Publications

BibTeX

@article{understandingth-2024/2,
  title={Understanding Thermal Unsteadiness in Engine Representative Flows and Improved Methodologies for Derived Heat Transfer Calculations Using Thin-Film Gauges},
  author={Singh D, Beard PF, Cardwell D & Chana KS},
  journal={Journal of Turbomachinery},
  volume={146},
  publisher={ASME International},
  year = "2024"
}

BibTeX

@inproceedings{understandingth-2023/6,
  title={Understanding Thermal Unsteadiness in Engine Representative Flows and Improved Methodologies for Derived Heat Transfer Calculations Using Thin-Film Gauges},
  author={Singh D, Beard PF, Cardwell D & Chana KS},
  booktitle={Volume 13B: Turbomachinery — Axial Flow Turbine Aerodynamics},
  year = "2023"
}

BibTeX

@article{investigationof-2022/10,
  title={Investigation of a high-pressure turbine stage in a high-speed rotating transient test facility for rotor tip study and a parametric study for improved heat transfer calculation},
  author={Singh D, Beard P, Cardwell D & Chana KS},
  journal={Journal of Engineering for Gas Turbines and Power},
  volume={144},
  number={121020},
  publisher={ASME International},
  year = "2022"
}

BibTeX

@inproceedings{investigationof-2022/6,
  title={Investigation of a High-Pressure Turbine Stage in a High-Speed Rotating Transient Test Facility for Rotor Tip Study and a Parametric Study for Improved Heat Transfer Calculation},
  author={Singh D, Beard PF, Cardwell D & Chana KS},
  booktitle={Volume 10B: Turbomachinery — Axial Flow Turbine Aerodynamics; Deposition, Erosion, Fouling, and Icing; Radial Turbomachinery Aerodynamics},
  year = "2022"
}

BibTeX

@inproceedings{areviewofhighsp-2022/6,
  title={A Review of High-Speed Rotating HP Turbine Heat Transfer and Cooling Studies Over the Last Decade in the Oxford Turbine Research Facility},
  author={Falsetti C, Beard PF, Cardwell DN & Chana KS},
  booktitle={Volume 10B: Turbomachinery — Axial Flow Turbine Aerodynamics; Deposition, Erosion, Fouling, and Icing; Radial Turbomachinery Aerodynamics},
  year = "2022"
}

BibTeX

@article{developmentofan-2021/4,
  title={Development of a Novel Sensor for Gear Teeth Wear and Damage Detection},
  author={Sridhar V & Chana K},
  journal={International Journal of Prognostics and Health Management},
  volume={12},
  publisher={PHM Society},
  year = "2021"
}

BibTeX

@article{impactofrotorca-2021/3,
  title={Impact of rotor-casing effusion cooling on turbine performance and operating point: an experimental, computational, and theoretical study},
  author={Adams MG, Adami P, Collins M, Beard PF, Chana KS et al.},
  journal={Journal of Turbomachinery},
  volume={143},
  number={31005},
  publisher={American Society of Mechanical Engineers },
  year = "2021"
}

BibTeX

@article{effectofacombin-2021/2,
  title={Effect of a combined hot-streak and swirl profile on cooled 1.5-stage turbine aerodynamics: an experimental and computational study},
  author={Adams MG, Beard PF, Stokes MR, Wallin F, Chana KS et al.},
  journal={Journal of Turbomachinery},
  volume={143},
  number={21011},
  publisher={American Society of Mechanical Engineers},
  year = "2021"
}

BibTeX

@inproceedings{infraredtempera-2021/1,
  title={Infrared temperature measurements on high pressure turbine blades in the Oxford Turbine Research Facility: calibration and image processing techniques},
  author={Sisti M, Falsetti C, Beard P & Chana K},
  booktitle={14th European Conference on Turbomachinery Fluid Dynamics and Thermodynamics},
  year = "2021"
}

@inproceedings{infraredtempera-2021/1,
  title={Infrared temperature measurements on high pressure turbine blades in the Oxford Turbine Research Facility: Calibration and image processing techniques},
  author={Sisti M, Falsetti C, Chana KS & Beard PF},
  year = "2021"
}

BibTeX

@article{heatedthinfilmg-2020/11,
  title={Heated thin film gauge arrangements to reduce uncertainty in transient heat transfer measurements},
  author={Usandizaga I, Beard P, Chana K & Povey T},
  journal={Measurement Science and Technology},
  volume={32},
  number={015906},
  publisher={IOP Publishing},
  year = "2020"
}

