Publications

BibTeX

@article{directstrengthm-2026/7,
  title={Direct-Strength Method for Plates with Perforations},
  author={Naraidoo E & Rossi B},
  journal={Journal of Structural Engineering},
  volume={152},
  number={04026077},
  publisher={American Society of Civil Engineers (ASCE)},
  year = "2026"
}

BibTeX

@article{quantifyingtrac-2026/5,
  title={Quantifying trace metal contamination from marine cathodic protection using Saccharina latissima in laboratory and mesocosm exposure experiments},
  author={de Leeuw van Weenen C, Larché N, Rossi B, Pinori E & Appels L},
  journal={Marine Pollution Bulletin},
  volume={226},
  year = "2026"
}

BibTeX

@article{differentialsen-2026/4,
  title={Differential sensitivity of Saccharina latissima (Phaeophyceae) to emissions from corrosion protection systems informs biomonitoring strategies},
  author={de Leeuw van Weenen C, Knoop J, Rossi B, Appels L & Larché N},
  journal={Frontiers in Marine Science},
  volume={13},
  number={1805764},
  publisher={Frontiers Media SA},
  year = "2026"
}

BibTeX

@article{experimentaland-2026/4,
  title={Experimental and Comparative Study of the Corrosion Behavior of Lean Duplex Stainless Steel in Seawater},
  author={Hassanzadeh M, Larché N, Allion‐Maurer A, Dewil R & Rossi B},
  journal={Materials and Corrosion},
  number={maco.70159},
  publisher={Wiley},
  year = "2026"
}

BibTeX

@inproceedings{dependencyoffat-2026/1,
  title={Dependency of Fatigue Resistance on Roughness in WAAM Printed Carbon Steel Components},
  author={Ruan X, Karabulut B, Dobrić J & Rossi B},
  pages={109-114},
  year = "2026"
}

BibTeX

@article{effectofprocess-2025/12,
  title={Effect of process parameters on mechanical properties of cold metal transfer manufactured steel wall structures},
  author={Ruan X, MacDonald S, Dobrić J & Rossi B},
  journal={Thin-Walled Structures},
  volume={217},
  number={113887},
  pages={113887-113887},
  publisher={Elsevier BV},
  year = "2025"
}

BibTeX

@article{anexperimentaln-2025/11,
  title={An Experimental, Numerical and Analytical Study of Local Buckling in Perforated Plates},
  author={Naraidoo E & Rossi B},
  journal={Thin-Walled Structures},
  pages={114269},
  publisher={Elsevier},
  year = "2025"
}

BibTeX

@article{localbucklinglo-2025/10,
  title={Local buckling load of a perforated plate – A computational study},
  author={Naraidoo E & Rossi B},
  journal={Thin-Walled Structures},
  volume={215},
  number={113445},
  pages={113445-113445},
  publisher={Elsevier BV},
  year = "2025"
}

BibTeX

@article{numericalsensit-2025/10,
  title={Numerical sensitivity assessment of key factors influencing residual stress distributions in wire arc additively manufactured components},
  author={Ruan X & Rossi B},
  journal={Structures},
  volume={80},
  year = "2025"
}

BibTeX

@article{generalisednotc-2025/5,
  title={Generalised notch stress method to evaluate the fatigue behaviour of rough and smooth wire arc additively manufactured components},
  author={Ruan X, Karabulut B, Dobrić J & Rossi B},
  journal={International Journal of Fatigue},
  volume={199},
  number={109045},
  publisher={Elsevier},
  year = "2025"
}

BibTeX

@article{atmosphericcorr-2025/3,
  title={Atmospheric corrosion of welded dissimilar T-joints made of steel and improvements in the corrosion prediction model},
  author={Sun S, Liu C, Ferraz G, Karabulut B, Verhoeven B et al.},
  journal={Engineering Failure Analysis},
  volume={170},
  number={109273},
  pages={109273},
  publisher={Elsevier},
  year = "2025"
}

BibTeX

@article{fatiguecrackgro-2025/3,
  title={Fatigue crack growth behavior of wire arc additively manufactured 316L austenitic stainless steel},
  author={Chen Y, Chen M-T, Zhao O, Rossi B & Ruan X},
  journal={Thin-Walled Structures},
  volume={212},
  number={113182},
  publisher={Elsevier},
  year = "2025"
}

