentialevol-2008/8,
  title={Exponential evolution law of fretting wear damage in low-friction coatings for aerospace components},
  author={Kim K & Korsunsky AM},
  journal={SURFACE & COATINGS TECHNOLOGY},
  volume={202},
  pages={5838-5846},
  year = "2008"
}

BibTeX

@article{directevidenceo-2008/7,
  title={Direct evidence of initial pitting corrosion},
  author={Wang MF, Li XG, Du N, Huang YZ & Korsunsky A},
  journal={Electrochemistry Communications},
  volume={10},
  pages={1000-1004},
  year = "2008"
}

BibTeX

@inproceedings{developmentandc-2008/6,
  title={Development and characterization of low friction coatings for protection against fretting wear in aerospace components},
  author={Korsunsky AM, Torosyan AR & Kim K},
  pages={5690-5699},
  year = "2008"
}

BibTeX

@article{highenergysynch-2008/5,
  title={High-energy synchrotron X-ray analysis of residual plastic strains induced in shot-peened steel plates},
  author={Zhang SY, Venter A, Vorster WJJ & Korsunsky AM},
  journal={JOURNAL OF STRAIN ANALYSIS FOR ENGINEERING DESIGN},
  volume={43},
  pages={229-241},
  year = "2008"
}

BibTeX

@inproceedings{neutrondiffract-2008/3,
  title={Neutron diffraction investigation of an in-plane biaxial fatigued stainless steel sample of cruciform geometry},
  author={Taran YV, Balagurov AM, Sheverev SG, Schreiber J, Korsunsky AM et al.},
  year = "2008"
}

BibTeX

@inproceedings{intergranularre-2008/1,
  title={Inter-granular residual stresses in polycrystalline aggregates: Finite element modelling and diffraction post-processing},
  author={Song X, Zhang SY, Dini D & Korsunsky AM},
  pages={271-276},
  year = "2008"
}

BibTeX

@article{predictionoffat-2008/1,
  title={Prediction of fatigue crack growth rates in Ti-6Al-4V alloy},
  author={Korsunsky AM, Dini D & Walsh MJ},
  journal={Solid Mechanics and its Applications},
  volume={152},
  pages={47-64},
  year = "2008"
}

BibTeX

@inproceedings{astudyofresidua-2008/,
  title={A study of residual elastic strain distribution in an AZ91 Mg alloy bar loaded in four point bending},
  author={Prakash DGL, Vorster WJJ, Zhang SY & Korsunsky AM},
  pages={113-+},
  year = "2008"
}

BibTeX

@inproceedings{neutrondiffract-2008/,
  title={Neutron diffraction analysis of stresses in an in-plane biaxially-fatigued stainless steel sample of cruciform geometry},
  author={Taran YV, Balagurov AM, Schreiber J & Korsunsky AM},
  pages={131-+},
  year = "2008"
}

BibTeX

@inproceedings{neutrondiffract-2008/,
  title={Neutron diffraction measurement and finite element modelling of residual strains due to bath and spray quenching of AISI 316L stainless steel cylinders},
  author={Vorster WJJ, van der Watt MW, Venter AM, Oliver EC & Korsunsky AM},
  pages={137-+},
  year = "2008"
}

BibTeX

@inproceedings{acriticaldiscus-2008/,
  title={A critical discussion of the sin(2)psi stress measurement technique},
  author={Korsunsky AM},
  pages={219-224},
  year = "2008"
}

BibTeX

@inproceedings{experimentalmod-2008/,
  title={Experimental/modelling study of residual stress in Al/SiCp bent bars by synchrotron XRD and slitting eigenstrain methods},
  author={Song X, Chardonnet S, Savini G, Zhang SY, Vorster WJJ et al.},
  pages={277-282},
  year = "2008"
}

BibTeX

@inproceedings{analysisofresid-2008/,
  title={Analysis of residual stresses around 'dimpled' cold-expanded holes in aluminium alloy plates},
  author={Zhang SY, Schlipf J & Korsunsky AM},
  pages={295-300},
  year = "2008"
}

BibTeX

@inproceedings{synchrotronener-2008/,
  title={Synchrotron energy-dispersive X-ray diffraction analysis of residual strains around friction welds between dissimilar aluminium and nickel alloys},
  author={Jun T-S, Zhang SY, Golshan M, Peel M, Richards D et al.},
  pages={407-+},
  year = "2008"
}

BibTeX

@inproceedings{fatiguecrackgro-2008/,
  title={Fatigue crack growth rate analysis in a titanium alloy},
  author={Korsunsky AM, Dini D & Walsh MJ},
  pages={5-+},
  year = "2008"
}

