Publications

BibTeX

@article{anaerodynamicin-2024/10,
  title={AN AERODYNAMIC INVESTIGATION OF A HIGH-PRESSURE TURBINE USING ROTOR CASING STATIC PRESSURE MEASUREMENTS AT ENGINE REPRESENTATIVE CONDITIONS WITH DIFFERENT TIP DESIGNS, TIP GAPS AND INLET TEMPERATURE PROFILES},
  author={Singh D, Beard PF, Cardwell D, Staelens V, Bahulekar P et al.},
  journal={Journal of Turbomachinery},
  pages={1-42},
  publisher={ASME International},
  year = "2024"
}

BibTeX

@inproceedings{anaerodynamicin-2024/6,
  title={An Aerodynamic Investigation of a High-Pressure Turbine Using Rotor Casing Static Pressure Measurements at Engine Representative Conditions With Different Tip Designs, Tip Gaps and Inlet Temperature Profiles},
  author={Singh D, Beard PF, Cardwell D, Staelens V, Bahulekar P et al.},
  booktitle={Volume 12B: Turbomachinery ??? Axial Flow Turbine Aerodynamics; Deposition, Erosion, Fouling, and Icing},
  year = "2024"
}

BibTeX

@inproceedings{matchingturbule-2024/6,
  title={Matching Turbulence to a Target Profile in a Flexible Combustor Simulator Design},
  author={Colyer G, Li H, Adoua SR, Beard P & di Mare L},
  booktitle={Volume 3A: Combustion, Fuels, and Emissions},
  year = "2024"
}

BibTeX

@article{understandingth-2024/2,
  title={Understanding Thermal Unsteadiness in Engine Representative Flows and Improved Methodologies for Derived Heat Transfer Calculations Using Thin-Film Gauges},
  author={Singh D, Beard PF, Cardwell D & Chana KS},
  journal={Journal of Turbomachinery},
  volume={146},
  publisher={ASME International},
  year = "2024"
}

BibTeX

@article{infraredtempera-2024/2,
  title={Infrared temperature measurements on fast moving targets: A novel calibration approach},
  author={Sisti M, Falsetti C & Beard PF},
  journal={Measurement},
  volume={225},
  pages={113870-113870},
  publisher={Elsevier},
  year = "2024"
}

BibTeX

@inproceedings{understandingth-2023/6,
  title={Understanding Thermal Unsteadiness in Engine Representative Flows and Improved Methodologies for Derived Heat Transfer Calculations Using Thin-Film Gauges},
  author={Singh D, Beard PF, Cardwell D & Chana KS},
  booktitle={Volume 13B: Turbomachinery ??? Axial Flow Turbine Aerodynamics},
  year = "2023"
}

BibTeX

@article{measurementofin-2023/6,
  title={Measurement of Inertial and Acoustic Waves in a Turbine Chute Rim Seal Cavity},
  author={Bru Revert A, Beard PF & Chew JW},
  journal={Journal of Engineering for Gas Turbines and Power},
  volume={145},
  publisher={ASME International},
  year = "2023"
}

@inproceedings{alargescalehigh-2023/1,
  title={A LARGE-SCALE HIGH PRESSURE AND TEMPERATURE AIR SYSTEM TO ENABLE REPRESENTATIVE METAL EFFECTIVENESS IN MULTIPLE GAS TURBINE FACILITIES},
  author={Goodenough J, Messenger A & Beard PF},
  year = "2023"
}

@inproceedings{alargescalehigh-2023/1,
  title={A LARGE-SCALE HIGH PRESSURE AND TEMPERATURE AIR SYSTEM TO ENABLE REPRESENTATIVE METAL EFFECTIVENESS IN MULTIPLE GAS TURBINE FACILITIES},
  author={Goodenough J, Messenger A & Beard PF},
  year = "2023"
}

BibTeX

@article{investigationof-2022/10,
  title={Investigation of a high-pressure turbine stage in a high-speed rotating transient test facility for rotor tip study and a parametric study for improved heat transfer calculation},
  author={Singh D, Beard P, Cardwell D & Chana KS},
  journal={Journal of Engineering for Gas Turbines and Power},
  volume={144},
  number={121020},
  publisher={ASME International},
  year = "2022"
}

BibTeX

@inproceedings{measurementofin-2022/6,
  title={Measurement of Inertial and Acoustic Waves in a Turbine Chute Rim Seal Cavity},
  author={Bru Revert A, Beard PF & Chew JW},
  booktitle={Volume 6B: Heat Transfer ??? General Interest/Additive Manufacturing Impacts on Heat Transfer; Internal Air Systems; Internal Cooling},
  year = "2022"
}