BibTeX

@article{designofshortto-2025/3,
  title={Design of short-to-intermediate slender built-up flanged cruciform columns},
  author={Dobrić J, Gluhović N, Filipović A, Samardžić-Petrović M, Ruan X et al.},
  journal={Thin-Walled Structures},
  volume={212},
  number={113181},
  publisher={Elsevier},
  year = "2025"
}

BibTeX

@article{effectofboundar-2025/1,
  title={Effect of boundary conditions on residual stress in cold metal transfer-based wire arc additively manufactured steel components},
  author={Ruan X, Karabulut B, MacDonald S, Dobrić J & Rossi B},
  journal={Materials and Design},
  volume={249},
  year = "2025"
}

BibTeX

@article{thedesignconstr-2025/1,
  title={The design, construction and monitoring of a complex urban excavation in stiff Oxford Clay},
  author={Sheil B, Orazalin Z, Prakhya G & Rossi B},
  journal={Proceedings of the Institution of Civil Engineers Geotechnical Engineering},
  year = "2025"
}

BibTeX

@article{preface-2025/,
  title={Preface},
  author={Baeyens J, Foo KY, Dewil R, Deng Y & Rossi B},
  journal={E3S Web of Conferences},
  volume={635},
  pages={00001},
  publisher={EDP Sciences},
  year = "2025"
}

BibTeX

@article{combinedcompres-2024/12,
  title={Combined compression and bending of austenitic stainless steel I-section members},
  author={Feber N, Jandera M & Rossi B},
  journal={Thin-Walled Structures},
  volume={209},
  number={112819},
  publisher={Elsevier},
  year = "2024"
}

BibTeX

@article{unravelingthepr-2024/10,
  title={Unraveling the Presence and Positions of Nitrogen Defects in Defective g‐C3N4 for Improved Organic Photocatalytic Degradation: Insights from Experiments and Theoretical Calculations},
  author={Liu Y, Chen X, Kamali M, Rossi B, Appels L et al.},
  journal={Advanced Functional Materials},
  publisher={Wiley},
  year = "2024"
}

BibTeX

@article{onthestatistica-2024/9,
  title={On the statistical assessment of the EN 1993-1-9 detail categories for hot dip galvanised steel},
  author={Ferraz G, Karabulut B, Ruan X & Rossi B},
  journal={Engineering Failure Analysis},
  volume={167},
  number={108882},
  publisher={Elsevier},
  year = "2024"
}

BibTeX

@article{fatigueresistan-2024/6,
  title={Fatigue resistance and reliability assessment of hot dip galvanised plates with welded transversal stiffeners},
  author={Ferraz G, Karabulut B & Rossi B},
  journal={Engineering Failure Analysis},
  volume={163},
  number={108577},
  publisher={Elsevier},
  year = "2024"
}

BibTeX

@article{photocatalyticd-2024/5,
  title={Photocatalytic defluorination of ciprofloxacin by nitrogen-defected g-C3N4 under simulated sunlight: Mechanistic insight and pathway analysis},
  author={Liu Y, Kamali M, Chen X, Rossi B, Appels L et al.},
  journal={Chemical Engineering Journal},
  pages={151950-151950},
  publisher={Elsevier},
  year = "2024"
}

BibTeX

@article{fatigueofwirear-2024/4,
  title={Fatigue of wire arc additively manufactured components made of unalloyed S355 steel},
  author={Karabulut B, Ruan X, MacDonald S, Dobrić J & Rossi B},
  journal={International Journal of Fatigue},
  volume={184},
  number={108317},
  publisher={Elsevier},
  year = "2024"
}

BibTeX

@article{bucklingstrengt-2024/4,
  title={Buckling strengths of cold-formed built-up cruciform section columns under axial compression},
  author={Dobrić J, Gluhović N, Fric N, Ruan X, Bock M et al.},
  journal={Thin-Walled Structures},
  volume={200},
  number={111879},
  publisher={Elsevier},
  year = "2024"
}

BibTeX

@article{activationofper-2024/4,
  title={Activation of peroxymonosulfate by Fe,N co-doped walnut shell biochar for the degradation of sulfamethoxazole: performance and mechanisms},
  author={Xue Y, Kamali M, Costa MEV, Thompson IP, Huang W et al.},
  journal={Environmental Pollution},
  volume={355},
  number={124018},
  publisher={Elsevier},
  year = "2024"
}