BibTeX

@inproceedings{astudyofresidua-2008/,
  title={A study of residual stresses in Al/SiCp linear friction weldment by energy-dispersive neutron diffraction},
  author={Jun T-S, Rotundo F, Ceschini L & Korsunsky AM},
  pages={517-520},
  year = "2008"
}

@inproceedings{areviewofsizean-2008/,
  title={A Review of Size and Scale Effects in Strength and Failure of Materials and Structures},
  author={Korsunsky AM},
  pages={1829-1834},
  year = "2008"
}

BibTeX

@inproceedings{neutrontransmis-2008/,
  title={Neutron transmission strain tomography},
  author={Zhang SY, Korsunsky AM & Oliver EC},
  pages={C188-C188},
  year = "2008"
}

@article{microscopicener-2007/12,
  title={Microscopic energy dissipation and fatigue crack initiation in polycrystalline metallic alloys},
  author={Song X, Zhang SY, Dini D & Korsunsky AM},
  journal={Computational Plasticity - Fundamentals and Applications, COMPLAS IX},
  pages={709-712},
  year = "2007"
}

@article{formulationandc-2007/12,
  title={Formulation and calibration of a crystal plasticity finite element model for HCP polycrystals},
  author={Zhang SY, Song X, Dini D & Korsunsky AM},
  journal={Computational Plasticity - Fundamentals and Applications, COMPLAS IX},
  pages={639-642},
  year = "2007"
}

@article{parametercalibr-2007/12,
  title={Parameter calibration in non-local damage-plasticity modelling of ductile materials},
  author={Belnoue J, Armitage P, Nguyen G & Korsunsky A},
  journal={Computational Plasticity - Fundamentals and Applications, COMPLAS IX},
  pages={533-536},
  year = "2007"
}

BibTeX

@article{multiscanlaserf-2007/10,
  title={Multi-scan laser forming: synchrotron strain scanning and microstructure evolution},
  author={Topic MN, McGrath P, Vorster WJJ, Zhang SY, Bucher R et al.},
  journal={JOURNAL OF STRAIN ANALYSIS FOR ENGINEERING DESIGN},
  volume={42},
  pages={497-505},
  year = "2007"
}

BibTeX

@article{theeffectofpath-2007/10,
  title={The effect of path cut on Somigliana ring dislocation elastic fields},
  author={Paynter RJH, Hills DA & Korsunsky AM},
  journal={International Journal of Solids and Structures},
  volume={44},
  pages={6653-6677},
  year = "2007"
}

@book{elasticitywithm-2007/10,
  title={Elasticity With Mathematica},
  author={Constantinescu A & Korsunsky A},
  publisher={Cambridge Univ Pr},
  year = "2007"
}

BibTeX

@inproceedings{onthemicromecha-2007/9,
  title={On the micromechanics of micro-cantilever sensors: Property analysis and eigenstrain modeling},
  author={Korsunsky AM, Cherian S, Raiteri R & Berger R},
  pages={70-77},
  year = "2007"
}

BibTeX

@article{onthemicromecha-2007/9,
  title={On the micromechanics of micro-cantilever sensors: Property analysis and eigenstrain modeling},
  author={Korsunsky AM, Cherian S, Raiteri R & Berger R},
  journal={Sensors and Actuators, A: Physical},
  volume={139},
  pages={70-77},
  year = "2007"
}

BibTeX

@article{residualelastic-2007/7,
  title={Residual elastic strains in autofrettaged tubes: Variational analysis by the eigenstrain finite element method},
  author={Korsunsky AM & Regino GM},
  journal={JOURNAL OF APPLIED MECHANICS-TRANSACTIONS OF THE ASME},
  volume={74},
  pages={717-722},
  year = "2007"
}

BibTeX

@article{variationaleige-2007/6,
  title={Variational eigenstrain analysis of residual stresses in a welded plate},
  author={Korsunsky AM, Regino GM & Nowell D},
  journal={INTERNATIONAL JOURNAL OF SOLIDS AND STRUCTURES},
  volume={44},
  pages={4574-4591},
  year = "2007"
}

BibTeX

@article{evaluationandan-2007/3,
  title={Evaluation and analysis of residual stresses due to foreign object damage},
  author={Duó P, Liu J, Dini D, Golshan M & Korsunsky AM},
  journal={Mechanics of Materials},
  volume={39},
  pages={199-211},
  year = "2007"
}

BibTeX

@article{aonedimensional-2007/3,
  title={A one-dimensional nonlocal damage-plasticity model for ductile materials},
  author={Belnoue JP, Nguyen GD & Korsunsky AM},
  journal={INTERNATIONAL JOURNAL OF FRACTURE},
  volume={144},
  pages={53-60},
  year = "2007"
}