BibTeX

@article{commissioningof-2020/1,
  title={Commissioning of a combined hot-streak and swirl profile generator in a transonic turbine test facility},
  author={Adams MG, Povey T, Hall BF, Cardwell D, Chana K et al.},
  journal={Journal of Engineering for Gas Turbines and Power},
  volume={142},
  number={31008},
  publisher={American Society of Mechanical Engineers},
  year = "2020"
}

BibTeX

@inproceedings{comparisonofthi-2019/11,
  title={Comparison of thin film heat flux gauge technologies emphasizing continuous-duration operation},
  author={Siroka S, Berdanier RA, Thole KA, Chana KS, Haldeman CW et al.},
  booktitle={ASME Turbo Expo 2019: Turbomachinery Technical Conference and Exposition},
  year = "2019"
}

BibTeX

@inproceedings{thelemcotecstag-2019/1,
  title={The LEMCOTEC 1½ Stage Film-Cooled HP Turbine: Design, Integration and Testing in the Oxford Turbine Research Facility},
  author={Beard PF, Adams MG, Nagawakar JR, Stokes MR, Wallin F et al.},
  booktitle={13th European Conference on Turbomachinery Fluid Dynamics and Thermodynamics},
  year = "2019"
}

BibTeX

@article{pilotstudyonani-2018/1,
  title={Pilot study on an innovative biosensor with a range of medical and surgical applications},
  author={Sains P, Chana KS, Sridhar V & Sajid },
  journal={BMC Research Notes},
  volume={11},
  pages={81},
  publisher={BioMed Central},
  year = "2018"
}

BibTeX

@article{comparisonoflar-2017/8,
  title={Comparison of large eddy simulation and unsteady Reynolds-averaged Navier–Stokes for evaluation of entropy noise},
  author={Ron E & Chana K},
  journal={Journal of Fluids Engineering},
  volume={139},
  number={111204},
  publisher={American Society of Mechanical Engineers},
  year = "2017"
}

BibTeX

@inproceedings{developmentofac-2017/8,
  title={Development of a combined eddy current and pressure sensor for gas turbine blade health monitoring},
  author={Sridhar V & Chana KS},
  booktitle={ASME Turbo Expo 2017: Turbomachinery Technical Conference and Exposition},
  year = "2017"
}

BibTeX

@inproceedings{tipclearancemea-2017/8,
  title={Tip-clearance measurements on an engine high pressure turbine using an eddy current sensor},
  author={Sridhar V & Chana KS},
  booktitle={ASME Turbo Expo 2017: Turbomachinery Technical Conference and Exposition},
  year = "2017"
}

BibTeX

@article{evaluationofemp-2017/5,
  title={Evaluation of empirical heat transfer models using TFG heat flux sensors},
  author={De Cuyper T, Broekaert S, Chana K, De Paepe M & Verhelst S},
  journal={APPLIED THERMAL ENGINEERING},
  volume={118},
  pages={561-569},
  year = "2017"
}

BibTeX

@inproceedings{hightemperature-2017/3,
  title={High temperature eddy current sensor system for turbine blade tip clearance measurements},
  author={Sridhar V, Chana KS & Pekris MJ},
  booktitle={12th European Conference on Turbomachinery Fluid Dynamics and Thermodynamics (ETC 2017)},
  year = "2017"
}

BibTeX

@article{applicationoffi-2017/2,
  title={Application of film cooling to an unshrouded high-pressure turbine casing},
  author={Collins M, Chana K & Povey T},
  journal={Journal of Turbomachinery},
  volume={139},
  pages={061010},
  publisher={American Society of Mechanical Engineers},
  year = "2017"
}

BibTeX

@inproceedings{hightemperature-2017/1,
  title={High temperature eddy current sensor system for turbine blade tip clearance measurements},
  author={Sridhar V, Chana K & Pekris M},
  booktitle={12th European Conference on Turbomachinery Fluid Dynamics and hermodynamics},
  year = "2017"
}

BibTeX

@inproceedings{computationalan-2017/1,
  title={Computational and experimental study of a platinum thin-film based oil condition and contamination sensor},
  author={Sridhar V, Chana KS & Singh D},
  year = "2017"
}