BibTeX

@article{measurementsofa-2024/3,
  title={Measurements of azimuthal anisotropy of nonprompt D0 mesons in PbPb collisions at s NN = 5.02 TeV},
  author={Tumasyan A, Adam W, Andrejkovic JW, Bergauer T, Chatterjee S et al.},
  journal={Physics Letters B},
  volume={850},
  pages={138389},
  publisher={Elsevier},
  year = "2024"
}

BibTeX

@article{designprocedure-2024/1,
  title={Design procedures for cold-formed stainless steel built-up columns assembled from equal-leg angles},
  author={Dobrić J, Gluhović N, Ivanović J & Rossi B},
  journal={Journal of Constructional Steel Research},
  volume={212},
  year = "2024"
}

BibTeX

@article{stainlesssteeli-2024/1,
  title={Stainless steel I-section beams subjected to combined torsion and bending: Experimental results},
  author={Lauwens K & Rossi B},
  journal={Journal of Constructional Steel Research},
  volume={212},
  year = "2024"
}

BibTeX

@article{onthefatiguebeh-2023/12,
  title={On the fatigue behaviour and reliability assessment of high strength welded details},
  author={Karabulut B, Ferraz G & Rossi B},
  journal={Journal of Constructional Steel Research},
  volume={211},
  year = "2023"
}

BibTeX

@article{naturallyderive-2023/12,
  title={Naturally derived materials to enhance the membrane properties in (waste)water treatment applications - mechanisms, scale-up challenges and economic considerations},
  author={Xue Y, Kamali M, Al-Salem S, Rossi B, Appels L et al.},
  journal={Journal of Water Process Engineering},
  volume={57},
  number={104647},
  publisher={Elsevier},
  year = "2023"
}

BibTeX

@article{awalnutshellbio-2023/11,
  title={A walnut shell biochar-nano zero-valent iron composite membrane for the degradation of carbamazepine via persulfate activation.},
  author={Xue Y, Kamali M, Liyakat A, Bruggeman M, Muhammad Z et al.},
  journal={The Science of the total environment},
  volume={899},
  pages={165535},
  year = "2023"
}

BibTeX

@article{stainlesssteeli-2023/11,
  title={Stainless steel I-section beams subjected to combined torsion and bending: experimental results},
  author={Lauwens K & Rossi B},
  journal={Journal of Constructional Steel Research},
  volume={212},
  number={108230},
  publisher={Elsevier},
  year = "2023"
}

BibTeX

@article{designprocedure-2023/10,
  title={Design procedures for cold-formed stainless steel built-up columns assembled from equal-leg angles},
  author={Dobrić J, Gluhović N, Ivanović J & Rossi B},
  journal={Journal of Constructional Steel Research},
  volume={212},
  number={108263},
  publisher={Elsevier},
  year = "2023"
}

BibTeX

@inproceedings{assessmentofemb-2023/9,
  title={Assessment of Embodied Carbon in a Tied‐Arch Bridge},
  author={Ruck N, Naraidoo E, Liu C, Kamali M, Karabulut B et al.},
  booktitle={Eurosteel 2023},
  pages={489-494},
  year = "2023"
}

BibTeX

@inproceedings{experimentalbeh-2023/9,
  title={Experimental Behaviour of Cold‐Formed Stainless Steel Cruciform Section Columns},
  author={Dobrić J, Fric N, Naraidoo E & Rossi B},
  booktitle={Eurosteel 2022},
  pages={655-659},
  year = "2023"
}

BibTeX

@article{onthefatiguebeh-2023/8,
  title={On the fatigue behaviour and reliability assessment of high strength welded details},
  author={Karabulut B, Ferraz G & Rossi B},
  journal={Journal of Constructional Steel Research},
  volume={211},
  number={108154},
  publisher={Elsevier},
  year = "2023"
}

BibTeX

@article{awalnutshellbio-2023/7,
  title={A walnut shell biochar-nano zero-valent iron composite membrane for the degradation of carbamazepine via persulfate activation},
  author={Xue Y, Kamali M, Liyakat A, Bruggeman M, Muhammad Z et al.},
  journal={Science of the Total Environment},
  volume={899},
  number={165535},
  publisher={Elsevier},
  year = "2023"
}