BibTeX

@article{residualstresse-2007/2,
  title={Residual stresses in rolled and machined nickel alloy plates: Synchrotron X-ray diffraction measurement and three-dimensional eigenstrain analysis},
  author={Korsunsky AM, Regino GM, Latham DP, Li HY & Walsh MJ},
  journal={Journal of Strain Analysis for Engineering Design},
  volume={42},
  pages={1-12},
  year = "2007"
}

BibTeX

@article{residualstresse-2007/1,
  title={Residual stresses in rolled and machined nickel alloy plates: synchrotron X-ray three-dimensional diffraction measurement and eigenstrain analysis},
  author={Korsunsky AM, Regino GM, Latham DP, Li HY & Walsh MJ},
  journal={JOURNAL OF STRAIN ANALYSIS FOR ENGINEERING DESIGN},
  volume={42},
  pages={1-12},
  year = "2007"
}

BibTeX

@article{comparisonofxra-2007/1,
  title={Comparison of X-ray diffraction measurement of residual elastic strains: monochromatic beam and image plate versus white beam energy-dispersive analysis},
  author={Vorster WJJ, Zhang SY, Golshan M, Laundy D, Dini D et al.},
  journal={JOURNAL OF STRAIN ANALYSIS FOR ENGINEERING DESIGN},
  volume={42},
  pages={23-37},
  year = "2007"
}

BibTeX

@article{residualelastic-2007/1,
  title={Residual elastic strains in autofrettaged tubes: Elastic-ideally plastic model analysis},
  author={Korsunsky AM},
  journal={JOURNAL OF ENGINEERING MATERIALS AND TECHNOLOGY-TRANSACTIONS OF THE ASME},
  volume={129},
  pages={77-81},
  year = "2007"
}

BibTeX

@inproceedings{modelingcrackin-2007/1,
  title={Modeling crack initiation and propagation in nickel base superalloys},
  author={Korsunsky AM, Song X, Belnoue J, Prakash LDG, Dini D et al.},
  pages={53-56},
  year = "2007"
}

@inproceedings{highenergywhite-2007/,
  title={High energy white beam x-ray diffraction studies of residual strains in engineering components},
  author={Zhang SY, Vorster WJJ, Jun T-S, Song X, Golshan M et al.},
  pages={1187-+},
  year = "2007"
}

BibTeX

@inproceedings{comparativeasse-2007/,
  title={Comparative assessment of dissipated energy and other fatigue criteria},
  author={Korsunsky AM, Dini D, Dunne FPE & Walsh MJ},
  pages={1990-1995},
  year = "2007"
}

@inproceedings{anonlocalcouple-2007/,
  title={A nonlocal coupled damage-plasticity model for concrete},
  author={Nguyen GD & Korsunsky AM},
  pages={351-+},
  year = "2007"
}

BibTeX

@book{elasticitywithm-2007/,
  title={Elasticity with Mathematica: An introduction to Continuum Mechanics and Linear Elasticity},
  author={Constantinescu A & Korsunsky A},
  year = "2007"
}

BibTeX

@misc{kinematicsdispl-2007/,
  title={Kinematics: displacements and strains},
  author={Constantinescu A, Korsunsky A, Constantinescu A & Korsunsky A},
  year = "2007"
}

BibTeX

@misc{linearelasticit-2007/,
  title={Linear elasticity},
  author={Constantinescu A, Korsunsky A, Constantinescu A & Korsunsky A},
  year = "2007"
}

BibTeX

@misc{generalprincipl-2007/,
  title={General principles in problems of elasticity},
  author={Constantinescu A, Korsunsky A, Constantinescu A & Korsunsky A},
  year = "2007"
}

BibTeX

@misc{dynamicsandstat-2007/,
  title={Dynamics and statics: stresses and equilibrium},
  author={Constantinescu A, Korsunsky A, Constantinescu A & Korsunsky A},
  year = "2007"
}

BibTeX

@misc{stressfunctions-2007/,
  title={Stress functions},
  author={Constantinescu A, Korsunsky A, Constantinescu A & Korsunsky A},
  year = "2007"
}

BibTeX

@misc{displacementpot-2007/,
  title={Displacement potentials},
  author={Constantinescu A, Korsunsky A, Constantinescu A & Korsunsky A},
  year = "2007"
}

BibTeX

@misc{energyprinciple-2007/,
  title={Energy principles and variational formulations},
  author={Constantinescu A, Korsunsky A, Constantinescu A & Korsunsky A},
  year = "2007"
}

BibTeX

@misc{differentialope-2007/,
  title={Differential operators},
  author={Constantinescu A, Korsunsky A, Constantinescu A & Korsunsky A},
  year = "2007"
}

BibTeX

@misc{plottingparamet-2007/,
  title={Plotting parametric meshes},
  author={Constantinescu A, Korsunsky A, Constantinescu A & Korsunsky A},
  year = "2007"
}