BibTeX

@inproceedings{unsteadyflowphe-2016/9,
  title={Unsteady flow phenomena in turbine rim seals},
  author={Beard P, Chew J, Gao F & Chana K},
  booktitle={ASME Turbo Expo 2016: Turbomachinery Technical Conference and Exposition},
  year = "2016"
}

BibTeX

@article{unsteadyflowphe-2016/9,
  title={Unsteady flow phenomena in turbine rim seals},
  author={Beard PF, Gao F, Chana K & Chew J},
  journal={Journal of Engineering for Gas Turbines and Power},
  volume={139},
  number={032501},
  publisher={American Society of Mechanical Engineers},
  year = "2016"
}

BibTeX

@article{effectoflownoxc-2016/9,
  title={Effect of low-NO X combustor swirl clocking on intermediate turbine duct vane aerodynamics with an upstream high pressure turbine stage — An experimental and computational study},
  author={Johansson M, Povey T, Chana K & Abrahamsson H},
  journal={Journal of Turbomachinery},
  volume={139},
  pages={011006},
  publisher={American Society of Mechanical Engineers},
  year = "2016"
}

BibTeX

@inproceedings{applicationoffi-2016/9,
  title={Application of film cooling to an unshrouded HP turbine casing},
  author={Collins M, Chana K & Povey T},
  booktitle={ASME Turbo Expo 2016: Turbomachinery Technical Conference and Exposition},
  year = "2016"
}

@inproceedings{theuseofeddycur-2016/6,
  title={The use of eddy current sensors for the measurement of rotor blade tip timing: sensor development and engine testing},
  author={Chana K, Sridhar V & Singh D},
  year = "2016"
}

BibTeX

@article{improvedmethodo-2016/5,
  title={Improved methodologies for time-resolved heat transfer measurements, demonstrated on an unshrouded transonic turbine casing},
  author={Collins M, Chana K & Povey T},
  journal={Journal of Turbomachinery},
  volume={138},
  pages={111007-111007},
  publisher={American Society of Mechanical Engineers},
  year = "2016"
}

@inproceedings{anovelsensorfor-2016/1,
  title={A novel sensor for detection of oil condition and contamination based on a thermal approach},
  author={Chana K & Sridhar V},
  year = "2016"
}

@inproceedings{theeffectofring-2016/1,
  title={The effect of ringing combustion on the wall heat flux during HCCI operation},
  author={Broekaert S, De Cuyper T, Chana K, De Paepe M & Verhelst S},
  year = "2016"
}

@inproceedings{heatfluxmeasure-2016/1,
  title={Heat flux measurements using thin film gauges in a production engine},
  author={De Cuyper T, Broekaert S, Chana K, De Paepe M & Verhelst S},
  year = "2016"
}

BibTeX

@inproceedings{aerothermalmeas-2015/8,
  title={Aerothermal measurements and predictions of an intermediate turbine duct turning vane},
  author={Johansson M, Martensson J, Abrahamsson H, Povey T & Chana K},
  booktitle={ASME Turbo Expo 2015: Turbine Technical Conference and Exposition},
  year = "2015"
}

BibTeX

@inproceedings{improvedmethodo-2015/6,
  title={Improved Methodologies for Time Resolved Heat Transfer Measurements, Demonstrated on an Unshrouded Transonic Turbine Casing},
  author={Collins M, Chana K & Povey T},
  booktitle={Volume 5B: Heat Transfer},
  pages={v05bt13a020-v05bt13a020},
  year = "2015"
}

BibTeX

@article{calibrationofat-2015/4,
  title={Calibration of a TFG sensor for heat flux measurements in a S.I. engine},
  author={de Cuyper T, Fossaert G, Collet O, Broekaert S, Chana K et al.},
  journal={SAE International Journal of Engines},
  volume={8},
  number={2015-01-1645},
  pages={1692-1700},
  publisher={SAE International},
  year = "2015"
}

BibTeX

@inproceedings{assessmentofemp-2015/4,
  title={Assessment of empirical heat transfer models for a CFR engine operated in HCCI mode},
  author={Broekaert S, De Cuyper T, Chana K, De Paepe M & Verhelst S},
  booktitle={SAE 2015 World Congress & Exhibition},
  year = "2015"
}