BibTeX

@inproceedings{microstructurea-2023/1,
  title={Microstructure and corrosion resistance of dissimilar welded joints},
  author={Verhoeven B, Dewil R, Ferraz G, Karabulut B, Sun S et al.},
  pages={919-925},
  year = "2023"
}

BibTeX

@inproceedings{characterizatio-2023/1,
  title={Characterization of 3D printed concrete beams after exposure to high temperature},
  author={Shkundalova O, Molkens T, Classen M & Rossi B},
  pages={380-386},
  year = "2023"
}

@article{prefacei-2023/1,
  title={Preface I},
  author={Baeyens J, Dewil R, Rossi B & Deng Y},
  journal={Environmental Science and Engineering},
  pages={vii-viii},
  year = "2023"
}

@article{prefacei-2023/1,
  title={Preface I},
  author={Baeyens J, Dewil R, Rossi B & Deng Y},
  journal={Environmental Science and Engineering},
  pages={vii-viii},
  year = "2023"
}

BibTeX

@article{anewmethodology-2022/10,
  title={A new methodology to efficiently test pitting corrosion: design of a 3D-printed sample holder to avoid the occurrence of crevice corrosion in chemically aggressive media},
  author={Verhoeven B, Nagels M, Van Aken P, Gaggiano R, Rossi B et al.},
  journal={Journal of Applied Electrochemistry},
  volume={53},
  pages={167-176},
  publisher={Springer},
  year = "2022"
}

@article{barbararossiinb-2022/10,
  title={Barbara Rossi: In between strength and beauty},
  author={Hill C},
  journal={Steel Times International},
  volume={46},
  pages={40-42},
  publisher={Quartz Business Media},
  year = "2022"
}

BibTeX

@article{pittingandgener-2022/9,
  title={Pitting and general corrosion susceptibilities of materials for high level radioactive waste (HLW) disposal},
  author={Verhoeven B, Bogaerts W, Van Aken P, Gaggiano R, Baeyens J et al.},
  journal={Materials},
  volume={15},
  number={6464},
  publisher={MDPI},
  year = "2022"
}

BibTeX

@inproceedings{austeniticstain-2022/9,
  title={Austenitic Stainless Steel I‐section Beam‐column Tests and Numerical Modelling},
  author={Feber N, Jandera M & Rossi B},
  booktitle={SDSS 2022 - The International Colloquium on Stability and Ductility of Steel Structures},
  pages={547-554},
  year = "2022"
}

BibTeX

@article{thepostfireasse-2022/8,
  title={The post-fire assessment of steel structures, a reliability-based semi-probabilistic approach},
  author={Molkens T & Rossi B},
  journal={Fire Technology},
  publisher={Springer},
  year = "2022"
}

@inproceedings{testingdprinted-2022/6,
  title={Testing 3D printed reinforced concrete beams},
  author={Shkundalova O, Molkens T, Rossi B & Classen M},
  booktitle={6th fib International Congress},
  pages={389-398},
  year = "2022"
}

@misc{oralevidencetec-2022/4,
  title={Oral evidence: Technological innovations and climate change: green steel, HC 1093},
  author={Rossi B},
  year = "2022"
}

BibTeX

@article{comparativelife-2022/3,
  title={Comparative life cycle cost assessment of (lean) duplex stainless steel in wastewater treatment environments.},
  author={Nagels M, Verhoeven B, Larché N, Dewil R & Rossi B},
  journal={Journal of environmental management},
  volume={306},
  pages={114375-114375},
  year = "2022"
}

BibTeX

@article{corrosionbehavi-2022/2,
  title={Corrosion behaviour of lean duplex stainless steel in advanced oxidation process (AOP) based wastewater treatment plants},
  author={Nagels M, Verhoeven B, Larche N, Dewil R & Rossi B},
  journal={Engineering Failure Analysis},
  volume={136},
  number={106170},
  publisher={Elsevier},
  year = "2022"
}

BibTeX

@inproceedings{beamcolumnbehav-2022/,
  title={Beam-column behaviour of stainless steel I-section members},
  author={Feber N, Jandera M & Rossi B},
  booktitle={IABSE Symposium, Prague 2022: Challenges for Existing and Oncoming Structures},
  pages={369-376},
  year = "2022"
}