BibTeX

@misc{mathematicatric-2007/,
  title={MATHEMATICA tricks},
  author={Constantinescu A, Korsunsky A, Constantinescu A & Korsunsky A},
  year = "2007"
}

BibTeX

@article{contactofcoated-2006/10,
  title={Contact of coated systems under sliding conditions},
  author={Ma L, Korsunsky AM & Sun K},
  journal={JOURNAL OF TRIBOLOGY-TRANSACTIONS OF THE ASME},
  volume={128},
  pages={886-890},
  year = "2006"
}

BibTeX

@inproceedings{vectorjintegral-2006/9,
  title={Vector J-integral analysis of crack interaction with pre-existing singularities},
  author={Ma L, Lu TJ & Korsunsky AM},
  pages={876-883},
  year = "2006"
}

BibTeX

@article{measurementofre-2006/8,
  title={Measurement of residual elastic strains in a titanium alloy using high energy synchrotron X-ray diffraction},
  author={Korsunsky AM, Liu J, Golshan M, Dini D, Zhang SY et al.},
  journal={EXPERIMENTAL MECHANICS},
  volume={46},
  pages={519-529},
  year = "2006"
}

BibTeX

@article{eigenstrainanal-2006/7,
  title={Eigenstrain analysis of synchrotron X-ray diffraction measurement of residual strains in machined nickel alloy plates},
  author={Korsunsky AM, Regino GM, Latham D, Liu J, Nowell D et al.},
  journal={Journal of Strain Analysis for Engineering Design},
  volume={41},
  pages={381-395},
  year = "2006"
}

BibTeX

@article{vectorjintegral-2006/6,
  title={Vector J-integral analysis of crack initiation at the edge of complete sliding contact},
  author={Mai L & Korsunsky AM},
  journal={PROCEEDINGS OF THE ROYAL SOCIETY A-MATHEMATICAL PHYSICAL AND ENGINEERING SCIENCES},
  volume={462},
  pages={1805-1820},
  year = "2006"
}

BibTeX

@article{damageplasticit-2006/5,
  title={Damage-plasticity modelling of concrete: Calibration of parameters using separation of fracture energy},
  author={Nguyen GD & Korsunsky AM},
  journal={INTERNATIONAL JOURNAL OF FRACTURE},
  volume={139},
  pages={325-332},
  year = "2006"
}

BibTeX

@article{theapplicationo-2006/5,
  title={The application of plasticity principles to friction},
  author={Churchman CM, Korsunsky AM & Hills DA},
  journal={JOURNAL OF STRAIN ANALYSIS FOR ENGINEERING DESIGN},
  volume={41},
  pages={323-328},
  year = "2006"
}

BibTeX

@inproceedings{workofindentati-2006/5,
  title={Work of indentation approach to the analysis of hardness and modulus of thin coatings},
  author={Korsunsky AM & Constantinescui A},
  pages={28-35},
  year = "2006"
}

BibTeX

@inproceedings{theanalysisofde-2006/5,
  title={The analysis of deformation size effects using multiple gauge length extensometry and the essential work of rupture concept},
  author={Korsunsky AM, Nguyen GD & Kim K},
  pages={192-198},
  year = "2006"
}

BibTeX

@article{theprincipleofs-2006/5,
  title={The principle of strain reconstruction tomography: Determination of quench strain distribution from diffraction measurements},
  author={Korsunsky AM, Vorster WJJ, Zhang SY, Dini D, Latham D et al.},
  journal={Acta Materialia},
  volume={54},
  pages={2101-2108},
  year = "2006"
}

BibTeX

@article{residualelastic-2006/4,
  title={Residual elastic strain due to laser shock peening: modelling by eigenstrain distribution},
  author={Korsunsky AM},
  journal={JOURNAL OF STRAIN ANALYSIS FOR ENGINEERING DESIGN},
  volume={41},
  pages={195-204},
  year = "2006"
}

BibTeX

@article{residualelastic-2006/2,
  title={Residual elastic strain due to laser shock peening: synchrotron diffraction measurement},
  author={Korsunsky AM, Liu J, Laundy D, Golshan M & Kim K},
  journal={JOURNAL OF STRAIN ANALYSIS FOR ENGINEERING DESIGN},
  volume={41},
  pages={113-120},
  year = "2006"
}

BibTeX

@article{variationaleige-2006/2,
  title={VARIATIONAL EIGENSTRAIN ANALYSIS OF SYNCHROTRON DIFFRACTION MEASUREMENTS OF RESIDUAL ELASTIC STRAIN IN A BENT TITANIUM ALLOY BAR},
  author={Korsunsky AM},
  journal={JOURNAL OF MECHANICS OF MATERIALS AND STRUCTURES},
  volume={1},
  pages={259-277},
  year = "2006"
}