BibTeX

@article{newtechniquefor-2015/1,
  title={New technique for the fabrication of miniature thin film heat flux gauges},
  author={Collins M, Chana K & Povey T},
  journal={Measurement Science and Technology},
  volume={26},
  pages={025303},
  publisher={IOP Publishing},
  year = "2015"
}

BibTeX

@article{designofanonrea-2014/8,
  title={Design of a Nonreacting Combustor Simulator With Swirl and Temperature Distortion With Experimental Validation},
  author={Hall BF, Chana KS & Povey T},
  journal={Journal of Engineering for Gas Turbines and Power},
  volume={136},
  pages={081501},
  publisher={ASME International},
  year = "2014"
}

BibTeX

@inproceedings{aerodynamicandh-2014/6,
  title={Aerodynamic and Heat Transfer Measurements on an Intermediate Turbine Duct Vane},
  author={Johansson M, Povey T, Chana K, Wallin F & Abrahamsson H},
  booktitle={Volume 2A: Turbomachinery},
  pages={v02at40a003-v02at40a003},
  year = "2014"
}

BibTeX

@inproceedings{thedevelopmento-2013/12,
  title={The development of a new concept for gear teeth wear and damage detection},
  author={Chana KS, Cardwell MT & Sullivan JS},
  year = "2013"
}

BibTeX

@inproceedings{areviewoftheoxf-2013/12,
  title={A review of the Oxford Turbine Research Facility},
  author={Chana K, Cardwell D & Jones T},
  year = "2013"
}

BibTeX

@inproceedings{designofanonrea-2013/12,
  title={Design of a non-reacting combustor simulator with swirl and temperature distortion with experimental validation},
  author={Hall BF, Chana KS & Povey T},
  year = "2013"
}

BibTeX

@inproceedings{thedevelopmento-2013/12,
  title={The development of a hot section eddy current sensor for turbine tip clearance measurement},
  author={Chana KS, Cardwell MT & Sullivan JS},
  year = "2013"
}

BibTeX

@article{erratatoanalysi-2013/11,
  title={Errata to "analysis on the effect of a nonuniform inlet profile on heat transfer and fluid flow in turbine stages" [Journal of turbomachinery, 134(1), 011012]},
  author={Salvadori S, Montomoli F, Martelli F, Chana KS, Qureshi I et al.},
  journal={Journal of Turbomachinery},
  volume={135},
  year = "2013"
}

BibTeX

@article{applyingdesigno-2013/1,
  title={Applying design of experiments to develop a fuel independent heat transfer model for spark ignition engines},
  author={Demuynck J, Chana K, De Paepe M, Sileghem L, Vancoillie J et al.},
  journal={Lecture Notes in Electrical Engineering},
  volume={190 LNEE},
  pages={1165-1177},
  year = "2013"
}

BibTeX

@article{evaluationofafl-2013/1,
  title={Evaluation of a flow-field-based heat transfer model for premixed spark-ignition engines on hydrogen},
  author={Demuynck J, Chana K, De Paepe M & Verhelst S},
  journal={SAE Technical Papers},
  volume={2},
  year = "2013"
}

BibTeX

@article{evaluationofafl-2013/,
  title={Evaluation of a flow-field-based heat transfer model for premixed spark-ignition engines on hydrogen},
  author={Demuynck J, Chana K, De Paepe M & Verhelst S},
  journal={SAE Technical Papers},
  volume={2},
  year = "2013"
}

BibTeX

@article{effectofaggress-2012/9,
  title={Effect of aggressive inlet swirl on heat transfer and aerodynamics in an unshrouded transonic hp turbine},
  author={Qureshi I, Beretta A, Chana K & Povey T},
  journal={Journal of Turbomachinery},
  volume={134},
  year = "2012"
}

BibTeX

@article{applyingdesigno-2012/4,
  title={Applying Design of Experiments to Determine the Effect of Gas Properties on In-Cylinder Heat Flux in a Motored SI Engine},
  author={Chana K},
  journal={SAE International},
  year = "2012"
}

BibTeX

@article{effectofaggress-2011/12,
  title={Effect of aggressive inlet swirl on heat transfer and aerodynamics in an unshrouded transonic HP turbine},
  author={Qureshi I, Beretta A, Chana K & Povey T},
  journal={Proceedings of the ASME Turbo Expo},
  volume={5},
  pages={1457-1469},
  year = "2011"
}