Skip to main content

Research Studentship in Solid Mechanics and Materials

Research Studentship in Solid Mechanics and Materials

3.5-year DPhil studentship 

Project title: Understanding Hydrogen-Uptake and Embrittlement in Hydrogen Fuel Systems for Sustainable Aviation

Supervisors: Prof Felix Hofmann, Dr. Daniel Long

Green hydrogen, generated using energy from renewable sources, has great potential as a zero-carbon fuel for hard-to-decarbonise industries such as aviation. However, hydrogen can readily enter the alloys used in the fuel system, and cause a loss of ductility, an effect known as hydrogen embrittlement (HE). This is a major concern for the design and operation of future hydrogen-fuelled jet engines. To make these engines a reality, HE must be fully understood and mitigated across the full range of pressure, temperature, hydrogen and mechanical loading conditions anticipated in service. This DPhil project, funded by Rolls-Royce and the University of Oxford, is a key part of tackling this challenge.

Previously, during the Rolls-Royce led HYEST (Hydrogen Engine System Technologies) research program, we have developed a computational framework for the prediction of hydrogen uptake and transport. It allows us to model how hydrogen concentration will evolve under the action of complex hydrogen boundary conditions, mechanical loading, and non-uniform temperature fields. A core aim of this DPhil project is to validate these predictions using a novel experimental setup that allows the simultaneous application of mechanical loading and elevated temperature to pipe-like specimens internally pressurised with hydrogen. This setup will be used to study hydrogen uptake and redistribution as a function of sample geometry, temperature distribution, mechanical loading and hydrogen pressure. To quantify the resulting distribution of hydrogen, different approaches can be used, e.g. Thermal Desorption Spectroscopy (TDS) on sample sections, Secondary Ion Mass Spectrometry (SIMS) or neutron imaging of hydrogen. By making a direct comparison to a digital twin of the experiment, the reliability of our hydrogen transport predictions will be tested.

The next goal of this DPhil project is to extend our computational framework to capture how local hydrogen conditions drive HE. To inform this, new experimental data will be gathered on the HE susceptibility of different candidate material systems, such as stainless steels and nickel alloys. Importantly, these tests should mimic the temperature, hydrogen and mechanical loading conditions anticipated in different parts of the hydrogen fuel system. Key questions to answer are: What level of HE is seen as a function of conditions? How is fatigue performance affected? Do these in situ experiments reveal additional failure mechanisms not captured by conventional approaches experiments on pre-charged specimens? These new results will be used to determine which failure mechanism dominates when, which will be used to inform simulations. Further, this work will help to identify “optimal” fuel system materials that are resistant to HE.

At Oxford you will be part of a lively community of researchers working on hydrogen-material interactions, as well as hydrogen-fuel systems more widely as part of the large EPSRC-funded program grant “Making Hydrogen Work in Zero-Carbon Jet Engines”. You will also be part of the Solid Mechanics and Materials Group, which holds weekly seminars and student-organised activities.

Eligibility

This studentship is funded by Rolls-Royce and the University of Oxford. It is open to Home and Overseas students.

Award Value

Course fees are covered at the level set for UK students (at least £10,940 p.a.). Please note that Overseas students are responsible for paying the difference in Home fees and Overseas fees, for the first year this difference is expected to be £25,320 and is likely to be at least this amount for a further two years. The stipend (tax-free maintenance grant) is at least £21,805 p.a. for the first year, and at least this amount for a further two and a half years.

 

Candidate Requirements

Prospective candidates will be judged according to how well they meet the following criteria:

  • First Class degree in Engineering, Material Science, Physics, or other relevant discipline.

  • Strong mathematical and analytical skills.

  • Excellent written and spoken English communication skills.

  • Willingness to spend several weeks per year travelling to international collaborators and science facilities for experimental work (expenses will be covered).

The following skills are desirable but not essential:

  • Ability to program (e.g. in Matlab, Fortran or Python)

  • Enthusiasm for experimental work

  • Enthusiasm for modelling/simulation work.

Application Procedure

Informal enquiries are encouraged and should be addressed to Professor Felix Hofmann felix.hofmann@eng.ox.ac.uk.

Candidates must submit a graduate application form and are expected to meet the graduate admissions criteria. Details are available on the course page of the University website.

Please quote 27ENGMM_FH in all correspondence and in your graduate application.

Application deadline: noon on 2 December 2026 (In line with the University admissions deadline set by the University)

Start date: October 2027