Publications

@inproceedings{systemstudyofan-2024/4,
  title={System study of an integrated facility with arc-jet and expansion tube for hypervelocity testing with ablating spacecraft models},
  author={Chang EWK & Hermann T},
  booktitle={The 3rd International Conference on High-Speed Vehicle Science and Technology},
  year = "2024"
}

@inproceedings{expansiontubeca-2024/4,
  title={Expansion tube capabilities for studying boost-glide re-entry conditions},
  author={Lin Y, Wallington JJ, Bui T, van den Herik T, James CM et al.},
  booktitle={The 3rd International Conference on High-Speed Vehicle Science and Technology},
  year = "2024"
}

BibTeX

@inproceedings{experimentalcha-2024/1,
  title={Experimental characterization of a small scale arc-jet flow using a spatially resolved UV-nIR Spectroscopy System},
  author={Buquet M, Chang E, Williams B & Hermann T},
  booktitle={AIAA SciTech Forum},
  year = "2024"
}

BibTeX

@inproceedings{developmentandt-2024/1,
  title={Development and Testing of Slug Calorimeter and Total Pressure Probes for a Miniaturized Arc-jet},
  author={Valeinis O, Chang EWK & Hermann T},
  booktitle={AIAA SCITECH 2024 Forum},
  year = "2024"
}

BibTeX

@inproceedings{experimentalinv-2024/1,
  title={Experimental Investigation of a Small-scale Arc-jet for Earth Entry Simulation},
  author={Schaefer J, Chang EWK, Hermann T & Loehle S},
  booktitle={AIAA SCITECH 2024 Forum},
  year = "2024"
}

BibTeX

@article{opticaltemperat-2024/1,
  title={Optical temperature measurement in unsteady plasma free jet},
  author={Hermann T & Chang EWK},
  journal={Measurement Science and Technology},
  volume={35},
  number={055204},
  publisher={IOP Publishing},
  year = "2024"
}

BibTeX

@inproceedings{simulationofalo-2024/1,
  title={Simulation of a low enthalpy ablator into a hypersonic boundary-layer},
  author={Condren WJ, Hermann T & McGilvray M},
  booktitle={2024 AIAA Science and Technology Forum and Exposition (AIAA SciTech Forum)},
  year = "2024"
}

BibTeX

@article{analyticalmodel-2023/5,
  title={Analytical model of transpired-coolant concentration at downstream wall in high-speed laminar flow},
  author={Ifti HS, Hermann T & McGilvray M},
  journal={AIAA Journal},
  volume={61},
  pages={3541-3550},
  publisher={American Institute of Aeronautics and Astronautics},
  year = "2023"
}

BibTeX

@article{experimentalstu-2023/1,
  title={Experimental studies of hypersonic shock impingement on a transpiration-cooled flat plate},
  author={Naved I, Hermann T, Hambidge C & McGilvray M},
  journal={Journal of Spacecraft and Rockets},
  volume={60},
  pages={873-883},
  publisher={American Institute of Aeronautics and Astronautics},
  year = "2023"
}

BibTeX

@inproceedings{integrationofar-2023/1,
  title={Integration of arc-jet in impulse facility for hypervelocity aerothermal testing with ablation},
  author={Chang EWK, Joglekar C, McGilvray M & Hermann T},
  booktitle={AIAA SCITECH 2023 Forum},
  year = "2023"
}

BibTeX

@inproceedings{developmentofsm-2023/1,
  title={Development of small scale arc-jet facility OPG1},
  author={Hermann T, Chang EWK, Schaefer J, Joglekar C & Boehrk H},
  booktitle={AIAA SCITECH 2023 Forum},
  year = "2023"
}

BibTeX

@inproceedings{integrationofar-2023/1,
  title={Integration of arc-jet in impulse facility for hypervelocity aerothermal testing with ablation},
  author={Chang EWK, Joglekar C, McGilvray M & Hermann T},
  booktitle={AIAA SCITECH 2023 Forum},
  year = "2023"
}

BibTeX

@article{transpirationco-2022/10,
  title={Transpiration-cooling heat transfer experiments in laminar and turbulent hypersonic flows},
  author={Naved I, Hermann T, Hambidge C, Ifti HS, Falsetti C et al.},
  journal={Journal of Thermophysics and Heat Transfer},
  volume={37},
  pages={281-295},
  publisher={American Institute of Aeronautics and Astronautics},
  year = "2022"
}