BibTeX

@inproceedings{investigationof-2022/6,
  title={Investigation of a High-Pressure Turbine Stage in a High-Speed Rotating Transient Test Facility for Rotor Tip Study and a Parametric Study for Improved Heat Transfer Calculation},
  author={Singh D, Beard PF, Cardwell D & Chana KS},
  booktitle={Volume 10B: Turbomachinery ??? Axial Flow Turbine Aerodynamics; Deposition, Erosion, Fouling, and Icing; Radial Turbomachinery Aerodynamics},
  year = "2022"
}

BibTeX

@inproceedings{areviewofhighsp-2022/6,
  title={A Review of High-Speed Rotating HP Turbine Heat Transfer and Cooling Studies Over the Last Decade in the Oxford Turbine Research Facility},
  author={Falsetti C, Beard PF, Cardwell DN & Chana KS},
  booktitle={Volume 10B: Turbomachinery ??? Axial Flow Turbine Aerodynamics; Deposition, Erosion, Fouling, and Icing; Radial Turbomachinery Aerodynamics},
  year = "2022"
}

BibTeX

@inproceedings{turbinebroadban-2021/11,
  title={Turbine broadband noise predictions using linearised frequency domain navier-stokes solvers ???},
  author={Bl??zquez-Navarro R & Corral R},
  year = "2021"
}

BibTeX

@article{flowandingestio-2021/9,
  title={Flow and Ingestion in a Turbine Disc Cavity under Rotationally-Dominated Conditions},
  author={Bru Revert A, Beard PF & Chew JW},
  journal={INTERNATIONAL JOURNAL OF TURBOMACHINERY PROPULSION AND POWER},
  volume={6},
  number={ARTN 29},
  year = "2021"
}

BibTeX

@inproceedings{computationalan-2021/8,
  title={Computational and Experimental Assessment of Rim Sealing Flows in Axial Turbine Chute Rim Seals},
  author={Palermo DM, Bru Revert A, Gao F, Amirante D, Chew J et al.},
  booktitle={AIAA Propulsion and Energy 2021 Forum},
  year = "2021"
}

BibTeX

@article{performanceofat-2021/8,
  title={Performance of a Turbine Rim Seal Subject to Rotationally-Driven and Pressure-Driven Ingestion},
  author={Bru Revert A, Beard PF, Chew JW & Bottenheim S},
  journal={JOURNAL OF ENGINEERING FOR GAS TURBINES AND POWER-TRANSACTIONS OF THE ASME},
  volume={143},
  number={81025},
  year = "2021"
}

BibTeX

@inproceedings{aconceptualstud-2021/8,
  title={A conceptual study to characterize properties of space debris from hypervelocity impacts through Thin Film Heat Flux Gauges},
  author={Barilaro L, Falsetti C, Olivieri L, Giacomuzzo C, Francesconi A et al.},
  pages={430-435},
  year = "2021"
}

BibTeX

@article{wallmodeledlarg-2021/6,
  title={Wall-Modeled Large Eddy Simulations of Axial Turbine Rim Sealing},
  author={Palermo DM, Gao F, Amirante D, Chew JW, Bru Revert A et al.},
  journal={JOURNAL OF ENGINEERING FOR GAS TURBINES AND POWER-TRANSACTIONS OF THE ASME},
  volume={143},
  number={61025},
  year = "2021"
}

BibTeX

@inproceedings{sealingperforma-2021/5,
  title={Sealing Performance of a Turbine Rim Chute Seal under Rotationally-Induced Ingestion},
  author={Revert A, Beard P, Chew J & Bottenheim S},
  booktitle={18th International Symposium on Transport Phenomena and Dynamics of Rotating Machinery (ISROMAC18)},
  year = "2021"
}

BibTeX

@inproceedings{infraredtempera-2021/4,
  title={Infrared temperature measurements on high pressure turbine blades in the Oxford Turbine Research Facility: calibration and image processing techniques},
  author={Sisti M, Falsetti C, Beard P & Chana K},
  booktitle={14th European Conference on Turbomachinery Fluid Dynamics and Thermodynamics (ECT 2021)},
  year = "2021"
}

BibTeX

@article{impactofrotorca-2021/3,
  title={Impact of rotor-casing effusion cooling on turbine performance and operating point: an experimental, computational, and theoretical study},
  author={Adams MG, Adami P, Collins M, Beard PF, Chana KS et al.},
  journal={Journal of Turbomachinery},
  volume={143},
  number={31005},
  publisher={American Society of Mechanical Engineers },
  year = "2021"
}

BibTeX

@article{infraredthermog-2021/3,
  title={Infrared thermography and calibration techniques for gas turbine applications: A review},
  author={Falsetti C, Sisti M & Beard P},
  journal={INFRARED PHYSICS & TECHNOLOGY},
  volume={113},
  number={ARTN 103574},
  year = "2021"
}

BibTeX

@article{effectofacombin-2021/2,
  title={Effect of a combined hot-streak and swirl profile on cooled 1.5-stage turbine aerodynamics: an experimental and computational study},
  author={Adams MG, Beard PF, Stokes MR, Wallin F, Chana KS et al.},
  journal={Journal of Turbomachinery},
  volume={143},
  number={21011},
  publisher={American Society of Mechanical Engineers},
  year = "2021"
}

BibTeX

@inproceedings{aconceptualstud-2021/1,
  title={A conceptual study to characterize properties of space debris from hypervelocity impacts through Thin Film Heat Flux Gauges},
  author={Barilaro L, Falsetti C, Olivieri L, Giacomuzzo C, Francesconi A et al.},
  booktitle={2021 IEEE International Workshop on Metrology for AeroSpace},
  pages={430-435},
  year = "2021"
}

@inproceedings{infraredtempera-2021/1,
  title={Infrared temperature measurements on high pressure turbine blades in the Oxford Turbine Research Facility: Calibration and image processing techniques},
  author={Sisti M, Falsetti C, Chana KS & Beard PF},
  year = "2021"
}

BibTeX

@article{heatedthinfilmg-2020/11,
  title={Heated thin film gauge arrangements to reduce uncertainty in transient heat transfer measurements},
  author={Usandizaga I, Beard P, Chana K & Povey T},
  journal={Measurement Science and Technology},
  volume={32},
  number={015906},
  publisher={IOP Publishing},
  year = "2020"
}

BibTeX

@inproceedings{wallmodelledlar-2020/9,
  title={Wall-Modelled Large Eddy Simulations of Axial Turbine Rim Sealing},
  author={Palermo DM, Gao F, Amirante D, Chew JW, Bru Revert A et al.},
  booktitle={Volume 7C: Heat Transfer},
  year = "2020"
}

BibTeX

@inproceedings{performanceofat-2020/9,
  title={Performance of a Turbine Rim Seal Subject to Rotationally-Driven and Pressure-Driven Ingestion},
  author={Bru Revert A, Beard PF, Chew JW & Bottenheim S},
  booktitle={Volume 7C: Heat Transfer},
  year = "2020"
}

BibTeX

@article{commissioningof-2020/1,
  title={Commissioning of a combined hot-streak and swirl profile generator in a transonic turbine test facility},
  author={Adams MG, Povey T, Hall BF, Cardwell D, Chana K et al.},
  journal={Journal of Engineering for Gas Turbines and Power},
  volume={142},
  number={31008},
  publisher={American Society of Mechanical Engineers},
  year = "2020"
}

BibTeX

@inproceedings{effectofannulus-2019/6,
  title={Effect of Annulus Flow Conditions on Turbine Rim Seal Ingestion},
  author={Palermo DM, Gao F, Chew JW & Beard PF},
  booktitle={Volume 5B: Heat Transfer},
  year = "2019"
}

BibTeX

@inproceedings{thelemcotecstag-2019/1,
  title={The LEMCOTEC 1?? Stage Film-Cooled HP Turbine: Design, Integration and Testing in the Oxford Turbine Research Facility},
  author={Beard PF, Adams MG, Nagawakar JR, Stokes MR, Wallin F et al.},
  booktitle={13th European Conference on Turbomachinery Fluid Dynamics and Thermodynamics},
  year = "2019"
}

@inproceedings{thelemcotecstag-2019/1,
  title={The lemcotec 1?? stage film-cooled HP turbine: Design, integration and testing in the Oxford turbine research facility},
  author={Beard PF, Adams MG, Nagawakar JR, Stokes MR, Wallin F et al.},
  year = "2019"
}

BibTeX

@inproceedings{advancednumeric-2018/6,
  title={Advanced Numerical Simulation of Turbine Rim Seal Flows and Consideration for RANS Turbulence Modelling},
  author={Gao F, Poujol N, Chew JW & Beard PF},
  booktitle={Volume 5B: Heat Transfer},
  pages={v05bt15a005-v05bt15a005},
  year = "2018"
}

BibTeX

@article{largeeddysimula-2018/4,
  title={Large-eddy simulation of unsteady turbine rim sealing flows},
  author={Gao F, Chew JW, Beard PF, Amirante D & Hills NJ},
  journal={International Journal of Heat and Fluid Flow},
  volume={70},
  pages={160-170},
  publisher={Elsevier},
  year = "2018"
}