BibTeX

@article{transpirationco-2022/10,
  title={Transpiration-Cooling Heat Transfer Experiments in Laminar and Turbulent Hypersonic Flows},
  author={Naved I, Hermann T, Hambidge C, Ifti H, Falsetti C et al.},
  journal={Journal of Thermophysics and Heat Transfer},
  publisher={American Institute of Aeronautics and Astronautics},
  year = "2022"
}

@inproceedings{emissionspectro-2022/9,
  title={Emission spectroscopy of low density air shock tube flows above 10 km/s},
  author={Hermann T, Collen P, Glenn A, Sopek T, McGilvray M et al.},
  booktitle={9th International Workshop on Radiation of High Temperature Gases for Space Missions},
  year = "2022"
}

@inproceedings{quantifyingthes-2022/9,
  title={Quantifying the surface heat transfer on transpiration cooled porous materials in laminar and turbulent hypersonic boundary layers},
  author={Naved I, Hermann T, Hambidge C, Ifti HS, McGilvray M et al.},
  booktitle={2nd International Conference on High-Speed Vehicle Science Technology},
  year = "2022"
}

BibTeX

@article{heattransfermea-2022/9,
  title={Heat transfer measurements of a transpiration-cooled stagnation point in transient hypersonic flow},
  author={Naved I, Hermann T, McGilvray M, Ewenz Rocher M, Hambidge C et al.},
  journal={Journal of Thermophysics and Heat Transfer},
  volume={37},
  number={2},
  publisher={American Institute of Aeronautics and Astronautics},
  year = "2022"
}

BibTeX

@article{numericalsimula-2022/6,
  title={Numerical simulation of transpiration cooling in a laminar hypersonic boundary layer},
  author={Ifti HS, Hermann T, McGilvray M & Merrifield J},
  journal={Journal of Spacecraft and Rockets},
  volume={59},
  pages={1726-1735},
  publisher={American Institute of Aeronautics and Astronautics},
  year = "2022"
}

BibTeX

@article{laminartranspir-2022/6,
  title={Laminar transpiration cooling experiments in hypersonic flow},
  author={Ifti HS, Hermann T, Rocher ME, Doherty L, Hambidge C et al.},
  journal={Experiments in Fluids},
  volume={63},
  number={102},
  publisher={Springer},
  year = "2022"
}

BibTeX

@article{oxidationrespon-2022/5,
  title={Oxidation response of transpiration-cooled ZrB2 on a hypersonic stagnation point},
  author={Ewenz Rocher M, Hermann T & McGilvray M},
  journal={Journal of Spacecraft and Rockets},
  volume={59},
  pages={1486-1495},
  publisher={American Institute of Aeronautics and Astronautics},
  year = "2022"
}

BibTeX

@article{measuringthecon-2022/4,
  title={Measuring the concentration of freestream species on a hypersonic transpiration-cooled stagnation point},
  author={Ewenz Rocher M, Hermann T, McGilvray M, Grossman M & Vandeperre L},
  journal={Journal of Spacecraft and Rockets},
  volume={59},
  pages={1380-1387},
  publisher={American Institute of Aeronautics and Astronautics},
  year = "2022"
}

BibTeX

@article{flowcharacteriz-2022/2,
  title={Flow characterization of porous ultra-high-temperature ceramics for transpiration cooling},
  author={Ifti HS, Hermann T, McGilvray M, Larrimbe L, Hedgecock R et al.},
  journal={AIAA JOURNAL},
  volume={60},
  pages={3286-3297},
  publisher={American Institute of Aeronautics and Astronautics},
  year = "2022"
}

BibTeX

@article{correlationfors-2022/1,
  title={Correlation for species concentration on a hypersonic stagnation point with mass injection},
  author={Ewenz Rocher M, Hermann T, McGilvray M & Gollan R},
  journal={AIAA Journal},
  volume={60},
  pages={2798-2809},
  publisher={American Institute of Aeronautics and Astronautics},
  year = "2022"
}

BibTeX

@inproceedings{measuringthecon-2022/1,
  title={Measuring the concentration of freestream species on a transpiration cooled stagnation point},
  author={Ewenz Rocher M, Hermann T, McGilvray M, Ravichandran R, Watson M et al.},
  booktitle={AIAA SCITECH 2022 Forum},
  year = "2022"
}

BibTeX

@misc{correlationfors-2022/1,
  title={Correlation for Species Concentration on a Hypersonic Stagnation Point with Mass Injection - Dataset},
  author={Ewenz Rocher M, Hermann T, McGilvray M & Gollan R},
  year = "2022"
}

BibTeX

@misc{measuringthecon-2022/1,
  title={Measuring the concentration of freestream species on a hypersonic transpiration-cooled stagnation point - Dataset},
  author={Ewenz Rocher M, Hermann T, McGilvray M, Grossman M & Vandeperre L},
  year = "2022"
}

BibTeX

@misc{oxidationrespon-2022/1,
  title={Oxidation Response of Transpiration Cooled ZrB2 on a Hypersonic Stagnation Point - Dataset},
  author={Ewenz Rocher M, Hermann T & McGilvray M},
  year = "2022"
}

BibTeX

@misc{heattransfermea-2022/1,
  title={Heat Transfer Measurements of a Transpiration-Cooled Stagnation Point in Transient Hypersonic Flow - Dataset},
  author={Naved I, Hermann T, McGilvray M, Ewenz Rocher M, Hambidge C et al.},
  year = "2022"
}

BibTeX

@misc{laminartranspir-2022/1,
  title={Laminar transpiration cooling experiments in hypersonic flow - Dataset},
  author={Ifti HS, Hermann T, Ewenz Rocher M, Doherty L, Hambidge C et al.},
  year = "2022"
}

BibTeX

@misc{analyticalsolut-2022/1,
  title={Analytical Solution of Flows in Porous Media for Transpiration Cooling Applications - Dataset},
  author={Hermann T & McGilvray M},
  year = "2022"
}

BibTeX

@misc{threedimensiona-2022/1,
  title={Three Dimensional Focusing Schlieren Using A Plenoptic Camera - Dataset},
  author={Hermann T, Kerth P & McGilvray M},
  year = "2022"
}

BibTeX

@misc{flowcharacteriz-2022/1,
  title={Flow Characterization of Porous Ultra-High-Temperature Ceramics for Transpiration Cooling - Dataset},
  author={Ifti HS, Hermann T, McGilvray M, Larrimbe L, Hedgecock R et al.},
  year = "2022"
}

BibTeX

@misc{toolforrapidtra-2022/1,
  title={Tool for Rapid Transient Transpiration Cooled Re-Entry Simulation - Dataset},
  author={Hermann T, Naved I & McGilvray M},
  year = "2022"
}

BibTeX

@misc{numericalsimula-2022/1,
  title={Numerical Simulation of Transpiration Cooling in a Laminar Hypersonic Boundary Layer - Dataset},
  author={Ifti HS, Hermann T, McGilvray M & Merrifield J},
  year = "2022"
}

BibTeX

@misc{conditiondevelo-2022/1,
  title={CONDITION DEVELOPMENT AND COMMISSIONING OF THE OXFORD T6 STALKER TUNNEL IN REFLECTED SHOCK TUNNEL MODE - Dataset},
  author={Hermann T, Subiah S-D, Collen P, Penty Geraets R, Hyslop A et al.},
  year = "2022"
}

BibTeX

@misc{numericalsimula-2022/1,
  title={Numerical Simulation of Transpiration Cooling for a High-Speed Vehicle with Substructure - Dataset},
  author={Naved I, Hermann T & McGilvray M},
  year = "2022"
}

BibTeX

@misc{performanceoftr-2022/1,
  title={Performance of Transpiration Cooled Heat Shields for Re-entry Vehicles - Dataset},
  author={Hermann T, McGilvray M & Naved I},
  year = "2022"
}

BibTeX

@misc{thermalimpulser-2022/1,
  title={Thermal Impulse Response in Porous Media for Transpiration Cooling Systems - Dataset},
  author={Hermann T, McGilvray M, Ifti HS, Hufgard F & Löhle S},
  year = "2022"
}