BibTeX

@article{predictionandme-2017/6,
  title={Prediction and measurement of the heat transfer coefficient in a direct oil-cooled electrical machine with segmented stator},
  author={Camilleri R, Beard P, Howey D & McCulloch MD},
  journal={IEEE Transactions on Industrial Electronics},
  volume={65},
  pages={94-102},
  publisher={IEEE},
  year = "2017"
}

BibTeX

@inproceedings{ecatanenginecom-2017/6,
  title={ECAT: An Engine Component Aerothermal Facility at the University of Oxford},
  author={Kirollos B, Lubbock R, Beard P, Goenaga F, Rawlinson A et al.},
  booktitle={Volume 2A: Turbomachinery},
  pages={v02at40a032-v02at40a032},
  year = "2017"
}

BibTeX

@inproceedings{ecatanenginecom-2017/1,
  title={ECAT: An engine component aerothermal facility at the University of Oxford},
  author={Kirollos B, Lubbock R, Beard P, Goenaga F, Rawlinson A et al.},
  year = "2017"
}

BibTeX

@inproceedings{numericalstudie-2017/1,
  title={Numerical studies of turbine rim sealing flows on a chute seal configuration},
  author={Gao F, Chew JW, Beard PF, Amirante D & Hills NJ},
  year = "2017"
}

BibTeX

@inproceedings{unsteadyflowphe-2016/9,
  title={Unsteady flow phenomena in turbine rim seals},
  author={Beard P, Chew J, Gao F & Chana K},
  booktitle={ASME Turbo Expo 2016: Turbomachinery Technical Conference and Exposition},
  year = "2016"
}

BibTeX

@article{unsteadyflowphe-2016/9,
  title={Unsteady flow phenomena in turbine rim seals},
  author={Beard PF, Gao F, Chana K & Chew J},
  journal={Journal of Engineering for Gas Turbines and Power},
  volume={139},
  number={032501},
  publisher={American Society of Mechanical Engineers},
  year = "2016"
}

@inproceedings{measuringthehea-2015/9,
  title={Measuring the heat transfer coefficient in a direct oil-cooled electrical machine using thin film heat flux gauges},
  author={Camilleri R, Beard P, Howey D & McCulloch M},
  booktitle={14th UK Heat Transfer Conference & ThermaPOWER Meetings},
  year = "2015"
}

BibTeX

@article{effectofcombust-2013/9,
  title={Effect of combustor swirl on transonic high pressure turbine efficiency},
  author={Beard PF, Smith AD & Povey T},
  journal={Journal of Turbomachinery},
  volume={136},
  year = "2013"
}

BibTeX

@article{impactofseveret-2012/10,
  title={Impact of Severe Temperature Distortion on Turbine Efficiency},
  author={Beard PF, Smith A & Povey T},
  journal={Journal of Turbomachinery},
  volume={135},
  year = "2012"
}

BibTeX

@inproceedings{impactofseveret-2011/12,
  title={Impact of severe temperature distortion on turbine efficiency},
  author={Beard PF, Smith A & Povey T},
  pages={681-694},
  year = "2011"
}

BibTeX

@article{experimentaland-2011/12,
  title={Experimental and computational fluid dynamics investigation of the efficiency of an unshrouded transonic high pressure turbine},
  author={Beard PF, Smith AD & Povey T},
  journal={Proceedings of the Institution of Mechanical Engineers, Part A: Journal of Power and Energy},
  volume={225},
  pages={1166-1179},
  year = "2011"
}

BibTeX

@article{directshafttorq-2011/1,
  title={Direct shaft torque measurements in a transient turbine facility},
  author={Beard PF & Povey T},
  journal={Measurement Science and Technology},
  volume={22},
  year = "2011"
}

BibTeX

@article{experimentaland-2011/,
  title={Experimental and computational fluid dynamics investigation of the efficiency of an unshrouded transonic high pressure turbine},
  author={Beard PF, Smith AD & Povey T},
  journal={PROCEEDINGS OF THE INSTITUTION OF MECHANICAL ENGINEERS PART A-JOURNAL OF POWER AND ENERGY},
  volume={225},
  pages={1166-1179},
  year = "2011"
}

BibTeX

@article{turbineefficien-2010/1,
  title={Turbine efficiency measurement system for the QinetiQ turbine test facility},
  author={Beard PF, Povey T & Chana KS},
  journal={Journal of Turbomachinery},
  volume={132},
  year = "2010"
}

@inproceedings{efficiencyofanu-2009/1,
  title={Efficiency of an unshrouded transonic hp turbine: An experimental and computational study},
  author={Beard PF, Povey T, Smith A & Ireland PT},
  pages={1435-1448},
  year = "2009"
}