BibTeX

@misc{mixingcharacter-2022/1,
  title={Mixing Characteristics in a Hypersonic Flow around a Transpiration Cooled Flat Plate Model - Dataset},
  author={Hermann T, Ifti HS, McGilvray M, Doherty L & Penty Geraets R},
  year = "2022"
}

BibTeX

@misc{pressuresensiti-2022/1,
  title={Pressure‑sensitive paint diagnostic to measure species concentration on transpiration‑cooled walls - Dataset},
  author={Ewenz Rocher M, Hermann T, McGilvray M, Ifti HS, Vieira J et al.},
  year = "2022"
}

BibTeX

@article{pressuresensiti-2021/12,
  title={Pressure-sensitive paint diagnostic to measure species concentration on transpiration-cooled walls},
  author={Ewenz Rocher M, Hermann T, McGilvray M, Ifti HS, Vieira J et al.},
  journal={Experiments in Fluids},
  volume={63},
  number={2},
  publisher={Springer},
  year = "2021"
}

BibTeX

@article{assessmentofhig-2021/11,
  title={Assessment of high enthalpy flow conditions for re-entry aerothermodynamics in the plasma wind tunnel facilities at IRS},
  author={Loehle S, Fabian Z, Eberhart M, Hermann T, Meindl A et al.},
  journal={CEAS Space Journal},
  volume={14},
  pages={395-406},
  publisher={Springer},
  year = "2021"
}

BibTeX

@article{analyticalsolut-2021/3,
  title={Analytical solution of flows in porous media for transpiration cooling applications},
  author={Hermann T & McGilvray M},
  journal={Journal of Fluid Mechanics},
  volume={915},
  number={A38},
  publisher={Cambridge University Press},
  year = "2021"
}

BibTeX

@article{numericalsimula-2021/3,
  title={Numerical simulation of transpiration cooling for a high speed vehicle with substructure},
  author={Naved I, Hermann T & McGilvray M},
  journal={AIAA Journal},
  volume={59},
  pages={3043-3053},
  publisher={American Institute of Aeronautics and Astronautics},
  year = "2021"
}

BibTeX

@article{influenceofinst-2020/12,
  title={Influence of instability modes on cooling performance in hypersonic boundary layer with slot injection},
  author={Cerminara A, Hermann T, Ifti H, Deiterding R, Sandham N et al.},
  journal={Aerospace Science and Technology},
  volume={109},
  number={106409},
  publisher={Elsevier},
  year = "2020"
}

BibTeX

@article{plenumpressureb-2020/12,
  title={Plenum pressure behavior in transiently heat loaded transpiration cooling system},
  author={Hufgard F, Loehle S, McGilvray M, Hermann T, Schweikert S et al.},
  journal={Journal of Thermophysics and Heat Transfer},
  volume={35},
  pages={256-267},
  publisher={American Institute of Aeronautics and Astronautics},
  year = "2020"
}

BibTeX

@article{thermalimpulser-2020/1,
  title={Thermal impulse response in porous media for transpiration cooling systems},
  author={Hermann T, McGilvray M, Ifti H, Hufgard F & Löhle S},
  journal={Journal of Thermophysics and Heat Transfer},
  volume={34},
  publisher={American Institute of Aeronautics and Astronautics},
  year = "2020"
}

BibTeX

@article{correctionperfo-2020/1,
  title={Correction: Performance of transpiration-cooled heat shields for reentry vehicles (AIAA Journal, (2020) 58, 2, (830-841), 10.2514/1.J058515)},
  author={Hermann T, McGilvray M & Naved I},
  journal={AIAA Journal},
  volume={58},
  pages={AU15-AU16},
  year = "2020"
}

BibTeX

@article{performanceoftr-2019/12,
  title={Performance of transpiration cooled heat shields for re-entry vehicles},
  author={Hermann T, McGilvray M & Naved I},
  journal={AIAA Journal},
  volume={58},
  pages={830-841},
  publisher={American Institute of Aeronautics and Astronautics},
  year = "2019"
}

BibTeX

@article{toolforrapidtra-2019/12,
  title={Tool for rapid transient transpiration cooled re-entry simulation},
  author={Hermann T, Naved I & McGilvray M},
  journal={AIAA Journal},
  volume={58},
  pages={842-853},
  publisher={American Institute of Aeronautics and Astronautics},
  year = "2019"
}